Cleanroom Sticky Mat

- It removes dirts n stains out of shoes n wheels at the entrance or important production area - High adhesion, ability to stick several types of dirt with a good friction, not slippery - Widely used in electronic, semiconduct, medical and cleaning industries, operation room...

Supplier: Glove, finger cots, mat, shoes, garments, wrist strap and heel grounders, cleanroom sticky mat and roller, cleanroom wiper, office products, cleanroom disposable products

Sticky mat Ally sticky mats made from high quality ldpe (low density polyethylene) film And specially formulated acrylic type adhesive, boast to achieve highest adhesion With lowest peel off strength as a user friendly sticky mat product; your customer Do not need to struggle with the sticky mat every time they need to peel off the Used sheet. Therer is no adhesive transfer. 1) film thickness: 0.05mm pe polyethylene film 2) adhesive thickness: around 0.008mm 3) 30 or 60 layers/mat, 10 mats/case 4) sizes: 18" x 36", 18" x 45", 24" x 36", 26" x 45" 5) colors: white, blue

Supplier: Cleanroom swabs, cleanroom wipes cleaning card and sticky mat

Sticky mat is mainly placed at the entrance of rooms that need to be dust-proof, or buffer areas . It is also applicable to the production lines of micro-electronic, semiconductor, lcd and pcb industries and so on. It can effectively stick and remove dust from soles , wheels and products to minimize the effect of dust on quality of clean environment. In this way, dust removal is easily achieved, unlike other mats that can not remove dust thoroughly and ensure indiffusibility of dust. The product consists of layers of pe films with digital labels of 1-30++++ on left or right lower corners of each layer to facilitate replacement. Firstly, tear the protective layer on the sticky surface off from the opening of the back. And then, stick it on clean dry access floor level. Press and level the sticky mat on the ground with sole. Tear the protective layer off from the opening of the right side. At this point, it can be used. If the surface of the sticky piece is full of dust during its use, this layer shall be torn off from the opening and then the next clean layer can be used. 30 pages /volume, 10 volumes / box, 5 boxes / case.

It can effectively stick and remove dust from soles , wheels and products to minimize the effect of dust on quality of clean environment. In this way, dust removal is easily achieved, unlike other mats that can not remove dust thoroughly and ensure indiffusibility of dust. The product consists of 30 layers of pe films with digital labels of 1-30++++ on left or right lower corners of each layer to facilitate replacement. Firstly, tear the protective layer on the sticky surface off from the opening of the back. And then, stick it on clean dry access floor level. Press and level the sticky mat on the ground with sole. Tear the protective layer off from the opening of the right side. At this point, it can be used. If the surface of the sticky piece is full of dust during its use, this layer shall be torn off from the opening and then the next clean layer can be used. Specifications: 18*36inch; 24*36inch; 26*45inch (other specifications can be customized) Color: blue, white (other colors can be customized) Packing method: 30 layers /piece, 10 pieces / box, 5 boxes / carton.

Sticky mats effectively prevent foot-borne and wheel-borne contamination from entering controlled areas by pulling dirt and debris off passing surfaces. These 30-layer floor mats are made of high strength PE materials, coated with water-based acrylic adhesive in our ISO Class 6 cleanroom (Cleanroom Class 1,000). They are available in 3 colors (white, blue or grey) and 4 standard or customized sizes to fit your needs.

Features Clean room sticky mat Substrate film Material Polyethylene Color White & blue Thickness Microns 35 ± 5 Mat size Regular 18'' * 36'' inch * 30 layers 46cm * 90cm * 30 layers 24'' * 36'' inch * 30 layers 61cm * 90cm * 30 layers 26'' * 45'' inch * 30 layers 66cm * 114cm * 30 layers Others Customizable Packing Carton 10 pieces / ctn or customizable Rupture elongation coefficient > 250% Adhesion type Water based adhesive Tensile strength Kg /cm2 > 170 Adhesion power G /25mm ( 100 - 1200 ) ± 50 1.Pe filmand material and water based adhesive 2.Convenient to use , environmental protection, our price is competitive; 3.Can easily remove sand/dust those dirty stuff from your shoes 4.No glue falling, odorless, non-toxic, a green production 5.Widely used in cleanroom, workshop of factory, industry

Disposable sticky mats 24"*36" disposable sticky mats 24"*36" disposable sticky mats 24"*36" Sticky mats Functions: - remove particles from shoes and wheels in each entry to the cleanroom Specifications: - made of thin layers of adhesive coated polyethylene film - various sizes, colors and styles - adhesive backing guarantees the mat stick to the floor - sheets are peeled off sequentially to expose a fresh adhesive sheet Applications: - cleanroom entrances - hospitals - operating rooms - factory-to-office entrances and other work areas requiring high level of cleanness Disposable sticky mats 24"*36" disposable sticky mats 24"*36" disposable sticky mats 24"*36" -