Foot Operated Valve

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

Advantages: 1) mvfa series pneumatic aluminium foot valve 2) fast delivery 3) best service 4) huge selection of products 5) best service Specification: 1) model: Mvfa230 Mvfa240 2) operation type: Direct drive type 3) fluid medium: 40 micron filtered air 4) position and way number: Two-position three-way Two-position four-way 5) working pressure: 0.2--0.7mpa(29--102psi) 6) proof pressure: 1.0mpa(145psi) 7) effective orifice: 8 m 8) material: Aluminium alloy 9) weight: 680g 780g

* The Gear Box Operated Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements

Martin, a purchaser of American company PowerTeam, sent an email last week saying that he saw on the Internet that AAK was a hydraulic valve supplier of some European hydraulic pump companies. He wanted to know whether the quality of AAK could match the quality of the hydraulic valve produced in the United States he was currently using. I directly answered that the quality of hydraulic valves in the United States should also be in different levels, you can have a small try and compare them with your hydraulic valves purchased in the United States. Martin frankly told about his current purchasing status. He needed to re-purchase a batch of hydraulic sequence valves for hydraulic pumps. After placing an order with the original manufacturer in the United States, the manufacturer told him that there were not enough labor for mass production at this moment. He had to wait for 3 months at least. The owner was not satisfied with his purchasing arrangement and asked him to find a new supplier of hydraulic sequence valve and complete production within 2 months. Martin is a little embarrassed because this hydraulic sequence valve has particularly high requirements for various accuracy. In the early stage of development 3 years ago, he contacted more than 20 hydraulic valve manufacturers, compared and tested the hydraulic sequence valves from them, and only the samples from the local hydraulic valve manufacturer in the United States met the requirements. Martin saw the information of AAK to found that it was actually the supplier of hydraulic pumps in Europe. After browsing AAK website (www.aakindustry.com), he felt that AAK hydraulic valve might become his supplier. According to the drawings and working conditions of his hydraulic sequence valve, we found that it does have high requirements for the accuracy of the hydraulic sequence valve. I told Martin that we need 15 days to make and test samples. After the samples of the hydraulic sequence valve pass the test, we will discuss the order at that time. 10 days after the hydraulic sequence valve sample was sent, Martin emailed AAK that the hydraulic sequence valve fully met the production requirements of the existing hydraulic pump. At the same time, the engineers of PowerTeam also applauded every detail of AAK hydraulic sequence valve sample, which was no worse than that of the American company. In particular, some core parameters, such as the matching surface roughness of AAK hydraulic sequence valve spool and valve hole, can reach Ra value of 0.1 ~ 0.2�¼m. The surface roughness Ra value of the outer circle of the valve spool is 0.1m. The Ra value of the inner circular surface of the valve hole is 0.2m. Some parameters are even higher than those of his original American manufacturer, including 100% burr removal.