It is the important equipment of front preparation in welding pipe mill line ,maily used to hold steel strip to make coils unfold ,supplying raw material for the production line.
Including single cone, double cones, butt-to-butt cone.
The design of our reels incorporates a unique "bearing tube" with dual cup and cone Timken bearings to the mandrel and a heavy duty cabinet base. Both motorized and pull-off type reels are available, depending on the application.
Single-end configurations are provided as standard, and Double-ended configurations can be provided to optimize production efficiency by lowering the coil changeover time. Most models are available as Traveling Reels that can be combined with automatic centering functions.
Hydraulic expansion of the mandrel ( for 3 ton above uncoiler )
Pneumatic coil hold down arm ( for 1.6mm above thickness )
Double head rotation by foot pedal
Features
1.Save material changing time, improve production efficiency
2.Can work with straightener.
3.Can be changed to motorized by add motor and control box.
4.With manual and hydraulic two kinds of expansion type.
5.This machine is suitable for high speed punching, such as stator, rotor and ET sheet, etc.
DMMET, produces efficient and flexible production lines for trapezoidal and corrugated profiles. DMMET offers these solutions as multi-deck lines and as quick-change cassette lines. Roll forming machines for single profile production are also available from us.
New Technology Trapezoidal Sheet Roll Forming Machine consists of these parts;
Uncoil and uncoil car
Feeding unit
Rollform unit
Fly cutting unit
Stacker and stacker car
Electric control unit (SIEMENS)
Our components used on the lines are selected from fully European and Turkish well known brands.
For additional information, technical documents or price information you can send E-Mail.
For different thickness material continuous punching use
Work together with uncoiler machine for automatic production
Can be customized
Feature:
1.This series of straighteners are specially designed for the terminal products requiring high precision planningã??As we all know, coil material without leveling and stress elimination is not able to produce good product, so the performance of straightener in production plays a key role, and most of the precision straightener cost too much, so we introduced this superior and cheap product.
2.The straightening wheel and auxiliary wheel of this machine are made of imported SUJ2, and they are ground after heat treatment HRC60 degrees, starts production after plating the hard chrome and the milling to ensure the uniform of the chrome layers and the form tolerances of each bearing.ã??
3. The flattening adjusting adopts the single point balancing equipment ,with the index ring, which can find the leveling point rapidly.
4. Except the straightening roller, the additional feeding wheel improves the material punching precision.
5. Adopt the high precision wheels to prolong the operation time, and the frequency converter can be choosen according to the clients requirement, which enable the special material panel straightening more competitive.
6. Due to the difference in material quality ,material width and material thickness, there is no uniform numberical reference. Therefore, it is suggested to take small sections of material for straightening before mass production and continue production after reaching the effect.
PARENTNashik offers spot welding electrodes tips in different shape, style with threaded or taper as per international standards made in Chromium copper zirconium -C-18150 - group-A for spot welding gun, portable rocker arm welders & robotics gun.
PARENTNashik Electrodes types Cap tip, straight, single & double bend electrodes, threaded screwed, composite, crank, swivel, nut & stud, projection, tungsten & tungsten copper faced, BS807 electrode tips, flat, centre, offset, angle offset, cranked, spade, jobbing, reducing, ISO electrode tips, PSA style electrodes& many more.
Why PARENTNashik
#Quick Delivery #Best Price #Excellent Quality.
For more details send your requirements for free quote and samples.
Material to be handled
-cellophane from25 gsm
-polyethylene from 15 micron
-polyester from 12 micron
-paper from 20 gsm up to 150 gsm
-laminates up to max. 150 gsm
Technical data
Width:1500
Max. Jumbo roll dia : 1200 mm
Cutting width with max. Reel diameter 500 mm
With single standard reel holders: min. 70 mm / max. 210 mm
With single special reel holders : min. 55 mm / max.120 mm
Cutting width with max. Reel diameter 600 mm
With double reel arm holding system: min. Width 220 mm / max. 600 mm
-the machine or equipment is offered with six (6) months warranty from the test run at the location.
-availability is subject to prior sales.
-all information is given by the source, which deemed reliable.
Six-point, suspension mounting system
True constant pull tensioning system
Linear ball bearing string gripper with roller string guide and tension switch
11-90 pound (4.5-40.9 kilograms) tension range
360 degree swivel turntable with brake
Two slim diamond-coated, heavy-duty dual-action thumb-adjustable stainless steel swivel clamp (fixed clamps): 2 PN-1012 tennis clamps
Handle any diagonal stringing (fan patterned frames)
Features:
Digital electronic control panel with keypad and LCD digital display
Microprocessor controlled, electronic pulling and monitoring system provides the precise tension control and also displays the actual pulling tension.
Multiple speed settings for fast and slow pulls
Pre-stretch option provides 5% or 10% pre-stretch over the set tension.
Knot overtensioning option increases the current tension by 10%. This design is to reduce the amount of tension lost when tying off.
Two programmable tension memory bank
Self-test diagnostic feature
Unique power selection switch for the desired voltage 100/110V or 220/240V.
Power input with fuse protection
Six-point, suspension mounting system provides 10-point maximum supports and eliminates any racquet distortion.
Micro-adjustable head and throat mounting posts, very easy to adjust.
Single-action quick mounting arms: turn a single knob to control both shoulder support arms.
Large V-shaped shoulder supports perfectly fit against the frame and also provide the frame with the maximum shoulder support.
Padded head and throat mounting posts secure any frame (including deep V-shaped throats), no cosmetic damage to any frame.
Linear ball bearing string gripper with roller string guide and tension switch grips the string automatically. There is no string pull or muscle to use. Also no crimp or damage to any string. Easy fingertip to activate the tension pull. See operating procedures.
Dual-action swivel clamps can move in any direction up and down; and can handle all types of racquets without extra accessories.
2 slim diamond-coated, thumb-adjustable stainless steel swivel clamps (PN-1012). Stringing has never been as easy and efficient as it is now with the Eagnas thumb-adjustable clamp.
All-metal spring-assisted swivel clamp base: much easier to use and no muscle needed. Just need one-eighth turn to lock and release the base. See operating procedures.
360 degree racquet rotation with brake
Convenient tool storage area
Convenient reel holder
Machine base with level-adjustable pads
Height adjustable from 42" to 46", easy to adjust and string in a more relaxed posture
Tools: Allen wrenches - 6mm, 5mm, 3mm.
Free stringing tools: 1 DP-507 diagonal cutter, 1 NP-500 needle nose pliers, 1 BS-809 tennis awl, and 1 PN-3092 string mover
User's manual
Free illustrated stringing tutorial guide: show you how to string racquets step by step
String all racquets: tennis, oversized tennis, widebodies, longbodies, fan patterned, squash, racquetball, and badminton.
Easy to convert to table-top stringing machine; just need to remove the stand.
1 year warranty for the electronic tension head
1 year warranty for all the string clamps
2 years warranty for all the mechanical parts
Roll Former - Single Roof Panel - Wall Panel Metal Roll Forming Machines
Roll Forming Machine
With Automatic PBR-R Panel
Specifications:
Main Power 5.5kw 3 Phase 220v 60hz
Speed per minute, 60 ft per minute
Rolling Maximum thickness 24g - 0.8mm
Material coil size 45' - 43.25'
Hydraulic cut off
Computer control Siemens
Shaft diameter 3' - 75mm
Roll forming 18 stations
Machine length 36' long x 61" width x 60" height
Run off stands
Manual Uncoiler
Single panel, heavy duty, high precision roll forming machine for metal roof panel or wall siding profiles.
It is controlled by plc, man-machine interface, the state of all the motion can be set and adjusted by touch screen and with fault automatic diagnosis, alarm and indication.
With center distance eccentric adjusting mechanism and eliminate the backlash in main gear circular tooth mechanism, which make the structure compact and arrangement reasonable.
With automatic lubrication device.
The hydraulic oil tank is with cooling and heating device, temperature and level alarm.
Both pneumatic friction clutch and brake have the functions of single-action, serial action and inching etc.
With the features of slow hydraulic start and rapid rolling.
The work-piece is input automatically to realize automatic forging, which not only improve the production efficiency and quality, but also reduce the labor intensity.
The relevant movement between the forging rolls and mechanical arm is controlled by plc.
For the small size forging rolls, the lateral moving of mechanical arm clamp can be driven by the servo motor and the ball screw structure.
Servo motor driving mechanism and die constant temperature heating mechanism are adopted for aluminum alloy rolling.
