Voltage 1.8/3.6 up to 26/35KV
XLPE power cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.
Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of A, B, C.
Our XLPE power cable can be manufactured according to IEC 60502, IEC 60332, and IEC 60754. Some of indexes are superior to above international standard IEC.
Some of special XLPE power cable can be manufactured according to the other standards required by customs.
XLPE power cable having higher long-term working temperature and greater current rating, at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable. This is not only improve the quality and properties of products, but also reduce cables production costs.
MV power cable are rated up to 18/30 (36) kV and manly used in MV distribution network. The conductors are copper or aluminium , mostly compacted stranded to shape round insulated core. Their size range from 25 up to 630 sq mm per core and 3 insulated corer are laid up to assembly a cable. Any cable prtections may be applied , including construction and material for direct burial , longitudinal and /or water tightness, anti termite and fire safety.
Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum meeting the requirements of ANSI/ICEA S-97-682. Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer. Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III as defined in ANSI/ICEA S-97-682. Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation. Copper Wire Shield: Helically applied annealed solid bare copper wires with a lapped non-metallic tape serving as a binder/separator. Jacket: Black, non-conducting, sunlight-resistant (PVC) or LLDPE.
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
Supplier: Medium voltage power cables
POWER CABLE, Medium voltage cables armoured
POWER CABLE Medium voltage cables Please contact us for for details catalogue
The cable design conforms to the requirements of national standard GB/T12706-2008 and IEC60502 recommended by international Electrotechnical Commission. The normal operating temperature of the conductor of polyvinyl and XLPE insulated cable is 70â?? and 90â?? ,Xlpe cable not only has excellent electrical performance, high working temperature, large transmission capacity, but also has the advantages of simple structure, small outer diameter, light weight, easy installation and use, and unrestricted laying drop. It is widely used in industrial and mining enterprises and urban power grid.