CNPOW DBC-60 automatic peeling and chamfering machine is mainly used for peeling and chamfering the outer circle of the fix length coupler with outer diameter less than 60 mm.
The machine is drived the servo motor and controlled by PLC and composed of ball screw, linear slide rail and the touch screen display with easily manual and automatic switching and clear vision.
Workpiece from feeding, clamping,peeling chamfering, unloading are all controlled by the PLC program. The advantages of high degree of automation and one person operating multiple machines at the same time have reduced labor costs and improved production efficiency.
DBC-60 automatic peeling and chamfering machine has the characteristics of high precision, high automation, simple and convenient operation, low failure rate, low noise and stable operation.
This machine is widely used in the peeling and chamfering of coupler and automobile Parts Processing.
DJ X3 desktop trinity chamfering machine is an excellent product first developed in China according to the market. It has excellent performance, high-end indexes and high cost performance. The whole machine is compact and reasonable in layout and beautiful in appearance. Its advanced linear motion system, frequency conversion technology and PLC control technology bring high efficiency and high reliability to users. Machine tool spindle head part The standard configuration is three heads: two crosscutting heads and one vertical cutting head. When chamfering horizontally, the upper and lower edges of the workpiece can be simultaneously inverted without turning over. The upper machine head is equipped with a tool setting sensor, which can automatically measure the workpiece plate and has a memory function. Greatly reduce labor intensity, improve chamfering efficiency and realize safe and efficient production. The worktable of this machine is treated with pre-hardened material, and the hardness reaches HRC35 after heat treatment. It has the functions of air flotation and electromagnet, which greatly reduces the labor intensity of workers. Equipped with scrap iron splash guard to prevent scrap iron from splashing. The panel is easy to operate, and it can enter the corresponding working state only by pressing the corresponding operation button, without manual switching. The electrical part consists of 8 motors, including 5 servo motors of Delta brand, 5 drivers, 1 PLC controller and 2 switching power supplies. This machine adopts X-axis all-metal stainless steel guide guard and Y-axis stainless steel armor guard, which can effectively protect the linear motion radiation, and its service life is much longer than that of the traditional organ
The thickness of peeling veneer can adjust from 0.5mm to 3.6 mm The diameter of remaining wood core is less than 30 mm English language PLC is easy to operate Bigger power invert Best Cast steel body 1.The peeling Speed can be changed automatically according the Program setting! 2.Automatic knife cutter peeling angle adjustment,the veneer surface finish is very smooth,increase the quality of the veneer~. 3.CNC knife peeling angle control,the veneer thickness can be changed by touch screen~. 4.The after angle of knife cutter are designed to change with the log diameter~. 5.By using ball screw~ 6.The worktable movement use Precision linear guide rail~! 7.Electric parts use Schneider~! Technical Parameters: Grade Max length of the wood 1400mm 1400mm 1400mm Working speed 45m/min 50m/min 55m/min Max diameter 380mm 380mm 380mm Diameter of left wood 30mm 32mm 32mm Thickness of veneer 0.5-3mm 0.5-3.2mm 0.5-3.6mm Main motor 2X11KW China motor 2X11KWChina motor2X15KW Siemens motor Servo motor power 7KW CTB servo China 7KW Mitsubishi Japan11KW Mitsubishi Japan Body Cast steel body Fine Cast steel body Fine Cast steel body Automatic Hydraulic knife clamping system N/normal mechanical change knife Double roller drive By gear Total power 29KW 29KW 45KW Net weight 4100KGS 4900KGS 5500KGS
Features The feed power adopts the drive center structure, and the power is placed in the middle and transmitted to the ball screw on both sides through the gear structure to rotate, which greatly prolongs the service life of the ball screw. The single and double rollers are driven by helical gears, with stable transmission, good speed rigidity and long service life. The knife angle is adjusted automatically to follow the log diameter, which can rotary peel high-quality veneer with good ability and excellent thickness tolerance. Servo motor automatically adjusts veneer thickness. Hydraulic press knife (pneumatic optional)
Specification: Model Hs-ac/80-1 Hs-ac/80-2 Main drive motor 1hp*4p 3hp*6p Spindle speed The spindle speed could be adjusted by changing belt According to different processing materials Processing pipe diameter +9~80mm +9~80mm Processing bar exterior angle +9~52mm +9~50mm Compressed air 6~8kg/cm¦/60ml/min 6~8kg/cm¦/120ml/min Standard equipment 1.Main engine bed 2.A set of tongs 3.A standard blade head 4.Cutter Special parts 1.Tongs of different size 2.Special blade head 3.Special tool holders and blades Crate
The double-head chamfering machine refers to that both ends of the wire are cut by a chamfering machine and the ring is cut into a bevel, which is equivalent to using the chamfering machine to cut a triangular cone at the specified position of the wire, without cutting, maintaining a connection Then, the material is sent to the forming area to be bent. Then, a little hard cutting at the position of the ring-cutting triangular cone can break, so the end surfaces of both ends form a smooth surface with chamfers. The wire bending machine considers the needs of users, and has developed a variety of compact and practical machines such as single-head chamfering, double-head chamfering, and end-face grinding. It can be used alone or online with a wire bending machine. The spring machine can be installed at the position after the forming device before the wire feeding box of the wire forming machine is installed, which greatly reduces the manual trouble for the user, and is greatly affected by the equipment. Manufacturer's favorite.
Used for milling the two surfaces of the welded pipe and inner and outer edges. Divided into manual and automatic. Automatic milling head chamfering machine USES the PLC computer control, the entire process is on-line automatic continuous loop, with reasonable design, stable operation, reliable operation, simple operation, convenient maintenance, etc.
Pipe Chamfering Machine Pipe Chamfering Machine Model:EF-52AC Chamfering Capacity:16-52mm(Standard); �?�16mm(customized) Air Pressure:6-8Kgf/c�?� Chamfering Motor Power:1.5 Kw Control Method:Pneumatic SLS Single Head Pipe Chamfering Machine also know as pipe beveling machine is a special kind of pipe end smooth machine. It is a kind of semi-automatic machine with manual feeding,automatic chamfering and automatic clamping driven by pneumatic.Chamfering process can be finished at one time in fast speed and accurate chamfering requirement. Clamp device and knife holder are precisely designed for ensure the center line between work-piece and knife holder at the same level. We keep many chamfering machinesin stock for quick shipments. Features A circular tube modifies an interior angle,an external angle and flat plane at one time with fastness and precision. Automatic and manual working mode which are convenient for adjusting the machine,mold and chamfering knife. Material Available: Carbon Steel,Stainless Steel,Copper,Aluminum.. Each process of chamfering work is driven by pneumatic. Clamp device and knife holder are precisely designed for ensure the center line between workpiece and knife holder at the same level. Dual Feed Chamfer system: First speed------Fast forward movement nearly to tube end to save the time. Second speed---Infinitely variable forward adjustable Chamfering speed to get smooth finish. Good mechanical parts ensure machine runs in high stability
Automatic positioning, automatic drilling and automatic tapping. The processing speed is fast and the positioning accuracy is high. Rotary table multi station synchronous processing, high efficiency. It is versatile and suitable for mass production.
Capacity: 0~3mm Speed: 0~11000rpm Voltage: 1ph, 100v~240v; 50/60Hz Table size: 100*70*8mm Non load motor: 670W 6.0A 1. Adopt with BOSCH main engine. 2. Available for chamfering steel, iron, casting iron 3. The operation is convenient, processing the stability.