Series CTS/CTN/CTB Permanent-Magnetic Roller Separators | Series Electromagnetic Separators
Product Description
instruction
They are used in mines and coal separating factories to separate the wet fine magnetic materials or remove the magnetic materials from the non-magnetic materials.The separators have three types of tanks:half countercurrent tank(CTS) and countercurrent tank(CTN), which are used according to different granular and technological requirements.
Magnetic Drum Separator for Mineral Ore CTS/CTN/CTB Series:
Series CTS/CTN/CTB Permanent-Magnetic Roller Separators | Series Electromagnetic Separators Product Description instruction They are used in mines and coal separating factories to separate the wet fine magnetic materials or remove the magnetic materials from the non-magnetic materials.The separators have three types of tanks:half countercurrent tank(CTS) and countercurrent tank(CTN), which are used according to different granular and technological requirements. Magnetic Drum Separator for Mineral Ore CTS/CTN/CTB Series: ---Suitable for iron ore, fly ash of iron power plant separator with large capacity, high recovery rate, especially for iron ore concentrate select. ---The downstream tank (Series of CTS) is applicable to rougher flotation and concentration of ore with size: 6-0 mm. ---The half upstream tank (Series of CTS) is applicable to rougher flotation and concentration of ore with size: O~0.5mm, the granularity of granule is 0.15-0.8mm. Working principle of Iron Ore Equipment: When the raw materials flow into the tank body of the wet drum magnetic separator, firstly, the flowing direction of the raw materials is the same as the rotary direction of the magnetic drum, the iron magnetite materials are attracted to the surface of drum. This is the first separation. In the second step, the flushing water below flush the raw materials back for the second separation. This time the flowing direction of the raw materials is opposite to the rotary direction of the magnetic drum. Then along with the rotation of drum, the iron magnetite materials on the surface of drum will finally leave the magnetic field and fall to the ore concentrate box under gravity. Also, the flushing water above helps to flush the iron magnetite into the ore concentrate box. The weak magnetic and non-magnetic materials can not be attracted and will flow to the discharge pipe for tailings. Magnetic Separator CTB Series Feature:
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
Supplier: Sugar, urea and rock phosphate, Ductile iron pipes and fittings, carbon steel pipes and fittings, surge arresters and composite insulators (11 223 kv), heavy machinery attachments for excavators and skid loaders, fuel oil, pet coke and iron pellets, aerosol fire suppression devices
Services: Consultancy services, business set up, facilitating, brokerage, contracting for electromechanical work in abu dhabi
Buyer: Lithium carbonate
Magnetic Writing and Drawing Board Material: ABS+ Magnet
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Door Magnetic Catcher
Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating amp Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range amp Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
Product description [ctdg dry drum magnetic separator] Brief Ctdg dry drum magnetic separator is a new type high-efficiency magnetic preseparation equipment for materials with big size, such as lump iron ore, mill sales and other ferrous metals... Feature Str Export packing , or as per customer's request
Wet Permanent Drum Magnetic Separators Are Used In Dense Media Separation (dms) Plants For The Recovery Of Magnetic Particles From The Dilute Medium. They Must Recover The Maximum Amount Of Magnetic Particles At The Highest Possible Density. A Wet Drum Separator Consists Of A Stationary Magnet Arc Around Which A Drum Rotates. The Drum Is Partially Submerged In A Tank Which Follows The Contour Of The Drum. Qj-ct(s/n/b)wet Permanent Drum Magnetic Separator Is A Wet-type Low-intensity Magnetic Separator With Relatively High Magnetic Field And The Most Efficient Magnetic Separation Equipment With Strong Magnetism For Minerals. Qj-ct(s/n/b) Wet Drum Magnetic Separator Is Ideally Used To Separate Ferrous Particles From Non-ferrous Particles. This Kind Of Magnetic Separators Are Made By Us To Provide Ultimate Protection To Crushers, Grinders, Pulverizers And Allied Equipment And Is Useful For Mining And Ore Dressing Industry, And Can Be Equipped With Semi-conflow(ctb), Con-flow(ctn) And Co-flow(cts) Tanks According To Customers' Requirements. Its Magnetic Induction Intensity Can Be Designed In Accordance With Specific Mineral Properties And Operation Processes. Characterized By Advanced Structure, Light Weight, Reliable Operation, Easy Maintain, Serialized Products And Standardized Parts, The Wet Magnetic Drum Separator Can Meet The Needs Of Plants Indifferentsize. Qj-ct(s/n/b) Applications: (1) For Primary Rough Dressing And Refused Tails, Increasing Recovery Rate And Reducing The Load Of Second-stage Grinding. (2) For Concentration Of Ferromagnetic Minerals, Increasing Ore Grade And Recovery Rate. (3) Used Before High-magnetism Separation To Remove Ferromagnetic Minerals From The Ore And Prevent Magnetic Clogging. (4) For Recovery Of Heavy Media At Coal Processing Plant We Can Design As Your Require
