Motor speed controller/ ac drive 380v/220v, three phase/ single phase, 50/60hz input, 0-400hz output. 1. Advanced vector control algorithm , combine accurate speed calculation and self learning of the motor parameter. It realize the accuracy control of motor speed and torque under no- speed sensor mode. V/f and svc can be selected . 2. Optimized space voltage vector pwm modulation technology, has over-modulation function, high voltage-utilization, low output harmonic, and it greatly improves the motorí»s stability and switching loss. 3. Good operation characteristic of low frequency, can realize 0.5hz/150% rated torque output which under no-speed sensor mode. 4. LCD and led double display keyboard, display digit and chinese , the user can operate easily.
The fsk639d increases under-voltage alarm, start-up indicator, Overspeed protection/reset/output, dual state(1, 2) closed loop Adjustment function etc. This product is used for 1000kw engine Control. Supply voltage: 12/24 vdc Output current:
Is_customized:yes brand name:woodward model number:8270-1029 place of origin:china (mainland) Unit type:piece package weight:0.500kg (1.10lb.) package size:15cm x 15cm x 6cm (5.91in x 5.91in x 2.36in)
Fuji's servo system can be adapted to several types of motion control, from high-function like synchronization and interpolation to simple-function motion control like Point-to-Point positioning. Meanwhile, the improved auto-tuning function and new option like servo operator make the machine control with high-speed and high-accuracy be achieved more easily.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
BRAND: WEST PID TEMPERATURE CONTROLLER WEST Controller: Model: WEST-6100+,P6100 Model: WEST-4100+,P4100 Model: WEST-8100+,P8100 Features and Benefits: Dual setpoints & optional remote selection Plug-in output modules allow installing just the functions needed in Expanded user-selectable operator modes in User-selectable plug-and-play output cards in Process and loop alarms in Adjustable hysteresis in Optional 10V SSR driver in Improved Windows PC configuration software Improved easy-to-use HMI Jumperless input configuration Auto-hardware recognition Faster communication speeds More security options Backward compatible panel cutout, housing and terminal wiring capability P6100/P6170/P8100/P4100
BRAND : FUJI TEMPERATURE CONTROLLER PXF9 , PXF4, PXF5, PXF4 SOCKET TYPE ALL SERIES AVAILABLE . Precise control: Achieved a processing speed of 50 ms which is 10 times faster than conventional models. Reading accuracy is also improved from �±0.5% to �±0.2%*. *Comparison under 0â??850�°C range, with RTD. See the Data Sheet for details. Easy-to-see display MVA LCD* which offers high contrast and wide viewing angle Process value is displayed in white *Minimal translucent type vertical alignment liquid crystal display Practical options Simple watt-hour metering function: allows you to monitor energy consumption Operating days alarm: tells you the appropriate time for maintenance work Most compact class in industry 36% smaller (than conventional models) and 58-mm depth shallow body helps downsize your facility Universal input You can use any input among RTD, thermocouples, voltage, current, and mV. The set-up for input change is very easy, only requires parameter change. This allows reduction of maintenance parts
Fan controllers Light control / baybus Front i/o adapters Temperature sensors Configurable lcd displays Fan speed controller Manual rpm control Multi fan controller, Fan rpm monitoring and control . Cartons.
Speed control universal motor using SCR and Stroboscope - BRAND - VIJAYANTA, INDIA 1. To study speed control universal motor using SCR and Stroboscope, Model: SPL 524 U ** Speed sensing by (light interrupt method strobobing). ** Open loop/close lop selectable. ** Tacho generation to apply feedback, firing angle control circuit, RPM indication, built-in power supply, mains operated. Including fractional universal motor.
