Bandsaw Blade Welding Machine

The device is designed and produced with independent intellectual property rights for semi-automatic butt welding the band saw blade through further research and innovation according to years of experience and suggestions from the end users basing on the Saw Blade Welding Machine. The complete set of bandsaw blade butt welding devices includes 1set of Movable Working Table,1set of Bandsaw Blade Cutting Machine,1set of Main Butt Welding Machine and 1set of Welding Seam Grinding Machine. I. AHE-080MM Series Bandsaw Blade Shearing and Cutting Machine 1.Saw Blade Cutting Machine is designed for burr-free,no distortion,square cutting of saw blade ends. 2.Cutter knives are manufactured from special tool steel for long life with multi-blade. 3.Adjustable welding stops for matching the tooth pitch of different kind of bandsaws. 4.Handle clamping jaws for non-slip clamping of strip during cutting process. 5.Various models for different strip widths and cross sections,manually or pneumatically operated,for single or double cutting. II. SMH-060MM Series Bandsaw Blade Welding Seam Grinding Machine 1.Grinding machines for deburring of welding seam with three-phase motor,on or off switch and working height adjustment. 2.Manual excentric clamping device and pneumatically operated clamping device are both available. 3.Infinitely variable grinding speeds by control knob. 4. Additional lever for precise adjustment of grinding head. III.WT-1200KG Series Movable Working Table 1.Movable Table on 4 wheels and easy to move,can fix on the land by lock the wheels. 2.The drawer is used for putting and depositing hand tools or spare parts 3.Can separate into some small parts easily to save the space and convenient for delivery and transportation. 4.Can hold the weight more than 1200KG. BAS-050MM Bandsaw Blade Butt Welder Main Principle and Features Manual clamping,the motor drives the cam to upsetting and butt welding,then annealing manually. 1.Adopt manual clamping handle device and motorized cam mechanism,no need air source and air compressor, convenient to use. 2.Butt Flash is produced by motorized cam disc. 3.Upsetting force is produced by precisely adjustable spring loaded mechanism. 4.Annealing voltage is freely adjustable and Annealing time can be set from 0 to 10 minutes. 5.Automatic pressure relief during annealing process. 6.Basing on producing request,also can install the water cooling system to the basic and key welding electrodes. .Butt Welder Main Technical Parameter Technical Parameters BAS-050MM Rated Power at 50% Rated Duty Cycle 4.5KVA Max Butt Welding Width Wood-cutting Bandsaw Blade 3-50mm Bi-metal Bandsaw Blade 3-42mm Tungsten Alloy Bandsaws Blade 3-42mm Stainless Steel Bandsaw Blade 4-35mm H.S.S Bandsaw blade 4-35mm Band knives for leather and foam 4-50mm Steel Strip 3-50mm Welder Approx.Weight 280KG

Gw4028 are horizontal metal band saw, mainly used for cutting various ferrous and nonferrous metals. It is characterized by narrow cuts, energy saving, high precision, easy to operate and high efficiency. -+main featuresf+ O if has the feed speed of autocontrol and rapid lift of band saw after cutting. O simple and convenient operation and maintenance. O hydraulic-controlled blade tension. Wooden case, overall size (l x w x h) Mm:1800f-1150f-1200, net weigh (kg):680

Supplier: Bandsaw blade, bandsaw blade for wood cutting, saw blade, bandsaw machines, bandsaw blade welding machine
Buyer: Bandknives blade

Supplier: Power semiconductors, like diodes, thyristors, modules, bridge rectifiers, rotating assemblies, surge suppressors for inverters, ups, battery chargers, furnaces, dc drives, apfc panel, eot cranes, welding machines, etc
Buyer: Silicon chips, molybdenum discs

Welding Machine for All Kinds of Bandsaw Blades, Band Knives, High Carbon Steel Strip and Lower Carbon Steel Strip. Main Descriptions and Advantages 1. Vertical hydraulic clamping cylinders, much more stable. 2. Pneumatic upsetting cylinder. 3. Automatic Thyristor annealing device with infrared thermometer which can set and control the annealing temperature. Annealing time and voltage is also adjustable. 4. Automatic butt welding and annealing process. 5. Computerized Automatic Welding and Annealing Controlling System which can set the welding current, upsetting force, welding time, and other welding parameters easily. Main Technical Parameters Paramaters and Model BAS 100 Capacity at 50% Duty Cycle 50% 25KVA Metal Bandsaws (Bi-metall,Tungsten) 15-81mm, 0.591 - 3,189 Wood-Cutting Bandsaws 15-100mm, 0.591 3937 Stainless Steel Bandsaws 15-50mm, 0.591 1.969 Bandknives for Leather, Foam 25-800mm ,0.984 3.150 Steel Strip (Ordinary) Max Cross Section 200mm Steel Strip Max Clamping Width 100mm Net / Gross Weight 600KG / 700KG Packing Dimensions (L x W x H) 130X100X175CM

1.Model: ZHY-GP-20A 2.Input AC: 380V 50Hz 3.Operating power range: 340~430V 4.Oscillating frequency range: 50~150KHz 5.Maximum oscillating power: 20KW 6.Maximum output power: 16KW 7.Duty cycle: 100% 8.Cooling water flow/pressure: 20L/min 0.1~0.3MPa High frequency machine features 1.High frequency induction heating machine adopt MOSFET. High frequency, energy saving and steady. 2.Heating speed is fast and high efficiency. 3.Only heat the part need to be heated, little distortion. 4.Short heating time. There is no oxide layer on the surface of the workpiece. 5.Easy operation, good working environment and no pollution. 6.Control heating temperature and heating time easily. Ensure heating quality and could achieve line production.

Spare Parts Of Tig & Mig Welding Machines

Application Hongcong gasoline welding-cutting machine features an energy-saving rating over 80%, namely, 3 liter gas consumed in the machine equals to that of 1 bottle£¨40liter£©of acetylene, while the operation is the same to the acetylene torch with a higher performance, the fire may reach 2800-3000¡æ (adjustable) via mixture of aero explosion-proof material, atomized quadratic nanometer gasoline molecule and oxygen molecule, and available to cut steel, cast iron, stainless steel, cast aluminum, wrought aluminum and copper material. Hongcong gas welding-cutting machine also characterizes an easy operation, high speed, smooth welding, tiny cutting seam, flat slot, no slag, no flashback with an extensive cutting thickness between 0.5-400mm to eliminate the danger in operation, high cost, low efficiency, heavy waste and severe pollution of the acetylene torch. Hongcong gasoline welding-cutting machine has been ever more extensively used in iron & steel, shipbuilding, railway, petroleum, metallurgy, mining, machinery and other manufacturing industries to rate a longevity up to 15 years, it also features easy operation, explosive-proof installation, fine cutting, speed welding and cutting, convenient and extensively-adopted. Packing list HCQZ30 type Handgrip gasoline cutting torch¡­¡­¡­¡­¡­1pcs HCQZ30 type cutting nozzle 1#~3#..................................... 3pcs 3 cutting nozzles: 1#- can cut steel sheet 3~10mm thickness 2#- can cut steel sheet 10~20mm thickness 3#- can cut steel sheet 20~40mm thickness HC20-1 type handgrip welding torch¡­¡­¡­¡­¡­¡­¡­¡­¡­1pcs HC20 welding nozzle(1#~3#)¡­¡­¡­¡­.¡­¡­¡­¡­¡­¡­¡­..1set 11Liter gasoline tank explosion-proof¡­¡­¡­¡­¡­¡­¡­¡­..1pcs 10m oil-resistant and fire proof rubber hose (optional longer add $2.00 per meter) A tool box with relational tools and spare parts Instruction and certification and Warranty sheet Optional configuration 1- HCQZ100 type Handgrip gasoline cutting torch 1pcs with 3 cutting nozzles (cut range 30~100mm) 2- HCQZ300 type Handgrip gasoline cutting torch 1pcs with 4 cutting nozzles (cut range 100~300mm) 3- HC-50 type semi-automatic cutting torch 1pcs without nozzle (Which can be refitted to the acetylene semi-automatic cutting machine of Chinese standard instead the acetylene cutting torch.) 4- HC-80 type profile cutting torch 1pcs without nozzle (Which can be refitted to the acetylene CNC cutting machine of Chinese standard instead the acetylene cutting torch.) 5- HC-60 type Handgrip gasoline heating torch 1pcs with 2 cutting nozzles (hard flame and soft flame) 6- Nozzle