Valves End-Armaturen

Germany ebro armaturen pneumatic valves type: ebro z014-a dn200 pn10 ebro z014-a dn65 pn16 ebro z014-a dn80 pn16 ebro z014-a dn150 pn10 ebro z014-a dn150 pn16 ebro eb6dw g=17 for z014-a dn150 pn16 ebro eb6dw g=17 for z014-a dn150 pn10 ebro eb5dw g=14 for z014-a dn80 pn16 ebro eb8dw g=17 for z014-a dn200 pn10 ebro eb4dw g=11 for z014-a dn65 pn16 ebro eb4dw g=11 for z014-a dn65 pn16 ebro eb8dw g=17 for z014-a dn200 pn10 ebro eb6dw g=17 for z014-a dn150 pn16 ebro eb6dw g=17 for z014-a dn150 pn10 ebro eb5dw g=14 for z014-a dn80 pn16 ebro t211-a pn10 dn100 ggg40.3 ptfe with eb6 dw ebro z011-a dn100 pn16 ggg40 1.4408 10bar epdm with eb5.1 syd ebro z011-a dn100/pn16 liner:epdm disc:1.4408;shaft:1.4 handlever ebro z011-a dn65 pn16 epdm disc1.4408/shaft1.4104 handlever ebro t211-a pn10 dn100 ggg40.3 ptfe with eb6 dw ebro z011-a dn100/pn16 liner:epdm disc:1.4408;shaft:1.4 handlever ebro t211-a pn10 dn100 ggg40.3 ptfe with eb6 dw ebro z011-a; dn350; pn=1.0 mpa; epdm ebro 4903208 for eb 6 ebro msk04

Germany ari armaturen control valve stevi 440-g/441-g(dn15-100) ari-predu-ansi ari-predu ari-temptrol stevi 405/460(dn15-250) stevi 405/460(dn300-500) stevi 440/441(dn15-150) stevi 440-g/441-g(dn15-100) stevi 445/446(dn15-150) stevi 470/471(dn15-150) stevi 470/471 (1”-8”), stevi 422/462(dn200-250) stevi 425/426(dn300-500), stevi 450/451(dn15-150) stevi 423/463(dn200-250) stevi h 485/487(dn15-100 bzw. Dn15-50) stevi h 486/488(dn15-100 bzw. Dn15-50)..

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

Screwed End Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option