High quality ss mixing tanks are made with tested stainless steel .materials for any kind of liquid mixing application different types of exibitors and mixing plates are used as per the requirement.
High quality ss mixing tanks are made with tested stainless steel .materials for any kind of liquid mixing application different types of exibitors and mixing plates are used as per the requirement.
High quality ss mixing tanks are made with tested stainless steel .materials for any kind of liquid mixing application different types of exibitors and mixing plates are used as per the requirement.
High quality ss mixing tanks are made with tested stainless steel .materials for any kind of liquid mixing application different types of exibitors and mixing plates are used as per the requirement.
High quality ss mixing tanks are made with tested stainless steel .materials for any kind of liquid mixing application different types of exibitors and mixing plates are used as per the requirement.
SS Industrial Storage Tanks Storage and processing tanks find its applications in vast area of industries. We offer wide range of storage and processing tanks according to our customer’s needs. We choose fine quality Stainless Steel for fabricating food processing tanks. Our ultimate aim is to meet customer’s requirements and to earn customer’s satisfaction. Different sizes and shapes of tanks such as cylindrical, Conical and spherical can also be manufactured. No Tanks leaves the factory before stringent pressure checks and proper welding is also ensured before delivery.
SS Pasteurization Tanks: Acclaimed for efficient working, our SS Pasteurization Tank is quite popular among the customers. Stainless Steel Crab Pasteurization Tank is manufactured under strict inspection using stainless steel making it reliable. As per the requirement of customers, it is available in different sizes and customizations. It is well suited for heating the products to an intended temperature level and then swiftly cooling it down.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Application It is applied to liquid preparation and various water treatment process in purgative area, such as infusion solution, injection solution, eye drop, oral liquid and blood preparation. Description: Specification: 30L~50000L Material: SS316L or SS304 Surface finish: inside surface is Ra0.28~0.6¦Ìm by mechanical polish. (passivation or electropolish are optional). Outside surface is Ra0.6~0.8¦Ìm by satin finish. Agitator: Top mechanical agitator (propeller, spiral and anchor or others) Pressure: ATM or pressure vessel (-0.1~1Mpa) Structure: Single layer vessel, vessel with jacket, vessel with jacket and insulation Jacket type: dimple jacket, full jacket, or coil jacket Insulation material: rock wool Components: vent filter, temperature gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to clients detail requirement. Manufacture standard for pressure vessel: GB150-1998, ASME or PED/23/EC.
High quality ss storage tanks are made with tested stainless steel .materials for any kind of liquid storing application different types of exibitors and storing plates are used as per the requirement.
