Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality bauxite, carbon and iron as raw material.
Our product characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion, good corrosion-resistance and so on. Could not burst, no pulverization and crack in using course of refractory.
1. Introduction: Brown fused aluminum oxide, otherwise known as Brown Fused Alumina or BFA, is produced through an electric arc furnace process. Brown fused aluminum oxide is both a hard (Mohs hardness 9) and tough material with high strength, making it an excellent abrasive grain raw material for applications such as blast media, sandpaper, grinding wheels and abrasive discs, rolls, belts and pads. Its thermal properties make it an excellent raw material for refractory applications, as well. Because Brown Fused Aluminum Oxide has a high bulk density and high hardness making it the perfect media for removing rust, mill scale, and surface contamination. The consistent particle size allows for a uniform surface finish and coverage. 2. Deep Processed BFA Calcined BFA: Heating to 1050°C greatly improves the purity, toughness, strength, and wear-resistance of abrasives. Primary application: vitrified grinding wheels. Blue-Fired BFA: While turning grain-color dark blue, firing at 1350°C achieves far greater toughness and strength, much lower iron content, a very low coefficient of thermal expansion, and excellent hydrophilicity, all of which increase grinding performance and accuracy. Primary applications: coated abrasives (paper, cloth and belts) and heavy-duty grinding wheels. Ceramic-Coated BFA: Ceramic coating improves purity and hydrophilicity, reduces dust, and achieves grain surfaces that have greater toughness, strength, and roughness, and that are also more uniform in particle size. Primary applications: coated and bonded abrasives. Ceramic-Coated Blue-Fired BFA: These grains deliver all of the advantages of both Ceramic-Coated and Blue-Fired BFA. Primary application: coated and bonded abrasives, especially for use on hardened steel and other high-carbide materials. 3. Standard Grain Size Abrasive: F12 to F220; P12 to P220; #240 to #1500 Refractory (mm): 0-0.5, 0-1, 1-3, 3-5, 5-8, 0-10, 0-25, 0-30 Refractory (Mesh): -100, -200, -325 4. General Applications Non-Skid Flooring Sanding Abrasion Resistance Slurry Polishing Paint Filler Grinding Cue Tip Chalk Edge Rounding in Tumbling Wear Resistance Wet and Dry Barrel Tumbling 5. Package a) Packed in 1TON big bag b) Packed in 25KGS x 40Bags in 1MT jumbo bag without pallet c) Packed in 25KGS x 40Bags in 1MT jumbo bag with pallet d) Packed 25kg paper bags well packed on the pallet
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging . Technical Data Product Series FOCUS-6500 Series Application Home Decoration Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 22N/cm Tensile Strength 210KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages Smooth and Delicate. Excellent Adaptation. Greene nvironmental protection. Non-toxic tasteless. Good performance in waterproofing and sealing. Best quality with outstanding service life. Applications Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good waterproof/mildew proof /airtight and environmental property.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars
butyl tapes are waterproof and insulated tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Butyl Tapes Are Waterproof And Insulated Tapes Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion and adaptation to irregular surfaces. It exhibits excellent performance in waterproof, sealing and anti-UV to antenna feeder and cable connection box. Main Specification (Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm Main Color - Black Technical Data Product Series FOCUS-6400 Series Application Communication Industry Elongation - 400% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility Â40, no crack on surface within 24h Tensile Strength 175KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. pplications Provide waterproof and sealing protection to communication base station and antenna feeder. Provide waterproof and sealing protection to cable connection box
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Coir rope is a product made from coconut fiber, which is organic and environmentally friendly. Using coir rope in decoration, agriculture ... will contribute to making our living environment cleaner and more environmentally friendly. Wrap the coir rope around the stem to keep the plant warm, not to make the sap affected in cold weather. - Use coir rope suitable for vines. Endurance on 06 months. After use can be applied to the roots to cause soil moisture. - Use coir rope to decorate the web for high artistic efficiency. Coir discs will be bundled and tied up with rope. Each bundle consists of 50-100 pieces (depends on the thickness). The capacity of the container also varies, depends on the diameter of the discs. But 1 20ft container approximately can load 50,000 - 60,000 pieces Brand: 99 GOLD DATA
Supplier: Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products.
Services: Import and export
1. Diameter: 6-8mm * Length: 200m * Loading: - 200 meters 1800 rolls/ Cont 20ft - 200 meters 3600 rolls/Cont 40ft 2. Diameter: 16-18mm * Length: 100-200m * Loading: - 100 meter 900 rolls/ Cont 20ft - 200 meter: 450 rolls/Cont 20ft 3.. Diameter: 30mm * Length: 80m * Loading: - 240 rolls/Cont 20ft (+/-10%) - 480 rolls/ Cont 40ft - 600 rolls/ Cont 40 HC
