Description:
Drift Diameter Gauge is a special tool for testing the diameter of downhole tubular. It is mainly used to test whether the diameter of the inner diameter of the casing, tubing, drill pipe, etc. meets the standard, and is a commonly used testing tool for underground operations.
Picture:
Description: Drift Diameter Gauge is a special tool for testing the diameter of downhole tubular. It is mainly used to test whether the diameter of the inner diameter of the casing, tubing, drill pipe, etc. meets the standard, and is a commonly used testing tool for underground operations.
Drift Diameter Gauge is a special tool for testing the diameter of downhole tubular. It is mainly used to test whether the diameter of the inner diameter of the casing, tubing, drill pipe, etc. meets the standard, and is a commonly used testing tool for underground operations.
Spline plug gauge is required to inspect the internal spline component.
Magnet-helix indicating mechanism ideal for low DP measurement A wide selection of ranges from 0Pa to 60Pa at up to 30KPa Accuracy 2% of FS Inertia-free, drift-free pointer indication Identical mounting dimensions to Model 2000 from Dwyer OEM solutions available The series A2 DP gauges are designed to measure positive, negative, or differential pressure of low air and non-corrosive gases with a full span accuracy of 2% at a competitive price. They are widely used for filter condition checks, HVAC control, and the measurement of fan and blower pressures, air velocity, and pressure drop across orifice plates applications, as well as other applications in the pharmaceutical and semiconductor manufacturing industry. Service: Air and non-combustible, compatible gases Ranges: See Range Selection Chart Accuracy: ¡À2% of full span at 21¡æ (¡À3% on A2-0.50IN, A2/Z-0.5IN, A2-10MM, A2-100Pa, A2-125Pa and ¡À4% on A2-0.25IN, A2-6MM, A2-60Pa ranges) Ambient Temperature: -7 ~ 60¡æ Pressure Limit: -68 ~ 100KPa Overpressure: Relief plug opens at approximately 15Psig (100KPa) Process Connections: 1/8" female NPT duplicate high and low pressure taps: one pair side and one pair back Case and Bezel Material: Die cast aluminum Weight: 460g Dial Size: 4" Diameter Mounting Position: Vertical Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter, and three flush mounting adapters with screws. Single one: 15*10*5CM. The gross weight for one is about 0.59KG. 24 pcs A2 will be packed in one carton box: 60*48*20CM, the gross wieght for one box is about 15KG.
Reference Standards: TSGZF001-2006, GB-T12242-2005, GB-T12241-2005, GB-T12243-2005 Range of application: applicable for the set-pressure, setback pressure and sealing tests of direst loaded and pilot-operated safety valves. Technical Parameters: Maximum drift diameter: DN400mm Maximum test pressure: 60Mpa Pressure test precision: pressure gauge of 0.4 grades (Users can choose a more precise one.) Test medium: nitrogen, compressed air or clean water (Gas liquid dual-capable one can be designed.) Functions and Characteristics: The equipment has advanced design principle. It uses pneumo-hydraulic booster pump as its clamping pressure source and air driven gas booster pump as its test pressure source. A gas cylinder is equipped, which enables the test to be conducted continuously. â?¢The test pressure is adjustable and the process of pressurization is stable. â?¢Clamping pressure source and test pressure source can use imported booster pumps from America or Germany, which have a wide range of output pressure. â?¢All the manual high pressure valves, pipe fittings and connectors are imported ones, which guarantee their pressure levels, safety and reliability. Most gas and liquid media are available. MAQ-400 /48BA Functions and Characteristics: Maximum drift diameter: DN400mm Maximum test pressure: 48Mpa Pneumatic control hydraulic clamping device is adopted. Clamping force is adjustable. The equipped pressure gauge displays the corresponding clamping force and provides a comparison table between the pressure and the clamping force, which facilitates operators to choose appropriate lamping force according to the safety valve calibration pressure and the drift diameter. All the valves, pipe fittings and connectors are made of stainless steel. The test is operated manually and operators record the data. The system includes two test and calibration tables. One is equipped with two clamping devices. There are totally three clamping devices: one is for safety valves of DN15-DN100; one is for safety valves of DN100-DN200; one is for safety valves of DN200-DN400. â?¢Various test tools are equipped to meet the needs of customers on different kinds of safety valves.
Surface diameter: 50 mm Link: radial Connecting thread: 1 / 4 npt Accuracy rating: 2.5 Use: stainless steel pressure gauge widely used in petroleum, chemicals, chemical fiber, metallurgy, power plants and other industrial sectors in the decay resistance is higher in the process of measuring the various fluid medium pressure, temperature at 85 íµ following gas liquids pressure applied to strong corrosive stainless steel components for the detection of medium and poor external corrosion environment. Can substitute the general pressure gauges.
DY-2 Butterfly Extensometer Overview The butterfly-type extensometer is a mechanical contact-type displacement meter, and is made for measuring the displacement of materials, so as to obtain the indicators of certain mechanical properties. It has a simple construction and is easy to use, reliable, highly adaptative, economical and durable and recyclable. In addition, the measurement sensitivity may be improved by enlarging the gauge length. The device is light in weight, clear in scale and compact in structure, and dial gauge and dial indicator are optional according to different accuracy requirements. Therefore, it is a necessary and ideal device for material test. Main specifications 1. Maximum size of the test piece clamped: Diameter of column piece: 0-25mm; thickness of tabular piece: 0-25mm. 2. Size range of gauge length 3. Optional scales: Dial gauge: Measurement range: 0-30mm, division value: -.01mm; dial indicator: Measurement range: 0-1mm, division value: 0.001mm 4. Accuracy grade of the dial provided: Grade 1
Surface diameter: 60 mm Case material: sus304 stainless steel Connecting thread: m14x1.5 Accuracy rating: 2.5 Use: used to measure the copper and copper alloy non-corrosive, non-explosive, not crystal, not precipitate the gas or liquid pressure. The biggest feature is in severe shock in the machine or equipment to normal pressure. Measurement apply intense media pressure shock pulse of the place frequently, work long hours in a state of the pressure on the machinery and equipment, general maintenance pressure gauges.
We are specialized manufacturer of different kinds of sight glass ,gauge glass and related gasket in China.our products have been exported to Pakistan, Poland, Croatia, Malaysia, USA, Syria, Vietnam, Netherlands, UK, Bulgaria and so on. And we are keeping the long term cooperation relationship with our clients Our main product: 1) Reflex type Gauge glass 2)Flat type Gauge glass 3)Round type sight glass 4)Glass tube 5)Gasket for Gauge glass & sight glass 1)Gauge glass sizeï¼? 340 x 34(30) x 17mm; 320 x 34(30) x 17mm; 280 x 34(30) x 17mm; 250 x 34(30) x 17mm; 218 x 34(30) x 17mm; 190 x 34(30) x 17mm; 165 x 34(30) x 17mm; 140 x 34(30) x 17mm; 115 x 34(30) x 17mm The other size is optional or according to the requirements of customers. 2)Round sight glass size: Diameter: 30~350mm, thickness:10~30mm The other size is optional or according to the requirements of customers 3)Glass tube size: Outside diameter: from 3mm to 315mm.Wall thickness: from 1.0mm to 10mm.Length: from 5mm to 2200mm. Normal length: 1000mm-1800mm Such as print the words on the products, the size, and so on.
