Micronizer ( Micro Pulverizer ) is used in Herbal Extraction Plant, Solvent Extraction Plant and Pharmaceutical Plants, to make powder of different material.
Cenospheres (aluminosilicate microspheres) are hollow aluminosilicate glass ceramic beads ranging in size from 400-500 microns 20-50mkm (most often from 100 to 250 microns), which are formed during high-temperature combustion of pulverized coal. The chemical composition of the main component of the cenospheres is silicon oxide SiO2 (45-60%), aluminium oxide Al2O3 (15-40%), iron oxide Fe2O3 (1.0-10%), calcium oxide CaO (1.5- 4.5%), potassium oxide K2O (2.0-4.5%) and other certain oxides that make up the balance of the content are typically less than 1.0%. Due to the unique set of physical and chemical characteristics of the cenospheres, they are used in the manufacturing of various composite materials. They are used in solving technical issues that require: reduction in the weight material with a low thermal conductivity, high strength, volume efficiency, increased resistance to erosion and aggressive environments.
Chemical formula : SiO2 Colour : Pure form of this mineral is colour less, if impurities present then it is coloured Structure : Sub angular, rhombohedral Hardness on (on Mohâ??s scale) : 7 Specific gravity : 2.65 Bulk density(tapped) gms/cc : 165.5 Melting point : 2912 fahrehneit Boiling point : 4000 fahrehneit Ph balance : 7 Matter solubility in H2O : Insoluble Refractive index : 1.544 Mesh : 250 mesh ( 65 micron) â?? 800 mesh (10 micron) Average particle size(micron) : 3-11.3 Relative density : 130-430 Oil absorbtion ml/ 100 gm : 40 Brightness : 90-98 % USES OF QUARTZ SILICA POWDER In semi conductor industry, Silica powder is used to conduct reaction with hydrofluoric acid for engraving quartz. Reaction of silica with lead oxide or sodium oxide is utilized to produce different grades of glass that includes borosilicate glass. It is used as one of the key ingredients for micro chip in computer. It acts as an additive for processing of plastics and rubber. It is used as a powerful filler for producing construction material like concrete. It is used for improving viscosity of coatings. Useful for enhancing holding capacity of tire on wet surface.
Available Sizes 100Micron, 75 Micron, 63 Micro, and 45 Micron Chemical Analysis : Na2O + K2O 12 % to 14% Fe2O < 0.5 % Details technical will be provided for the grade requested by customer
Multi Minerals Micro Silica is micronized high purity natural crystalline silica. It is inherently bright, white, low in moisture and chemically inert in nature. Due to its hardness, it yields improved durability and burnish resistance. Along with this, our Micronised Silica has excellent anti-foaming properties, sheen control with low resin consumption. Micro Silica Product Range NanoSil 501 (25 Microns | SiO2 97% | Whiteness 93% - 95%) NanoSil 502 (25 Microns | SiO2 95% | Whiteness 90% - 93%) NanoSil 503 (25 Microns | SiO2 95% | Whiteness 85% - 87%) MicroSil 401 (37 Microns | SiO2 99% | Whiteness 93% - 95%) MicroSil 402 (37 Microns | SiO2 98% | Whiteness 90% - 93%) MicroSil 301 (44 Microns | SiO2 99% | Whiteness 93% - 95%) MicroSil 302 (44 Microns | SiO2 98% | Whiteness 89% - 93%) MicroSil 303 (44 Microns | SiO2 96% | Whiteness 85% - 87%) MicroSil 201 (74 Microns | SiO2 99% | Whiteness 93% - 95%) MicroSil 202 (74 Microns | SiO2 98% | Whiteness 89% - 93%) MicroSil 203 (74 Microns | SiO2 96% | Whiteness 85% - 87%) Features: Chemically Inert Controlled Particle Size Naturally Hard Long Self Life
We are leading manufacturer , Exporter, Supplier of Rice Husk Ash. Rice milling generates a by product know as husk . This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice , broken rice and bran .Rest 22 % of the weight of paddy is received as husk . This husk is used as fuel in the rice mills to generate steam for the parboiling process . This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process , is known as rice husk ash ( RHA ). This RHA in turn contains around 85 % - 90 % amorphous silica. So for every 1000 kgs of paddy milled , about 220 kgs ( 22 % ) of husk is produced , and when this husk is burnt in the boilers , about 55 kgs ( 25 % ) of RHA is generated. India is a major rice producing country , and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy , producing energy through direct combustion and / or by gasification . About 20 million tones of RHA is produced annually. This RHA is a great environment threat causing damage to the land and the surrounding area in which it is dumped. Lots of ways are being thought of for disposing them by making commercial use of this RHA. The particle size of the cement is about 35 - 45 microns . There may be formation of void in the concrete mixes , if curing is not done in properly . This reduces the strength and quality of the concrete . Our product ? Silpozz ? which is made out of this RHA is finer than cement having very small particle size of 25 microns , so much so that it fills the interstices in between the cement in the aggregate. That is where the strength and density comes from. And that is why it can reduce the amount of cement in the concrete mix . RHA is a good super-pozzolans . Silpozz can be used in a big way to make special concrete mixes . There is a growing demand for fine amorphous silica in the production of special cement and concrete mixes ,high performance concrete ,high strength, low permeability concrete, for use in bridges, marine environments , nuclear power plants etc. This market is currently filled by silica fume or micro silica , being imported from Norway, China and also from Burma . Due to limited supply of silica fumes in India and the demand being high the price of silica fume has risen to as much as US$ / ton in India. Technical Specifications: SiO2 : Silica 85 % minimum Humidity:2 % maximum Particle size: Powder or Flakes Colour:Grey Black & White Loss on ignition at 800C 4 % maximum
We are looking forward to import micro silica 97% from worldwide suppliers or exporters. Quantity Required : 10,000 Tons Shipping Terms : FOB Kazakhstan Payment Terms : 50 % T/T on order and 50 % T/T against shipping documents Microsilica (silica fume) is a by product from silicon metal or ferro silicon industries,is an amorphous silicon dioxide sio2 which is generated as a gas in submerged electrical arc furnaces during the reduction of very pure quartz. As the molten metal is produced, a silica-based gas is emitted. This gaseous fume, as it rises, cools rapidly and forms extremely minute,amorphous, spherical particles. The microsilica is collected in a bag house, a system for filtering the hot air and gases vented from the furnace. This gas vapor is condensed in bag house collectors as very fine powder of spherical particles that average 0.1 to 0.3 microns in diameter with a surface area of 17 to 30 m2/g. Microsilica can be used in concrete and refractory materials. Microsilica ,when used in concrete, it can improve concretes properties such as compressive strength, bond strength and abrasion resistance, reduces permeability,and therefore helps in protecting reinforcing steel from corrosion. At the same time, microslica can still be used in the procustion of refractory and porcelain, to raise intensity and durability, it also can be used in paint, coating resin rubber and other high molecular as a filler material to improve the material overall performance.
Fly Ash also known as coal ash or Pulverized Flue Ash, is a byproduct of burning coal and comes from the power plant generating electricity from the coal. Fly Ash is a Grey Colored Fine Powder, Rich in Alumina, Iron And silica. It is formed of silt-sized particles and is spherical in shape and its size ranges from 10 to 100 micron. Due to its shape it enhances its workability and fluidity of fresh concreate. It is even finer than lime and Portland cement. When water or lime is added to Fly Ash it forms compound which is similar to Portland Cement. Fly Ash finds its major application in Power Plant Industry followed by Petrochemicals Industry, Steel and Foundry Industry and even in Brick making plants. Jyoti Chemical provided Fly Ash is free from all impurities and pure. It is procured with expertise and has best quality. We are one of the trustworthy supplier of all the grades and types of Fly Ash. Jyoti Chemical provides you with High Grade Fly Ash Powder, Dry Fly Ash and Powdered Fly Ash.
NANOTAL 3000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 1.00 microns and Top Cut D-97 : 5.00 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.
NANOTAL 1000 is a high purity TALC POWDER [Having Average Particle Size D-50 : 2.50 microns and Top Cut D-97 : 9.50 microns ]. Our product portfolio offers a wide range of milling characteristics, including a narrow particle spectrum and efficient PSD curves. A variety of applications ranging from Paper, Paints, Polyester Putties, Plastics, Adhesives, Cosmetics, Ceramics and many more is being catered by NANOTEC INDIA product range. Our products are from the purest reserves with controlled residue resulting in some diversely crafted products with precisely controlled particle size distribution for high tech applications under brand name NANOTAL having good barrier properties, reinforcement property, and scrub property, gloss, non-yellowing property, corrosion and coverage. It provides enhanced reinforcement properties in rubber / elastomer applications. NANOTAL lamellar particles create an impermeable barrier, substantially reducing air and liquid transmissions. It also diminishes plasticizer evaporation, resulting in good thermal and weathering resistance, there by extending service life and imparts excellent barrier properties. NANOTAL is reinforcing filler and a processing aid in rubber applications and is particularly suited to high impermeability applications. NANOTAL has the ability to absorb moisture, absorb oils, absorb odor, serve as a lubricant and produce a feel good effect in human skin. Finely ground talc is also used as the powder base of many cosmetic formulations. The tiny platelets of a talc powder readily adhere to the skin but can be washed off easily. NANOTAL softness allows it to be applied and removed without causing skin abrasion. Naturally occurring hydrophobic, platy structured mineral improves reinforcement & stiffness to the end product. Further being chemically inert powder, helps to improve water resistance, chemical resistance and general weatherability. Talc increase the non-Thixotropic viscosity, betters resistance to cracks, dimensional stability and shrink resistance in epoxy sealant, joint compound & automotive putties. NANOTAL Talc being an inert material is exhibiting enormously less reactivity compared to the other fillers. It is used in agriculture as a barrier against the minute particles and dust further also act as a carrier in the feed premixes and agricultural chemicals like pesticides. An ultrafine series of NANOTAL is recommended for seed coating to form a uniform micro layer over the seed grains to overcome the problem of moisture formation & disallows premature germination.