This product is SiC castable developed by using high purity SiC raw material as the main material, pure calcium aluminate cement and micro powder as the binder, with high high temperature strength and wear resistance, and can be poured, sprayed and daubed.It can be used in waste incinerator, blast furnace body, cyclone furnace, effervescent furnace and boiler, etc.
The advantages of silicon carbide refractory castable lie in its high heat conduction, low thermal expansion, and no reaction with slag. It has been used as slag reaction and high temperature peeling kiln site for a long time. The disadvantage of silicon carbide refractory is that the chemical properties are very unstable under certain atmosphere.In oxidation gases such as oxygen, water vapor, carbon monoxide, carbon dioxide) easy to corrode, iron oxide, etc, are easy to be in the hot metal and vacuum oxidation decomposition, the downside is that the refractory castable with carborundum dissolved water, in water system such as castable monolithic refractories, sometimes illiquid caused the density of silicon carbide refractory castable is bad, the third weakness is lack of sintering, hard to get high strength, but sometimes it is difficult to produce sintering and contraction, in monolithic refractories is a virtue.
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Refractory Grade Silicon Carbide 98% SiC Have a large inventory, Be ready for shipment.
Black silicon carbidedescription Black silicon carbide is produced at high temperature in an electric resistancetype furnace with quarts and petroleum as its main raw materials. Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused fused alumina. It is brittle and sharp and has electrical and heat conductivity in some degree. The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive. Company introduction Our company was established in 1976, is a famous manufacturer of abrasive powder in china. Our company supply types of abrasive, including black silicon carbide, white fused aluminum oxide. The specification and f, p, jis standard graded powder is available on request. Otherwise, our company owns the laboratory. Our abrasive sell well in china and through-out the world. Black silicon carbidestandard Black silicon carbide f12 - f1500, standard: gb/t 2481.2-1998, iso 8486-2: 1996, jis r6001-1987. Black silicon carbideapplication Sand blasting, coarse grinding, boned abrasive tools Polishing, lapping, wire sawing Refractory material Black silicon carbidepackage P.V.C 25kg small bags + jumbo bags or pallets P.V.C 25kg small bags + jumbo bags or pallets
Technical parameter The rated power of the area of hot zoneª1450f¦ The ways of mark the dimensionªgc d/l/m/d D --hot zone diameter ffd-- cold end diameter M --cold end lengthff n-- the length of spray aluminium zero L-- hot zone lengthff l --total length Our sic heating elements adopt special technics and can save you energy. Silicon carbide (sic) heating element is a non-metal electric heating element made from sic as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc. Used in the industries of glass, ceramic, machinery, analysis test, semiconductor, science & research and so on.
Our company has the domestic advanced production line of silicon carbide particle size sand, silicon carbide powder production line, silicon carbide ceramic products production line, Silicon carbide micro - powder channel reactor production line and related core intellectual property rights to produce different specifications of section sand, mesh sand, fine powder and ultrafine powder. Can meet the needs of different customers.With anthracite as smelting raw material, silicon carbide products have low ash content, low sulfur, low phosphorus, high calorific value, High mechanical strength, high chemical activity, high specific resistance and other characteristics, is the world's highest quality level of silicon carbide products.The product is widely used in abrasive products refractory, deoxidizer used in iron and steel bonding anti-slip materials, petrochemical, dust chemical industry and other industries.In mining metallurgy, metal, furnace, machinery, iron and steel, energy, environmental protection, electronics, semiconductor, aerospace, automobile and other industries, silicon carbide new technology in Rico optical materials, thin film materials, radiation resistance devices, high temperature pressure sensors, ultra-high pressure detectors and other fields show a wider application prospect.
silicon carbide 98 -99 silicon carbide 96 silicon carbide 95 silicon carbide 85
1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant material in smelting. 2. It can also be used as grinding material, can be used to manufacture grinding tools, such as grinding wheel, whetstone, grinding head. Properties: Silicon carbon is a new type of steel deoxidizer and ideal heat preservation agent for deoxidization. The power consumption can be reduced by 15-20kw/h by using 1-4kg/t, and the productivity can be increased to 8-10% by reducing the time of 15-20min per furnace All grade we can supply
Place of Origin: China Material: Silicon Carbide (SiC) Color: Black/grey Material: Silicon Carbide Ceramics Volume density: 3.10-3.15 g/cm3 Max temperature: 1600C Silicon carbide content: 98% Flexural Strength: 400 MPa Hardness 92 HRA Size: Customizable Application: Industrial Furnaces Supply Ability: 5000000 Piece/Pieces per Month Packaging Details: Standard exporting packing Port of shipment: Xiamen Lead Time  :15-30days Payment term: T/T,L/C etc.
