Water Based Coatings
- Primers, Gloss & High Scuff
- High Gloss/High Slip
- Duct Gloss & Matt
- Specialty Coatings
- Soft Feel / Satin / Neutral / Super Matt
PP8000SH
POLYESTER PUTTY - HEAVY
A combination of a special unsaturated polyester resin with a selected quick setting for subsequent coats for the complete Ritver paints system.
PP8004
POLYESTER PUTTY - LIGHT
A lightweight two-component Polyester based putty, formulated to exhibit very good adhesion and high elasticity.
This product is suitable for large surface areas; is easy to apply and provides excellent sandability.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
ARP330
2K PRIMER is an acrylic based high solids primer formulated to cater the needs of the automotive, construction, wood, and metal coating industry. It has durable and good resistance. The film has good toughness and gives a good flat finale finish.
ARP330H
A suitable 2K Hardener for curing of Acrylic Primer, ARP330.
NT1299
NC TOPCOAT is a preparatory coating designed to enhance adhesion and promote durability for subsequent paint applications.
Formulated with nitrocellulose and specialized additives, this primer provides excellent sealing properties, filling minor surface imperfections while offering optimal adhesion to various substrates including metal and plastics.
