Garnet Sand

CHEMICAL COMPOSITION Fe2O3: 25-31% Al2O3:17-21% MgO:5-6% SiO2:34-40% CaO:5.0-10.0% MnO:0-1.0% PHYSICAL PROPERTIES Specific Gravity:3.8-4.1g/cm3 Bulk Density:1.8-1.9 g/cm3 Hardness (Mohs):7.5-8.0 Melting point:1300 C Grain shape:Sharp, Angular Chloride content 25ppm Acid solubility(HCL) 1% Conductivity 25 ms/m Toxic substances:None AVAILABLE SIZES 10-20mesh 20-40mesh 30-60mesh 80mesh PACKING 25kgs pvc bags 1mt big bag or 1mt big bag

Pink garnet sand 10-20mesh Chemical Composition SiO2:34-40% Fe2O3:25-31% Al2O3:17-21% MgO:5-6% MnO

Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. The garnet, as it is mined and collected, is crushed to finer grains; all pieces which are larger than 60 mesh (250 micrometers) are normally used for sand blasting.

We KRISHNA ENTERPRISES Are Having Manufactring Facilites of Garnet Abrasives in Rajasthan With Owing to the affluent knowledge, we are capable to provide Garnet Abrasive Sand. Moreover, the presented series of products is properly checked on varied industry standards to make sure the longer life. Garnet sand is a good abrasive and a common replacement for silica sand in sand blasting. Alluvial garnet grains which are rounder are more suitable for such blasting treatments. Mixed with very high pressure water, garnet is used to cut steel and other materials in water jets. For water jet cutting, garnet extracted from hard rock is suitable since it is more angular in form, therefore more efficient in cutting. Garnet Abrasive Sand Available Size: Mesh 20/40 Mesh 20/60 Mesh 30/60 Mesh 80 Mesh 10/20 And Many more Sizes Garnet Abrasive Sand is a group of iron aluminum silicate homogeneous minerals having similar properties. Non-hygroscopic, sharp angular shape, inert, slightly magnetic, not soluble in water, translucent, friable to tough, and contains no free chemicals. All oxides and dioxides are combined chemically as follows: Fe2O3Al2(SiO4)3. The iron and aluminum are partially replaceable by calcium, magnesium and manganese. Specifications : Fracture Usually Brittle Color Red to Pink Bulk Density (lbs./ft3) 150 Melting Point (C) 1250 to 1315 Fusion Point (high Fe) (�°C) 1200 Strength Friable to Tough Mineral Conductivity (volts) 18,000 Mohs Hardness @20C ~ 8 to 9 Category Neosilicates Sand Blasting Grade : 20/40, 20/60 and 30/60 Fine grains of Abrasive garnet is recommended for blast cleaning applications. Industrial Mineral is a natural Almandine known for its natural hardness, resilience and lends itself to high performance during blasting. Its intrinsic physical and chemical uniformity ensures superior performance. Garnet is steadily superseding other blasting media because it is environment friendly and reusable

Water Jet Cutting

Garnet Sand Abrasive from India . We are one of the largest manufacturer and exporter of Garnet sand from India, We can supply all the grades from Mundra and Vizag port.

Garnet Sand Abrasive from India . We are one of the largest manufacturer and exporter of Garnet sand from India, We can supply all the grades from Mundra and Vizag port.

Garnet Sand - Mesh 12-24,20-40,30-60, 80 and 120

Material: Abrasive Garnet Sand Size: 0.25 - 2.5 MM Color: Reddish Specific Gravity: 4.0 - 4.1 Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Sandblasting with Abrasive Garnet Sand - During the surface preparation process, Abrasive garnet is blasted onto the surface of the steel using high-pressure compressed air. It can be found in high-quality coated and bonded abrasives such as abrasive papers, clothing, and wheels. Abrasive garnet sand is a mineral-free, iron-free substance with a wide range of applications. High-pressure water jet cutting is its primary application as abrasive sand. Garnet sand is a good abrasive and a common sandblasting replacement for silica sand. Rounder Garnet Sand is better suited for such blasting treatments.