Horizontal Open Well Pumps

APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture and Sprinkler Irrigation STRUCTURAL CHARACTERISTICS Pump Casting : Grey Iron Casting Impeller Ci/gun Metal Shaft/motor Body Ss 410/ss 302 Thrust Bearing : Bronze/stainless Steel/carbon MAXIMUM OPERATING CONDITIONS Pumping Medium : Clean Water Free From Solids, Chemically And Mechanically Non- Aggressive LIQUID TEMPERATURE :

Applications : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture And Sprinkler Irrigation Structural Characteristics Pump Casting : Grey Iron Casting Impeller : Ci / Gun Metal Shaft/motor Body : Ss 410/ss 302 Thrust Bearing : Bronze/stainless Steel/carbon MAXIMUM OPERATING CONDITIONS Pumping Medium " Clean Water Free From Solids, Chemically And Mechanically Non- Aggresive Liquid Temperature :

APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, Agriculture and Sprinkler Irrigation Structural Characteristics Pump Casting : Grey Iron Casting Impeller : Ci/gun Metal Shaft/motor Body : Ss 410/ss 302 Thrust Bearing : Bronze/stainless Steel/carbon Maximum Operating Conditions Pumping Medium : Clean Water Free From Solids, Chemically And Mechanically Non- Aggresive Liquid Temperature :

Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour SHAFT : Stainless Steel 420 H&T TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate SEAL : Nitrile Rubber Oil Seal IMPELLER / ROTOR : Dynamically balanced WINDDING WIRE: Poly wrape Double coated copper wire

Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal BUSH BEARING : GM LTB 4 SEAL : Nitrile Rubber Oil Seal ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Dynamically balanced WINDDING WIRE : Poly Wrap Double coated copper wire HP 0.5 HP to 2.0 HP HEAD 7.5 Mtrs to 32.5 Mtrs CAPACITY :40 LPM to 480 LPM VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 11 Nos. HP 1.0 HP to 30 HP HEAD 5 Mtrs to 75 Mtrs CAPACITY 40 LPM to 5200 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 166 Nos.

Salient Features Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor It also works on Low Voltage Easy installation and easy Servicing MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire HP 0.5 HP to 2.0 HP HEAD 6 Mtrs to 28 Mtrs CAPACITY 25: 550 LPM VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 24 Nos. HP 0.5 HP to 25 HP HEAD 6 Mtrs to 86 Mtrs CAPACITY 25: 2100 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 53 Nos.

Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING : G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 20.0 HP to 120 HP THREE PHASE 300- 415V HEAD 10 Mtrs to 150 Mtrs CAPACITY 1000 LPM to 4000 LPM VOLTAGE - AC 300- 415 V, 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.

Salient Features Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance MOTOR BODY : Stainless Steel with 1% Nickel STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate BUSH BEARING: G.M. LTB 4 ROTOR SHAFT : Stainless Steel 420 H&T SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wire PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamicaly balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 10.0 HP to 80 HP THREE PHASE 300- 415V HEAD 15 Mtrs to 280 Mtrs CAPACITY 300 LPM to 2400 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBER OF MODEL More than 800 nos.

Salient Features : Multi stage centrifugal pump with Radial & mixflow impeller It Operate Submerged Beneath The Surface Of Water Prime mover motors are wet type, water lubricated Easy installation and easy servicing It also works on low voltage Energy efficient design Good quality components and parts require less maintenance Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost MOTOR BODY : Stainless Steel with 1% Nicke STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hou THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plat BUSH BEARING : GM LTB ROTOR SHAFT : Stainless Steel 420 H& SEAL : Nitrile Rubber Oil Seal WINDING : Poly Wrape Double Coated Copper Wi PUMP BOWL : Graded cast Iron PUMP SHAFT : Stainless Steel 410 IMPELLER : Stainless steel casted dynamically balanced PUMP SLEEVE : Stainless steel with hard chrome plating HP 2.0 HP to 30 HP THREE PHASE 300- 415V HEAD 4 Mtrs to 228 Mtrs CAPACITY 350 LPM to 2150 LPM VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM NUMBERS OF MODEL More than 800 Nos.