10 HP-60 HZ 900 RPM NEMA D Electric Motor Product Description ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE.
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE.
ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE.
NEMA D Electric Motor Product Description NEMA standard high starting torque, high slip ratio three-phase asynchronous motors (D design) have insulation class F, protection class IP54 (IP55), 1.15 of service factor, 230/460V of the voltage rating, frequency 60Hz, -15 ~ 40 ° C of ambient temperature, altitude does not exceed 3300 feet. The motors are specially suitable for the machines like injection pump that require high starting torque, soft starting features as motive power. This series motors can be made as per customers special requirements. NEMA D Series Center Height of Frame 231T-449T Rated Power 3-150HP Service Factor 1.15 Supply Voltage 230/460V Rate Frequency 60Hz Structure IP54, IP55 Insulation Grade F ELECTRIC MOTOR 10 HP-60 HZ, 900 RPM, NEMA D SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 15 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 20 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE. ELECTRIC MOTOR 30 HP-60 HZ, 900 RPM, NEMA D, SERVICE FACTOR 1.15, 460V, PHASE 3, INSULATION CLASS F, BEARING TYPE: BALL BEARING 2Z, DOUBLE SEALED, BEARING BRAND NSK, SHAFT MATERIAL 1045 CARBON STEEL, COLOUR WHITE.
Kirloskar end suction pumps type DB Range : Delivery size upto 150 mm Capacity upto 550 m3 / hr Heads upto 100 metres. Application : Suitable for Circulation of Water in Industries, Air-Conditioning Plant, Power Station, Mine Drainage, Lift Irigation, Sprinkler systems, Fire Fighting, Booster service, pumping brine, alkaline solutions, oils, benzene etc. for liquids having temperature in the range of -100 to 1000 C. Constructional Features : These are single stage, single suction, horizontal shaft type. They are made in accordance with DIN 24255. Models are available to operate at 1450 rpm and 2900 rpm at 50 hz and 1750 rpm and 3500 rpm at 60 hz. Material of Construction : Pump Casing and : C.I. / Bronze / Ph.Br. Casing Cover Impeller : C.I. / Bronze / Ph.Br. Shaft : Carbon Steel / St. Steel.
specifications:sensor: electrochemical carbon monoxide sensor detecting range: 0-999ppm sensitivity: 5ppm error: ¡¨¤10% +15ppm the detecting precision is affected by detector itself and the temperature and humidity of the installation environment the best installation environment: 20 numerical readings and note: 3-digit lcd display of levels normal reading: 0 alarm readings: 30 - 999ppm battery capacity display: full, ok, low, dead sensor performance display: malfunction alarm modes: sound, beep, hummer light: red led flashing installation: wall and table power supply range: 110/220/230-240v ac backup battery: 1 x 9v alkaline battery working temperature: 0 - 60¡ãc relative humidity:
Anping tenglu metal wire mesh co., ltd Stainless steel twill weave wire mesh cloth In the twilled woven wire mesh, the wires of the weft and the warp intercross two above and two below, inverting the intersections of the warp wire at an established distance, obtaining a rigid, stable and robust type of wire mesh fabric. Crossed twilled wire mesh are basic components in the production of filters, colanders for aliments, chemicals products, shielding, mosquito nets, etc. Wire materials: Stainless steel wire: aisi 304, 304l, 316, 316l, 310, 314, 410, 430. Twilled woven wire mesh in carbon steel, galvanized steel, aluminum alloy, brass, phosphor bronze and other metals is also supplied. Ss 304 twill weave wire mesh Weave Type Mesh Count Wire dia. In inches Width of opening % of Open area Weigh per 100 sq�?? Based on ss 304 Inches Micron Twill 60 x 60 .0110 .0057 145 11.7 43.3 Twill 60 x 60 .0100 .0067 170 16.2 38.3 Twill 80 x 80 .0070 .0055 140 19.4 27.7 Twill 270 x 270 .0016 .0021 53 32.2 4.8 Twill 325 x 325 .0014 .0017 43 30.0 4.3 Twill 400 x 400 .0011 .0014 36 31.4 3.4 Twill 500 x 500 .0010 .0010 25 25.0 Twill 635 x 635 .0008 .0008 20 25.0 Ss 316 twill weave wire mesh Mesh Wire dia.(mm) Opening (mm) Material (aisi) 250 0.040 0.063 316 300 0.040 0.044 316 325 0.035 0.043 316l 350 0.030 0.042 316l 400 0.030 0.033 316l 450 0.028 0.028 316l 500 0.025 0.026 316l
Kirloskar Horizontal Axially Split Casing Pumps type UP Thrubore Range : Delivery size upto 250 mm Capacity upto 950 m3/hr Heads upto 52 metres. Application : Suitable for handling water with slight impurities in Industries, Water Works, Storm Water, Irrigation, Sprinkler Irrigation, Fire-fighting, Air Conditioning Plants, Water Circulation, Waste Water Treatment Plants, Processing Plants, Power Plants, Fertiliser Plants, Refinery, Paper, Sugar and Textile Mills etc. Constructional Features : These are horizontal axially split casing, single stage, double suction or single suction, single volute type pumps with horizontal shaft. Variety of models are available to operate at 50 Hz and at 60 Hz. Special Features : * Direct or gear drive. * Rotating assembly available for inspection or maintenance by removing only upper half casing without disturbing suction and delivery piping and motor. * Pump axis horizontal or vertical * Vertical pump, direct drive or with universal shaft arrangement * Highest reliability. Material of Construction : Casing half Upper/Lower - C.I.. / Bronze / SGI / Cast Steel / CF8M Impeller - C.I. / Bronze / Ph.Br. / Cast Steel / CF8M Shaft - Carbon Steel / ST. Steel Other materials on request.
POPULA fiberglass centrifugal fan GF4-72 A motor directly connected to FRP material Product Introduction: The GF4-72 Type A fiberglass centrifugal fan is a high-efficiency, high-performance, low energy consumption and environmentally friendly fan designed and improved by our company on the basis of the original 4-72 fan. This model has a more suitable appearance for gas flow performance. The GF4-72 fiberglass centrifugal fan is designed and improved based on the performance parameters of the metal 4-72 fan, and is made of fiberglass composite material. This series of fans can transport corrosive gases containing acid, alkali and chemical components. The transported gas is not allowed to contain viscous substances, dust and hard particles â?¤ 150mg/m�³, gas temperature â?¤ 60 â??, and relative humidity â?¤ 100%. This series of fans has the characteristics of high strength, light weight, non aging, good corrosion resistance, low noise, and smooth operation. It is a high-efficiency, high-performance, and low energy consumption universal anti-corrosion fan. This series of fans is widely used in chemical, electroplating, oxidation, power plants, laboratories, circuit boards, environmental protection equipment and other places containing corrosive gases. GBF4-72 fiberglass explosion-proof centrifugal fan is made by configuring EXdl or EXdl Class A/B explosion-proof isolation type motors according to customer usage conditions. It can transport flammable and explosive volatile gases such as methane, ethane, propane, styrene, toluene, xylene, carbon monoxide, acetic acid, kerosene, gasoline, furan, etc. Its performance parameters and installation dimensions are consistent with the GF4-72 fiberglass centrifugal fan. PRODUCTS INFO: Type:POPULA Fiberglass centrifugal fan GF4-72 A Brand:POPULA Electric Current:AC Power:0.75-15 KW Voltage:1HP/3HP 110V/220V/380V/440V/3KV/6KV Frequency: 50/60HZ Air Volume:580-21510 CMH Air Pressure:230~3180 Pa Speed:960-2900 rpm Max Noise:
