Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency.
1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.
2.European design, multi group gears driving and be suitable for heavy cutting and stable precision.
3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available.
ModelZG-375SA
Sawing angle90°45°
Cutting capacitymm
120100
120Ã?120105Ã?105
150Ã?60110Ã?60
7060
65Ã?6555Ã?55
Machine motor3HP
Spindle speed58/29R.P.M
Cooling water pump1/8HP
Saw bladeHSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32Pin hole2Ã?Ï?11Ã?63mm
The use of hydraulic pressure25-35kg/cm²
Machine dimensionApproximately 620kgs
NW/GWLÃ?WÃ?H1610Ã?780Ã?2130mm
Supplier: Metal products, all types of metals steel pipe seamless and welded, galvanized steel coil, steel sheet PPGI, stainless sheet, aluminum coil, ingots scrap angel bar, H steel beam, and deformed steel bar are widely applied to auto industry, household appliances, construction industry, and highway guardrail construction
Services: Trading, recycling
Buyer: Metal products, recycling machine, waste materials, agricultural products
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile. 1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency. 2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy 3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time 4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure) 5. press height and speed and saw cutting height and speed can be set according to material size and thickness. 6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life 7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate. Model ZG-610SA Sawing angle +45° ~ 0°~ -45° Blade size 24"x1" Inner hole Saw blade 2000R.P.M. Machine motor 7.5 HP Pressure required 4-6kg/cm² Size of Table 1130x800mm Table height 1030mm NW/GW 790 / 870kgs Machine dimension ( LxWxH ) 1330x1200x2000mm Packing dimension ( LxWxH ) 1450x1320x2180mm
Industry Paperboard crush cutting machine The paper board crush cutting machine is used for the end customers of corrugated box (color box), and it is used as the filling or cushioning material in the packaging in the manufacturing industry; Such as precision instruments, meters, electrical appliances, ceramics, glass, crafts, furniture and other industries. It can deal with irregular waste cardboard, unqualified cartons, color cartons and cartons, with or without printing, and can solve the thorny problems of enterprise managers. Paper products, recycling, no pollution sources; The state explicitly forbids "non degradable products" as filling materials, which can be used as substitutes for some chemical products. Paperboard expanding and cutting machine features : Green environmental protection. 2. Reduce cost. 3. Waste utilization. 4. Wide use. Paperboard expanding and cutting machine advanced technology : The paper board expanding and cutting machine uses German technology to provide you with high quality green packing and filling materials; The unique technology turns the corrugated boxes that need to be discarded into "free" soft and fluffy green packing filling materials, and is used in the transportation packaging of fragile goods; The main switch is also an emergency brake to ensure safety; This product is widely used in packaging industry, transportation industry and parts processing industry. For example, motor manufacturers use fluffy paperboard as filler to facilitate logistics transportation; Small space and easy operation; A variety of specifications to choose from, with super large production capacity. Welcome order! good price good quality !
Paperboard expanding and cutting machine, The paper board expanding and cutting machine is used for the end customers of corrugated box (color box), and it is used as the filling or cushioning material in the packaging in the manufacturing industry; Such as precision instruments, meters, electrical appliances, ceramics, glass, crafts, furniture and other industries. It can deal with irregular waste cardboard, unqualified cartons, color cartons and cartons, with or without printing, and can solve the thorny problems of enterprise managers. Paper products, recycling, no pollution sources; The state explicitly forbids "non degradable products" as filling materials, which can be used as substitutes for some chemical products. Paperboard expanding and cutting machine features : Green environmental protection. 2. Reduce cost. 3. Waste utilization. 4. Wide use. Paperboard expanding and cutting machine advanced technology : The paper board expanding and cutting machine uses German technology to provide you with high quality green packing and filling materials; The unique technology turns the corrugated boxes that need to be discarded into "free" soft and fluffy green packing filling materials, and is used in the transportation packaging of fragile goods; The main switch is also an emergency brake to ensure safety; This product is widely used in packaging industry, transportation industry and parts processing industry. For example, motor manufacturers use fluffy paperboard as filler to facilitate logistics transportation; Small space and easy operation; A variety of specifications to choose from, with super large production capacity. Welcome order! good price good quality !
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
Supplier: Metals and minerals, steel products and agricultural products
1 steel tubes/pipes (ssaw, lsaw, erw and seamless steel pipes)
2] galvanized steel coils
3] galvanized steel sheets
4] pre painted galvanized steel sheets/coils
5] corrugated steel sheets
6] deformed steel bars / re inforcing steel bars
7] wire rods
8] wire nails
9] stainless steel coils
10] steel fence bar
11] steel strips
12] flat / round / square bars
13] pipes / fittings / flange
14} steel billets
15 agro products rices, pulses, sesame seeds, peanuts
Services: Traders
Buyer: Graphite, aluminium, quartz, steel, copper, zinc, pulses, rice, nuts and seeds
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile. 1. NC controller and touch screen are used for easy operation and fault detection. 2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing. 3. Automatic feeding stroke of 1400mm can feed the material to the overpass. 4. Saw blade horizontal saw cutting, suitable for wide and large material processing. 5. High precision ball screw driven by servo motor. 6. Oil production pressure push in the feeding mode, high sawing stability. 7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time. 8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved. 9. The processing machine will automatically have no material induction or can choose to set the length of the tail material. Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding. Model ZG-610FAL/NC Cutting ability WxH WxH 200x200,210x175,350x130,500x65 Servo drive system Ball screw The longest feeding trip 1400mm Automatic feeding accuracy ±0.1 mm Saw blade 2000 r.p.m. Machine motor 10HP( optional 15 HP) Servomotor horsepower 1 KW Hydraulic pump motor 3 HP The touch screen 7 " Blade size 14"~24" (1" The aperture ) Operating air pressure 6 kg/cm² Machine dimension 3500 x 2100 x 1860 mm Machine weight 2300 kgs
