Calcium carbonate mud (carb-cake) is pressed, washed, and squeezed under pressure in fully automatic mud presses to reduce its sugar and moisture content, the produced press mud contains around 25%
moisture (w/w) as measured by loss on drying (LOD).
The resulting mud press looks like aggregates of small gravels thatâ??s composed of microcin sized crystals.
The Flow characteristics of such aggregates are very poor and makes it difficult to fill the trailer of
disposal truck which requires more journeys to dispose the whole quantity.
Below are the physical and chemical properties of the produced wet carbo-cake
Main Constituents in (wt%)
SiO2 3.82
TiO2 0.03
Al2O3 0.9
Fe2O3 0.38
MgO 0.61
CaO 44.73
Na2O 0.22
K2O 0.2
P2O5 0.4
SO3 0.96
Cl 0.03
LOI at 550C 30
LOI at 1000C 48
Rb2O 0.001
MnO 0.019
NiO 0.005
CuO 0.012
ZnO 0.004
SrO 0.013
Dried Carbo-cake converts it into free-flowing powder with a bulk density of 1.1 and reduced weight in
total resulting in reduction moisture to less than 5% and increasing its flowability characteristics
Areas of application
Concrete ready mix
Filler in paper industry
Filler in plastic manufacturing
Filler in concrete mix to adjust some physical and chemical properties
We deals in the following Chemicals :- Calcium Carbonate Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Brightness 95% powder Refractive index 1.59 Oil absorption (ISO787/5) g/100g DOP absorption(ISO 787/5) g/100g PH Value (ISO 787/7) 9.0 Bulk density 1.4g/cm3 Hardness in Mohs 3 Moisture 0.2% Caco3 99.6% Ca O 56.06% Mg O 0.01% Fe2 O3 0.001% Al2 O3 0.001% Si O2 0.01% L.O.l 43.89
Uses: -- Paint -- Plastics -- Rubber -- Putty -- Ceramics -- Chewing gum -- Coating -- Cosmetics -- Cables -- Paper -- Plastics Body powder
Industrial Food
Industrial
Calcium Carbonate (CaCOâ??) Powder is a naturally occurring mineral composed primarily of calcium and carbon. Known for its high purity, brightness, and low abrasiveness, calcite is widely used across various industrial sectors. It is highly valued for its ability to neutralize acids, enhance mechanical properties, and provide cost-effective filler material. Available in fine white powder with particle size ranging from 40 microns to 10 microns.
Calcium Carbonate Powder: Price of product (USD price or FOB price) - Contact Product origin - Viet Nam Calcium Carbonate Powder CaCo3: 98.50% min Moisture: 0.2% pH value: 8-9 Minimum Order Size and Packgaing details: Packing 50kg/bag, Minimum Order Quantity 20 feet container, 20 MT
Vital in construction and industrial applications.
Precipitated Calcium Carbonate (PCC) is synthetic calcium carbonate. It is white ultra-fine crystalline powder having consistent Particle Size Distribution and Excellent dispersibility. Precipitated Calcium Carbonate (PCC): High Purity lime stone is calcined in Lime Kiln to produce quick lime which is slaked and further carbonated to produce PCC slurry, which is filtered and dried to produce pure white PCC Powder. Activated Calcium Carbonate (ACC): Activated Calcium Carbonate is produced by surface coating the Precipitated Calcium Carbonate slurry with Fatty Acids (Stearic Acid) and Titanate Coupling Agent. Filtering and drying of the coated PCC slurry to produce ACC Powder. The particle size, as well as the crystal form, is controlled by temperature, concentration of reactants and time. Price: INR 5,000/- to 20,000/-
