CemMate 100
Grinding type cement grinding aid
Description
CemMate 100 is a kind of grinding type cement grinding aid.
By the use of CemMate 100, without the new investment and change of existing cement grinding process equipment, it can be realized that:
- Mill output is increased;
- Energy cost is reduced.
Scope of the application
Suitable for grinding of any kinds of cement, slag powder, steel slag powder and limestone powder.
Property
Appearance
Brown liquid
Specific gravity
1.16±0.05
PH value
9±1
Insoluble matter
â?¤ 0.01%
CemMate 100 is non-toxic, non corrosive, non flammable, non explosive.
Technical characteristic
- Increasing mill output. This product can effectively remove the electrostatic agglomeration due to grinding, reduce the agglomeration between cement particles, and the agglomeration between particles and pound mills. The mill output can be increased by 10ï½?20%. For the grinding of slag powder or steel slag powder, the mill output can be increased by ï½?10%.
- Reducing energy consumption. The electricity used in the production of per ton of cement can be saved by 6ï½?10 kw/h.
- Others. There is no corrosive effect on grinding equipment and concrete reinforcement. Basically, it does not affect cement setting time and water consumption of standard consistency. Cement strength can be increased slightly. It has no adverse effect on the work performance, mechanical properties, deformation performance and durability of concrete.
Dosage
The dosage of CemMate 100 is related to the physical properties of materials to be grinded.
The recommended dosage is 300 grams / tons of materials to be grinded (0.03% of cement weight).
Usage method
In order to achieve the most stable using effect, CemMate 100 shall be accurately added by an adjustable liquid metering pump that matches the type and output of the mill. The liquid metering pump must be calibrated before use.
CemMate 100 can be added to the belt conveyor or the front of the mill.
Technical service
Professional engineers can combine the details of the cement plant to make experiment and recommend the mill parameters to the cement plant.
CemMate 100 is one kind of cement grinding aid. According to the condition and demand of cement plant, professional engineers can design the most suitable cement grinding aid for many kinds of cement from cement plants to adjust cement performance, such as: setting time, water requirement of normal consistency, fluidity, adaptability of cement concrete, etc.
Package
200 L/drum, intermediate bulk container.
Storage
CemMate 100 should be stored indoors or in the shade. Avoid freezing. If it is frozen, melt it slowly before use. After long term placement, it should be stirred or shaken before use. The validity period is one year.
We provide free sample for mini mill test and technical support throughout the whole application process.
We look forward to the cooperation with the agent worldwide.
Diamond CBN Wheels
Construction: Cast Iron, M S Body Power: 100 HP Capacity: 1000 to 1500 Kg/hr.
How the grinder works: The material is placed in the feed hopper leading to the grinder head where the rollers and dies are located. The material should not exceed to of the height of the rollers. The material will be forced through the die by the rollers to generate heat and produce pellets. The pellets will leave the granulator port through the discharge port and will fall by gravity into your container. With the correct heat, moisture recipe, and force (pressure), you should make perfect pellets. Note: All new pelletizer dies must be adjusted before first use. Note: The raw material should not be larger than the die hole size. If your material is larger than the die hole size, the material needs to pass through the hammer mill first. Future Fortune's pellet grinder machine comes with a standard 6 mm die. Other die sizes range from 3 mm to 8 mm, depending on the model. Other chip sizes up to 12 mm are available on request and can be special ordered. All additional dies are shipped free of charge with the purchase of the pellet grinder. The more you can click here.
RBM-II type metal grinding Machine is a kind of sample preparation equipment for metal sample, which is carefully developed by RUISHENBAO® analytical (shanghai) Co., Ltd. The metal grinding machine has a wide range of applications, and can be equipped with various accessories ï¼?suitable for different customer needs. The field of application involves pre-processing of steel analysis, medical device analysis, and aluminum analysis. It is characterized by grinding the end faces of metal materials with different regular shapes, and the quality of the end faces of the sample reaches the requirements of Optical Emission Spectrometer and the X-ray Fluorescence Spectrometer Advantageï¼? 1) high grinding efficiency: high power motor (2.2KW*2) higher grinding efficiency, sample processing time is not more than 20 seconds, even if a large load, still work reliably, eliminate burned motor fault due to overload produced, at the same time to protect the user's safe operation. 2) Double motor: grinding wheel (Ï?350), sand paper (Ï?350), double disc, double motor work independently. The utility model greatly improves the work efficiency and the equipment utilization rate, and simultaneously stops the problem of stopping production due to the accidental damage of the motor. It is very convenient and economical to change sand paper. It is suitable for making and processing the sample of ferrous metal and other metal materials, and preventing cross contamination of sample. 3) Environmental protection: compared with ordinary bag type dust removal system, GPM-II has the unique strengthening built-in dust removal system - Dust funnel and Dust net, dust collecting wall three protect, prevent dust overflow, eliminate the hazards of dust generated in the process of grinding on the human body, to ensure that laboratory clean, convenient cleaning equipment. 4) Humanization: install trays especially on the right to allow users to place samples and gadgets. Grinding mouth bell design, effectively reduce dust spill. Grinding edge arc edge design to prevent hand injury. Technical parameter: grinding plate Φ350 mm Exterior 950 x 1100 x 1100 mm(L*W*H) Input power supply 3x380V AC Input power 5KW Motor power 2.2KW x 2 Small sample clamp No
Information Max. RPMï¼?13.300 RPM Dia. ï¼?100mm,115mm,125mm,150mm,180mm,230mm Materialï¼?zirconia Aluminia Grit size ï¼?40-320# Centre hole dia.ï¼?16mm,22,23 mm Packing unitï¼? 10 pcs. Description High-performance flap disc for maximum stock removal on high carbon steel and stainless steel (INOX). Materials that can be worked: stainless steel (INOX) alloy-steel,cast iron and nonferrous metal Applications: deburring, chamfering, work on edges, weld dressing, work on fillet welds Drive types: angle grinder
Carbide Round Tools on CNC Machines: Flute Grinding, Gash Grinding, end facing, Clearance angle Cylindrical grinding. Model: fluting (1A1, 1V1), gashing and clear edge (1V1, 12V9), relief angle (11v9) Details: More SuperHard diamond / CBN grinding wheel for CNC tool grinder is used for tungsten carbide, high speed steel (HSS), stainless drill, end mill and reamer. We provide a complete solution for CNC tools manufacturing process, including fluting, gashing and Clear edge, relief angle grinding. Fluting Grinding: Perfect flute surface quality, Extremely high stock removal, Very low energy consumption Gashing and Clear edge: The production of superior tool edge quality, High stock removal, Maintaining wheel profile Relief angle grinding: Excellent surface finish and the best profile consistency, Excellent edge quality, High stock removal at second relief CNC Tools Grinder: Walter, ANCA, EWAG, Farman, Schutte, Schneeberger, Makino, Stuer, Strausak, Cininnati, Griffo, Huffmann, Jungner, CUOGHI, Fehlmann and so on. Meanwhile, More Superhard Products Co.,Ltd also supplies diamond cutting disc for carbide rods cutting, centerless grinding wheel for carbide bars, silicon carbide wheel for dressing CNC grinding wheel (dressing machines: Cleveland , Farman) and so on.
Yinglong also produce other typed grinding-wheels. Such as grinding-wheels to grind blades / cutters, milling cutters and so on. There are many types.
Welcome to oriental casting and forging(shandong) co., ltd. I, mr. Wang is glad to serve you Description: As one of the biggest manufacturers and exporters of grinding balls in china, we can produce several kinds of grinding ball 100000 ton annual and exports to more than twenty countries and areas such as japan, korea, canada, america, chile and south africa and has obtained a high reputation from the customers. 1. Passed the swiss sgs iso9001 international quality certification system And iso14001 international environment certification system. 2. Good quality: high hardness, good wear resistance, no breakage, even wearing. 3. Applied field: mines, cement plants, power stations, chemical industries etc. 4. Stable supply and sales year-round make us can be your good supplier. Product description: Specifications: Forged steel grinding balls Size: 20mm-150mm Brand material impact test endurance test surface core Ak.J/cm2 times(5m) (min) (min) Dt-2 60mn 13min 10000min 58 50 Dt-3 65mn 15min 12000min ≥60 50 Dt-4 b2 17min 12000min ≥60 52 Brand material c mn si cr s p Dt-2 60mn 0.57-0.65 0.7-1.0 0.17-0.37 0.25 0.035max 0.035max Dt-3 65mn 0.62-0.70 0.9-1.0 0.17-0.37 0.25 0.035max 0.035max Dt-4 b2 0.70-0.85 0.7-0.8 0.17-0.37 0.2-0.7 0.035max 0.035max If you are interested in my product, please send me your detailed information such as your drawing or detailed specifications, chemical composition requirement etc. And you will get our quickly reply 1bag/ton
Grinding media Packing in steel drums or container bags.
