Technical Parameter
Max web width 330mm
Max printing width 320mm
Max unwinding dia 1000mm
Max printing speed
(Production speed depending on process, job etc.) 60m/min
Gear pitch 3.175mm (1/8)
Product Introduction
This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc.
1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
 If parts (except wearing parts) are broken within guarantee time they will be changed for free.
 (it is not caused by human factor)
The client should pay for the cost following:
Â
    1. Visa fee
   2. Air ticket
   3. Diet
   4. Accommodation
   5. Labor fee:50 USD/day (within guarantee time)
    100 USD/day (without guarantee time)
Product Introduction
This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc.
1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
Technical Parameter Control System
Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs)
Inner Diameter 5-12mm Motion Controller Panel Master
Wall Thickness 0.3-1mm Operating Panel Panel Master
Stable Speed 1-40m/min. Language English
Winding Nose Two noses single belt Inverter 3.7kw Schneider
Machine & parts Painting Electric Components Schneider
Length fixing Encoder Pneumatic Components Jingwei
Speed Control By Inverter Servo Motor Schneider
Cutting System Multi-blades; 5 pcs online Servo Driver Schneider
Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin
Slider Shangyin
Paper straw collecting Manually Bearing Haerbin
Operator 1-2 person Configuration
Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers
Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers
Measurement & Weight Belt 5 Pieces
Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces
Working Space 7000*5000mm Extra blades 5 Pieces
Weight 1300kgs Useful Tool 1 Set
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
 If parts (except wearing parts) are broken within guarantee time they will be changed for free.
 (it is not caused by human factor)
The client should pay for the cost following:
Â
    1. Visa fee
   2. Air ticket
   3. Diet
   4. Accommodation
   5. Labor fee:50 USD/day (within guarantee time)
    100 USD/day (without guarantee time)
Suitable for producing different sizes of paper straws, from 5mm; 6mm; 8mm; 10mm etc.
1. Adopted with PLC controller; main motor is equipped with variable frequency speed regulation; touch screen man-machine interface. Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system. Servo synchronous tracking cutting system makes it higher precision and multi-blades cutting makes it higher efficiency.
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard.
Making spirally tube from Glue feedingã??winding, final cutting inline.
1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration.
2ã?? Paper stand , integral high speed design, constant paper tension control..
3ã?? Glue stand, glue temperature control, feeding amount control.
4ã?? Simple appearance, all motors put inside, make it easy for cleaning..
5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel.
6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed.
Splicing part & Glue system with lubrication
Tube forming part
7 knives cutting part
Delivery part
Technical parameter:
Model PS-80
Paper Layer 3 layers
Inner Diameter 4.5-12mm
Cutting system 7 knives
Cutting length 120-1100mm
Capacity Max 80m/min.
Glue system with lubrication Fully-automatic
Splicing Semi-automatic
Working air compressor 0.6Mpa
Power 5.5 KW
Weight 2000 KG
Working space 7000x5000mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:Three days for free
100 USD/day for extra
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product description:
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard.
Making spirally tube from Glue feedingã??winding, final cutting inline.
1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration.
2ã?? Paper stand , integral high speed design, constant paper tension control..
3ã?? Glue stand, glue temperature control, feeding amount control.
4ã?? Simple appearance, all motors put inside, make it easy for cleaning..
5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel.
6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed.
Splicing part & Glue system with lubrication
Tube forming part
7 knives cutting part
Delivery part
Technical parameter:
Model PS-80
Paper Layer 3 layers
Inner Diameter 4.5-12mm
Cutting system 7 knives
Cutting length 120-1100mm
Capacity Max 80m/min.
Glue system with lubrication Fully-automatic
Splicing Semi-automatic
Working air compressor 0.6Mpa
Power 5.5 KW
Weight 2000 KG
Working space 7000x5000mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:Three days for free
100 USD/day for extra
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product Introduction
This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc.
1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.
What Technical of our machine?
CFXG-5002 Multi-cutters Paper Straw Machine
Technical Parameter Control System
Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs)
Inner Diameter 5-12mm Motion Controller Panel Master
Wall Thickness 0.3-1mm Operating Panel Panel Master
Stable Speed 1-40m/min. Language English
Winding Nose Two noses single belt Inverter 3.7kw Schneider
Machine & parts Painting Electric Components Schneider
Length fixing Encoder Pneumatic Components Jingwei
Speed Control By Inverter Servo Motor Schneider
Cutting System Multi-blades; 5 pcs online Servo Driver Schneider
Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin
Slider Shangyin
Paper straw collecting Manually Bearing Haerbin
Operator 1-2 person Configuration
Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers
Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers
Measurement & Weight Belt 5 Pieces
Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces
Working Space 7000*5000mm Extra blades 5 Pieces
Weight 1300kgs Useful Tool 1 Set
Product description:
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard.
Making spirally tube from Glue feedingã??winding, final cutting inline.
1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration.
2ã?? Paper stand , integral high speed design, constant paper tension control..
3ã?? Glue stand, glue temperature control, feeding amount control.
4ã?? Simple appearance, all motors put inside, make it easy for cleaning..
5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel.
6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed.
Splicing part & Glue system with lubrication
Tube forming part
7 knives cutting part
Delivery part
Technical parameter:
Model PS-80
Paper Layer 3 layers
Inner Diameter 4.5-12mm
Cutting system 7 knives
Cutting length 120-1100mm
Capacity Max 80m/min.
Glue system with lubrication Fully-automatic
Splicing Semi-automatic
Working air compressor 0.6Mpa
Power 5.5 KW
Weight 2000 KG
Working space 7000x5000mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:Three days for free
100 USD/day for extra
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard.
Making spirally tube from Glue feedingwinding, final cutting inline.
1 Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration.
2 Paper stand , integral high speed design, constant paper tension control..
3 Glue stand, glue temperature control, feeding amount control.
4 Simple appearance, all motors put inside, make it easy for cleaning..
5 Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel.
6 Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
7 High speed, 80M/Min paper feeding, up to 70M/Min tube production speed.
Splicing part & Glue system with lubrication
Tube forming part
7 knives cutting part
Delivery part
Technical parameter:
Model PS-80
Paper Layer 3 layers
Inner Diameter 4.5-12mm
Cutting system 7 knives
Cutting length 120-1100mm
Capacity Max 80m/min.
Glue system with lubrication Fully-automatic
Splicing Semi-automatic
Working air compressor 0.6Mpa
Power 5.5 KW
Weight 2000 KG
Working space 7000x5000mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:Three days for free
100 USD/day for extra
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product description:
PS-80 paper straw machine is designed for making paper drinking straw. Meeting Food grade production standard.
Making spirally tube from Glue feedingã??winding, final cutting inline.
1ã?? Body structure, Heavy-duty steel welded after NC cutting. Stable ,Strong and small vibration.
2ã?? Paper stand , integral high speed design, constant paper tension control..
3ã?? Glue stand, glue temperature control, feeding amount control.
4ã?? Simple appearance, all motors put inside, make it easy for cleaning..
5ã?? Safety as the core design element, transformation part protected , covered with 1.2mm thick stainless steel.
6ã?? Stable, simple transformation principle, maintaining-free design, reduce maintaining frequency during operation.
7ã?? High speed, 80M/Min paper feeding, up to 70M/Min tube production speed.
Splicing part & Glue system with lubrication
Tube forming part
7 knives cutting part
Delivery part
Technical parameter:
Model PS-80
Paper Layer 3 layers
Inner Diameter 4.5-12mm
Cutting system 7 knives
Cutting length 120-1100mm
Capacity Max 80m/min.
Glue system with lubrication Fully-automatic
Splicing Semi-automatic
Working air compressor 0.6Mpa
Power 5.5 KW
Weight 2000 KG
Working space 7000x5000mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:Three days for free
100 USD/day for extra
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
