General Features
Size Universal
Colour White
Packaging 20 masks per box
Optional design Cupped or folded
Optional feature Valved or nonvalved
Safety Features
CEcertified FDAcleared
In accordance with the European standard EN 1492001A12009
Filtration efficacy of PM25 99
Filtration efficacy of PM03 99
Disposable
Inward leakage lt2
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic headbands for a more secure maskadjustment
High fit effectiveness
Less moisture and heat buildup valved respirators
More lightweight and easier to carry nonvalved respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against variousnonoily airborne contaminants It is extremely effective 99 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA EN 1492001A12009
Our FFP3 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your FFP3 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Decide for yourself
Vannin Healthcare Global is one of the rare suppliers who let you choose your FFP3 masks design at no additional cost If youre indifferent about the design of your respirator or just want to surprise your future self feel free to skip this step
Choose the design Cupped or Folded
Moulded or cupped masks were made with your physiognomy in mind They were designed to better fit your face firmly preventing leakage However they might be impractical if you want to carry them in your pocket Remember if your mask gets damaged its best to just throw it away
Folded masks on the other hand you can easily carry around in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask
I want the folded FFP3 respirator mask
The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masksfor safety reasons Th
General Features
Size Universal
Colour White
Packaging 20 masks per box
Safety Features
CEcertified FDAcleared
In accordance with the European standard EN 1492001A12009
Filtration efficacy of PM25 99
Filtration efficacy of PM03 94
Disposable
Inward leakage lt8
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic headbands for a more secure maskadjustment
High fit effectiveness
Less moisture and heat buildup valved respirators
More lightweight and easier to carry nonvalved respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA EN 1492001A12009
Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Folded Design
You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks
Valved
The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles
nbsp
Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to
Take the mask in one hand so that the nose clip is turned upwards
Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
Cup Mask FFP3 Cup Shaped face Mask With Valve For Head LoopÃ?Â
Cup style Half face Respirators ffp3 face mask cup shape mask ffp3 cup mask with valve
Braided headbands with dual point attachment help provide a comfortable and secure seal. M-noseclip adjusts easily for fewer presure points.
educes heat build-up inside the respirator. Making it suitable for work situations involving heat, humidity, or long periods of wear.
Adcanced electret media is designed for ease of breathing and the cup shape design helps make the respirator feel spacious and durable.
Quality FFP3 cup shaped Face Mask - Highest Standards
Material:PP non woven, soft cotton, melt blown filter
Function:Anti Pollution,Dust,Pm2.5,Smog,Fog,Pollen Etc
Easy Mask Solution Breathable
Masks For Men & Women
The adjustable head strip can better fit face, comfortable and not tight and avoiding fogging your glasses. They are suitable for a variety of face shapes
DESCRIPTION :
Anti Dust Disposable Face Mark KN95 5Ply Face Mask (With Valve)
Name: KN95 earloop face mask
material: non-woven, soft cotton, melt blown filter TOTAL 5 LAYER
Color:White
Size:12.5*10.5cm
function:daily protection of PM2.5, micro particles, droplets, epidemics,
etc
Certification:CE and FDA
Model No :
KN95 Valve
. Quantity Pcs ;
3
Packing details :
25pcs per box,
60boxes/ctn,1,500pcs/ctn,
G.W.:13.5kgs,carton size:52*43.5*57cm
-Air filled cushion to provide safety and comfortable use.
-Suitable for use in respiratory care of anaesthesia & resuscitator.
-Body with antistatic property.
-Good grip.
-Material : Silicon.
-Size: 0,1,2,3,4,5
-Suitable use in respiratory care of anaesthesia and resuscitator.
-Body with antistatic property.
-Good grip.
-Material : Black Rubber
-Size: 0,1,2,3,4,5
Brand - Honeywell
Model Name/Number - 54001M
Type - Respirator Mask
Color - Black and Purple
Material - Polycarbonate
54001 M Vision Full Face Respirator Mask
The Honeywell Polycarbonate 54001 M Vision Full Face Respirator Mask is a top-of-the-line mask designed to provide maximum protection for the wearer. It is made from a durable polycarbonate material that is resistant to impact and heat, ensuring that it can withstand even the toughest work environments.
The mask features a full-face design that covers the entire head, providing complete protection against hazardous particles and gases. It has a wide field of vision, thanks to its panoramic lens design, and is equipped with a comfortable and adjustable head harness to ensure a secure fit. The mask is compatible with a variety of Honeywell cartridges and filters, allowing the user to customize it for different applications.
Whether youâ??re working in a factory, laboratory, or other hazardous environment, the Honeywell Polycarbonate 54001 M Vision Full Face Respirator Mask is the perfect choice for keeping you safe and protected.
Benefits in brief:
The best value you can find in a full facepiece.
North innovation, quality and attention to detail
Economically priced mask with many features
