***AHU(Air Handling Unit) Spec***
1. Horizontal Type : Air Volume 3,000---84,000m3/h
2. Vertical Type : Air Volume 3,000---18,000m3/h
3. Ceiling Type : Air Volume 3,000---12,000m3/h
8 different models which provide required humidity and temperature by conditioning air volume in wide ranges.
Standard series
Application area: business centers, schools, hospitals, factories, hotels and restaurants.
8 different models which provide required humidity and temperature by conditioning air volume in the range of 3000m¦/h and 100.000 m¦/h.
The framework which is formed by combination of aluminum frames, which are connected specially, with plastic and aluminum comers.
Boards which are made up of double skilled galvanized iron in a standard way.
Polyurethane insulated panels, which are 30 mm in thickness, for thermal and acoustic insulation in a standard way.
Standard accessories;
Filter chambers; chamber design which provides easy mounting and de-mounting in filters and filters with different productivity levels on demand.
Heating and cooling coils; seamless cooper tubes. In heating coils, 4 options: warm water, vapor, hot water, electrically heated; in cooling coils, 2 options: chilled water and dx (direct expansion).
Dampers; rigid aluminum frame in multi airfoil structure which is the least resistant against airflow. Rubber gaskets which reduce air leakage through blades to the minimum level.
Fans; statically and dynamically balanced aspirators and ventilators in double inlet belt driven centrifugal type. Forward curved fans in systems with low, medium and high duct pressures, .
Optional accessories;
Gonka vapor humidifier, standard vapor cylinder, immersion electrodes, stainless vapor distributor and microprocessor control unit.
Mufflers which are made up of coulisses to provide required sound holding capacity.
Plate heat exchanger or heat recovery wheel for recovery of the heat emitted with exhaust air.
Electrical board.
Frequency converter
Blowtech Engineers delivers high quality Industrial Air Handling Unit (AHU\'s), that are reliable, engineered to the highest standards and affordable. Our range of Air Handling Units are designed to create a symbiosis of heat, ventilation and air filtration. The result is a perfectly balanced environment for people and industry.
*Features:
- Maintenance free
- Precisely engineered
- Long working life
- CHW coils
- Weatherproof & Removable Panels
- BLOWTECH Air Handling Unit Available IN rated - Exe, Exd, ExnA, Extd & ATEX for Hazardous location
- High Static fan for high efficiency filters
Single Skin Air Handling Units and Double Skin Air Handling Units - for all Air-conditioning applications, Our products construction heaving rigid framework for the unit comprises an assembly of externally chamfered extruded anodized aluminum profiles and nylon glass fiber corner joints, and incorporated with polyurethane foam, 25 mm / 43 mm / 50mm thick pressure injected sandwiched panels, also we makes the entire unit anti-corrosive and sweat free (thermal break). and imported self-drilling and self-tapping galvanized sheet metal screws adds to the aesthetic & more times stronger of the framework.
Single Skin Air Handling Unit, Double Skin Air Handling Unit, Floor Mounted Air Handling Unit, Ceiling Mounted Air Handling Unit, Fan Coil Air Handling Unit, Fresh Air Handling Unit, Air Washer System, Heating & Cooling coil), Hepa Filter, HEPA Housing Box, HVAC Air Filter, Return Air Riser, Duct Ahu Heater - Finned Strip Heaters (HVAC), Linear Grill - Linear Bar Grill, Perforated Grill (SS 304/ Aluminum / CRCA Powder Coated), Diffuser, HVAC Air Ducting & Insulation Works, Duct Dampers (Aluminum / Galvanized), Fire Dampers, VRF/VRV Air Conditioning System, Industrial & Commercial Air Conditioning, Chilling Plant System
In all TI UNIT air handling units the frames are from aluminum profiles while the chassis and body panels are made from galvanized steel sheets in appropriate thicknesses.
All units are completely painted in the proper thickness.
Blower(S):
Double width-double inlet centrifugal fans with forward curved blades are normally used for low pressure drop requirements as opposed to fans with backward curved blades which are for high pressure drop applications. Fans and housings are made of galvanized steel each set off a plus other related components such as shafts are statically and dynamically balanced, shafts are selected from proper material and size. Other power transmission components such as pulleys and belts are also suit ably chosen depending on the required fan speed and electric motor power.
Fan(s) and the corresponding electric motor(s) are installed on an independent chassis which is itself installed on the main chassis using vibration dampers in order to eliminate transfer of vibrations to the structure. To further reduce the effects of vibrations, fan outlet (s) are also connected to the structure via flexible material such as canvous.
All 380V/3/50Hz electric motors are selected with insulation class of (f) and ingress protection of (IP- 54). Electric motors with ingress protection of (IP- 55) are also available upon request.
Coil (S):
Cooling and heating coils or either one of the two depending on the Requirement May be installed. Cooling coils are available in two, types of chilled water and direct expansion (D.X.) as per clients requirements. The chilled water coils are constructed of 5/8 O.D copper tubes plate finned (8, 10, 12 or 14 FPI) in aluminum or copper upon request.
The D.X. Coils are constructed of 3/8 OD copper tubes also plate finned (10, 12 or 14 FPI) in aluminum or copper as required. The chilled water for cooling coils in to be supplied by a water chiller and in the D.X. coils cooling is provided through the use of refrigerant such as R-22, R-407c or R-134a. Chilled water coils may be requested in 4 or 6 rows and as to the D.X. coils, they are available in 4 or 6 row configurations. Heating coils are available in two types of hot water and steam. The hot water coil similar to chilled water coil is offered in 1 or 2 row configurations. Steam heating coils are constructed of 1/2 seamless steel pipe spiral finned in aluminum or copper. Coils in 1 & 2 -row configurations are available upon request.
Mixing box:
Fresh and return air streams are mixed in the mixing box .An independent air damper is included for each air stream. Air Dampers are manufactured from aluminum in opposed blade configuration and are air sealed through the use of rubber strip gasket. Damper actuators ma y be easily installed when required. Washable aluminum filter modules 2 inches in thickness are arranged in (V) type configuration inside these boxes. Housing for
Whitenair Technologies is a Leading Manufacturer of HVAC ( Heating Ventilation& Air Conditioning) system ,We create and Implement innovative and technologically advanced solution for all types of Industrial facilities and commercial institutions.
Our Air Handling units guarantee comfort regardless of a facilitys location. We are real experts in Good Climate��.. and Good IAQ ( Indoor air quality)
Whitenair Air Handling Units are designed with the use of state of the art technologies, advanced material engineering ,and completely innovative construction solutions hence whitenair AHUs are reliable, Energy saving and fully adjusted to the expectation of market .
We care for quality on all stages of work with the product starting from AHU design through production to service assistance. We make sure that our AH are always assembled by highly qualified services. Assembly is included as standard and we are responsible for performing services of highest quality possible
