Plastic Primer For Auto Bumper

Plastic Primer For Car Bumpers

WALL BIND ACRYLIC Cement Primer Water Thinnable

No. Type WALL BIND Acrylic Interior Wall Primer (Water Thinnable) is suitable for useas a primer for painting of waterbased wall finishes such as distemper and plastic emulsions.
1 FEATURES WALL BIND has a special features are better whitness and opacity, easy brushing, excellent covering,alkali resistance,quick drying and good filling properties. Provides superior hiding and superior whiteness.
2 RECOMMENDED APPLICATION WALL BIND can be used for priming plastered wall,asbestose,brick work,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 130-140 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.

TOA Plastic Primer Spray No.63 is special primer to enhance adhesion for plastic surfaces such as polypropylene, polyethylene and ABS.
- Formulated by high quality concentrated resin
- Used for exterior and Interior
- 2 nozzles, normal and unique adjustable nozzles
- Able to spray upside down
- Good for all surfaces : wood, steel, and plastic
- Excellent durability , quick drying, and good adhesion

Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes.

Cod .:V400BODY