We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Edm wire
High accuracy, free of impurities, improving discharge performace, surface quality, easy to thread, improving cutting speed, clean running, outstanding quality, value priced.
The specification of the wires are :0.10mm, 0.15mm, 0.20mm, 0.25mm.
Material:pure molybdenum 99.95%Min
Density: 9.3
Melting point: 2610
We can manufacture according to customer required
Feature
Molybdenum have high melting doing, high strength and good conductivity, thermal expansion coefficient of small, good corrosion resistant. In the defense industry, the electronics industry, aerospace and machinery industries-source are so widely used
Application
1.Molybdenum wire is mainly used for auto parts spraying
2.Molybdenum wire for wire-cutting application is characteristic in high tensile strength, good electric discharge, smooth finish, high cutting speed, long life and etc.
3.It is also used as electric light source parts, high temperature and heating elements, etc.
This steel has a high carbon content and is of good grade. It is built into the construction of the tyre to endure bumps, heat, and other potentially dangerous situations. As a result, recycled tyre wire is of very high quality and meets industry standards. To prevent machines farther down the processing line from usury, contemporary technologies tend to remove the wire as soon as possible. Pre-shredding is commonly followed by a first granulation step, in which the rubber chips are filtered through a 15 to 25 mm screener, depending on the plant layout. A magnetic mechanism separates the steel wire from the rubber immediately after this granulation. Along with the wires, 10 to 35 percent by weight of rubber and textiles are removed, hence the total material recovery varies depending on the contamination grade of the material (rubber/fiber). Steel typically makes up 10% to 20% of the weight of an old passenger car tyre. A typical shredding factory generates huge quantities of steel tyre wire, with quality varying depending on the technology, storage, and management systems used by the factories.
Another important component in assessing the material's quality is the steel's resistance to atmospheric agents. The material is quickly oxidised since it is shaped in tiny wires. As a result, protecting the wire from any atmospheric contaminants is an important part of improving its quality.
Density:10.2g/cm3
Mo content: 99.95%
Dia: 0.5, 0.8, 1.0, 1.5, 2.0mm, etc
Type: Black wire, white wire, spray moly wire, heating molybdenum wire
Used in making heat parts for electronic vacuum device, heating parts, hooks of various type of bulb, mandrels of tungsten coiled coil wire, high-temperature field of molybdenum furnace etc.
Application Nickel plating is used in various alloys such as new silver, Chinese silver, German silver; for coins, electronic boards, storage batteries; magnets, lightning rod tips, electrical contacts and electrodes, spark plugs, mechanical parts; catalysts for the hydrogenation of oils and other organic substances. See also Raney nickel. Manufacture of monel metal, stainless steel, heat-resistant steel, heat-resistant and corrosion-resistant alloys, nickel-chromium resistance wire; alloys for electronic and space applications. Use Nickel is used in various alloys such as German silver, monel and nickel-chromium alloys; for coins; coins, metals, etc. In storage batteries; in spark plugs; and as a hydrogenation catalyst. Preparation Nickel is obtained by processing sulfide and laterite ore concentrates using pyrometallurgical and hydrometallurgical processes. The nickel matte powder obtained by roasting and smelting is further cleaned by electrometallurgical, steam and hydrometallurgical refining methods. A portion of the matte surface is baked to obtain commercially available nickel oxide agglomerates. 99.9% pure nickel can be obtained by electrolytic refining process. The purest nickel (99.97%) is obtained by vapor metallurgy. In this process, also known as the Mond Chemicalbook process, a mixture of nickel and copper sulfide is converted into oxides and then reduced by heating with water vapor at 350â??400 �° C. The resulting active form of nickel is treated with carbon monoxide to obtain volatile nickel carbonyl [Ni (CO) 4]. The reaction of the latter is reversible. Heating produces pure nickel and carbon monoxide. Overview Nickel is a slightly yellowish silvery-white metal, hard, easy to polish, magnetic (not as good as iron and cobalt) and good plasticity. Density 8.902g/cm3, melting point 1453 �° C, boiling point 2732 �° C. The chemical properties are relatively active. It has good corrosion resistance, is difficult to oxidize in air at room temperature, is not easy to react with concentrated nitric acid, and can resist alkali corrosion. Fine nickel wire is flammable, reacts with halogens when heated, and slowly dissolves in dilute acid. It can absorb a considerable amount of hydrogen. It is mainly used to make various alloys composed of iron, copper, zinc and other metals, and is widely used in cutting-edge technology, high-temperature ceramic products, corrosion-resistant alloys, chemical equipment, electronic and electrical equipment, special utensils, glass and other industries. Adding nickel to steel can improve the toughness and corrosion resistance of steel, such as nickel steel, chrome-nickel steel, etc.
