Inconel Instrumentation Fittings are made from an austenitic alloy that contains chromium and nickel in their composition. The addition of these elements in their alloy enables Inconel Instrumentation Fittings to be extremely resistant to corrosion and oxidation. Inconel Instrumentation Fittings hold their integrity even in extremely high temperatures. corrosion is a serious issue for clients who use instrumentation findings in environments rich in corrosive elements. As a result, Inconel Instrumentation Fittings is an ideal choice as they can withstand these environments. With an increase in the amount of titanium and niobium content, the alloy can significantly be strengthened by the heat treatment process. Inconel alloy offers high strength along with corrosion resistance. When heated, these fittings create an oxide layer that protects them from the corrosive environment. Because of its corrosion resistance, Inconel Instrumentation Fittings would be an ideal choice in harsh environments. The compounds in the alloy act like an adhesive at the grain boundaries. When the material is heated to a high temperature, this adhesive prevents the size of the particles from expanding (smaller particles are stronger and larger particles are more ductile). In comparison to stainless steel, Inconel Instrumentation Fittings have significantly higher corrosion resistance and strength at high temperatures. In cryogenic circumstances, stainless steel outperforms Inconel.
Specification of Inconel Instrumentation Fittings
Imperial Size 1/2 to 2
Size 1/16 OD to 2 OD, 2mm OD to 50mm OD
Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc.
Pressure Rating 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Temperature Ratings Up to 1000 F (537 C)
Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories
Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Our service
Nace Mr 01 75
Sour Service
Impact Test As Per Ug 84
Macro Structure Analysis
Hydrogen Induce Cracking Test (Hic)
Sulphide Stress Cracking Test (Sscc)
Cryogenic Services (Cryo),hydrogen Services (H2)
Helieum Leak Test
Dye Peniterant Test (Dp)
Magnetic Partius Test (Mp)
Post Weld Heat Treatment (Pwht)
Ultrasonic Test (Ut)
Hydro Test, Etc.
Test Certificates
EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged/ Heat treated and machined
Product Details:
Usage/Application Oil Industry
Size 10-20 inch, 20-30 inch, 1-5 inch, 0-1 inch
Material Standard ANSI B16.5, ASTM A182, ASTM A351, ASTM A105
Rated Pressure (Bar) 2500
Country of Origin Made in India
FLANGE15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16,TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400FORMSLIP ON , SOCKET WELD , BLIND , LAPPED , SCREWED , WELD NECK , REDUCING , SPECTACLE ,SLIP ON BOSS , PLATE , PLATE BLANK , SCREWED BOSS.
Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
