Sungraf Carbons Graphite Yarn
High purity flexible graphite yarn with high-temperature inorganic carrier. This is the standard style flexible graphite packing.
Construction: Interlock braid (except small sizes)
Working Temperature:
Up to 850°F if fully expose to air;
Up to 1800°F in steam or another mild oxidation medium;
Up to 5400°F in non-oxidizing media
pH: 0-14; Pressure: Up to 3000 psi; Shaft Speed: Up to 4000 FPM
Application: Pumps and valves, in a wide range of temperature, pressure and chemical environment
Sealing Material
Supplier: Charcoal , Graphite , Soft Pastel And Acrylic Colour Artworks
mesh: 200mesh to 32mesh fixed carbon: 85 to 99.5% S: 50ppm to 1500ppm Expension rate: 150 to 400ml/g Oversize: 70 to 80% volitlematter: 14 to 16% PH: 3-5
It is flexible braided packing which is made of an innovative expanded pure graphite yarn. It can be used to seal hot water, high temperature and pressure steam, leat transfer fluid, hydrogen gas, ammonia, organic solvents, hydrocarbons, cryogenic liquids, etc., except fewer strong oxidizer .They can be applied to the equipments and devices in peroleum,electricity generation ,chemical ,pharmaceutical and light industries. Spec:3mm - 50mm
Pure Flexible Graphite Packing is made from expanded graphite yarn braided into through all kinds of technology of braiding . They are almost suitable to all media, such as hot water, steam, acids, alkalis, organic solvents,hydrocarbons, low temperature liquids, etc. The sealing cap ability is more better and safety,it is the most effctive composite parts forsolving problems, Pure Flexible Graphite Packing is very popular. 1.Flexible Graphite Packing can be used in valve and some rotary application, high temperature valve and soot blowers. 2.Flexble Graphite Packing is suitable for all application, seals hot water, high temperature and pressure steam, heat transfer fluid , hydrogen gas, ammonia, Solvents. Hydrocarbons, Cryogenic liquids, etc.
PTFE Graphite Packing The packing is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of heat-resistant lubricant. PTFE Graphite Packing with oil Packing: Packing made of 100% g PTFE yarns, and re-impregnated with a silicone lubricant with density about 1.6g/cm3. Applications For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators. Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings. Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents. It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
It is a braided packing made of PTFE yarn containing graphite particles and anti-corrosive lubricant. It is recommended for shafts for almost all chemicals. Stability and long service lift are achieved by low friction coefficient. It has great tear strength and high thermal conductivity. This self-lubricating packing does not score the shaft and minimizes sleeve replacement cost. It can be used to seal alkalis, solvents, water, steam, acids except strong oxidizing acids(aqua regia, fuming nitric acid, fuming sulfuric acid, etc.) forcentrifugal pumps, autoclaves agitators, mixers, etc. Spec: 3.0mm - 50mm
Supplier: Glass fiber rope, tape, cloth, yarn, ceramic fiber rope, tape, cloth, yarn, blanket, board, PTFE, teflon packing, graphite packing, cotton packing, jute packing
Supplier: Marble, onyx, graphite, zinc ore, ingots, granula, polyester yarn, cotton yarn, graphite electrodes, dates, honey
Buyer: Marble, onyx, graphite, zinc ore, ingots, granula, polyester yarn, cotton yarn, graphite electrodes, dates, honey
