Industry Air Hepa Filter H13
Mini-pleat HEPA filter ( Gel gap Mini-pleat HEPA filter 95%/ cassette/ceiling type air filter )
Minipleat HEPA filter is compact design. In case of similar installation sectional module, it has larger filtering area, higher air flow and lower air brag. The filtering rate against MPPS(Most Penetrating Particle Size, of 0.1um-0.3um diameter) is higher than 99.5%.
Advantage For Air Hepa Filter H13
·High efficiency(capturing 0.3-0.5μm particles)
·Low resistance
·Thin thickness(minimum:25mm)
·Light weight
·Easy to install
·Each filter has scanning test
The fan filter unit (FFU) is an air self-cleaning device that is equipped with both a primary and high-efficiency two-stage filter device. The air intake comes through the fan top, and is filtered through the two stage filter device. Clean air is then sent out through the outlet.The device can be installed indoors on the ceiling or mounted on a shelf. It can also be arranged in a single or multiple assembly lines, so that the purification level reaches class 100 according to different requirements. In addition, the FFU can also be used to supply air for the terminal in a clean room.
A suitable solution for. Airborne substances, viruses and other fine particles in the nanoscale range are filtered out of the air with a separation efficiency of 99.995 % and the activated charcoal filter also removes odours. The integrated CO2 sensor alerts you should additional ventilation be required.
Clean air equipment, such as fume hoods, air purifiers, and HEPA filters, ensures a safe and contaminant-free environment in labs. These devices help remove harmful particles, gases, and fumes, protecting both the samples and the researchers.
A fan filter unit (FFU) is a of type of air filtering equipment. It is used to supply purified air to cleanrooms or microenvironments by filtering out harmful airborne particles from recirculating air. The units are installed within the system's ceiling or floor grid. Large cleanrooms require a proportionally large number of FFUs, which in some cases may range from several hundred to several thousand units often contain their own pre-filter, HEPA filter and internally controllable fan air distribution. OEM
External frame£ºStainless steel 304 or cooled-rolled spaying steel Or galvalume Fan: low vibration, low noise; EBM on request air flow : 0.45 m/s Purification at the highest level: 100 levels Efficient filter: domestic glass fiber filter System control mode: DC or AC Use the highest temperature, humidity£º80¡æ¡¢80% XN-FFU-122S/z 1220/610/340 XN-FFU-117S/Z 1170/570/340 XN-FFU-61S/Z 610/610/340 XN-FFU-57S/Z 570/570/340.
HEPA Filter Combination HEPA filter
HEPA Filter. Longer Life and available to saving space Various Frame Material Applications : Semi-conductor lndustries, Electron and Medical Initial Pressure Drop : below 15mmAq Efficiency : Over 99.97~99.99% on 0.3§ Particle
Without gasket size:610mm*610mm*69mm Efficiency:H13 Frame£ºAluminum Frame Media:Fiberglass Filter Paper Faceguard:Aluminum Net 635mm*635mm*100mm about 3kg
Introduction: HEPA mini-pleat filter is space saving and light weight. It is absolutely the best choice for cleanrooms and clean bench equipment. It is made of mini-pleated filter element., large air filtration area, low cost price, large air flow, large dust holding capacity and long life-span. It is used in a variety of industries including semiconductor and microelectronics, pharmaceutical, bio-medical, research facilities, and food processing. Carton packing, then several cartons by one pallet.
Characteristics: * High efficiency,low resistance,good uniformity winds. * Applicable to various local purification equipment and clean workshop end filtration,air conditioning systems, food processing and beverage. * Strong air velocity and discharge dust rapidly. * The frame is aluminium,MDF or galvanized steel. Carton packing, then several cartons by one pallet.
