We UNIMIX METAL CORPORATION, are one of the Leading, manufactures & suppliers of Slip On Flanges.
Slip On Flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications.
Material Used : Common materials used are as follows :
Stainless steel
Brass
Steel
Alloy Steel
Aluminum
Plastics
Titanium
Monels
Carbon steel
Alloy titanium etc.
A slip-on raised face (SORF) flange is a type of flange that is attached to a pipe by slipping it over the end of the pipe and welding it in place. The flange has a raised face on the inside, which creates a seal between the flange and the pipe. Here is an example of a SORF flange specification: NPS: 1/2 to 24 Inch Pressure class: 150 - 2500 Standard: ANSI/ASME B16.5, B16.48, 16.36, BS 4504, BS 1560, BS10, API 6A Material: Carbon steel, Alloy Steel, Steel, Ductile, Duplex Hub thickness: 0.5 inches Bolt holes: 8 holes, 1/2 inch diameter
We UNIMIX METAL CORPORATION, are one of the Leading, manufactures & suppliers of Slip On Flanges. Slip On Flanges are a popular type of pipe flanges. These are type of flanges that slide over the end of piping and then welded in place. These flanges are ideal for lower pressure applications. These are easily fitted and welded into different pipes. Welding reduces fabrication costs of these pipes. These are available in wide variety of sizes and applications. Material Used : Common materials used are as follows : Stainless steel Brass Steel Alloy Steel Aluminum Plastics Titanium Monels Carbon steel Alloy titanium etc.
Carbon Steel Forged flanges are a type of flange that is commonly used in high-pressure piping systems. They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel. Forged flanges are stronger and more durable than cast flanges, making them a better choice for applications where high pressure and/or temperature are present. Benefits of CS Forged Flanges â?¢ High strength and durability â?¢ Better resistance to corrosion and wear â?¢ Can withstand high pressure and temperature â?¢ Available in a variety of sizes and materials Applications of CS Forged Flanges â?¢ Piping systems â?¢ Valves â?¢ Pumps â?¢ Heat exchangers â?¢ Pressure vessels Types of CS Forged Flanges â?¢ Slip-on flanges â?¢ Socket weld flanges â?¢ Lap joint flanges â?¢ Threaded flanges â?¢ Blind flanges â?¢ Spectacle blind flanges Selection of CS Forged Flanges When selecting forged flanges, it is important to consider the following factors: â?¢ The pressure and temperature rating of the piping system â?¢ The type of material that the flange is made from â?¢ The size of the flange â?¢ The type of connection that the flange will be used with CS Forged flanges are a critical component of many piping systems. They provide a strong and reliable connection between pipes, valves, and other equipment. Additional Information â?¢ Forged flanges are typically made from carbon steel, stainless steel, or alloy steel. â?¢ Forged flanges are available in a variety of sizes, from NPS 1/2 to NPS 24. â?¢ Forged flanges are available in a variety of pressure ratings, from PN 2.5 to PN 400. â?¢ Forged flanges are available in a variety of connection types, including slip-on, socket weld, lap joint, threaded, and blind flanges.
Forged flanges are a type of flange that is commonly used in highpressure piping systems They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel Forged flanges are stronger and more durable than cast flanges making them a better choice for applications where high pressure andor temperature are present Benefits of Forged Flanges High strength and durability Better resistance to corrosion and wear Can withstand high pressure and temperature Available in a variety of sizes and materials Applications of Forged Flanges Piping systems Valves Pumps Heat exchangers Pressure vessels Types of Forged Flanges Slipon flanges Socket weld flanges Lap joint flanges Threaded flanges Blind flanges Spectacle blind flanges Selection of Forged Flanges When selecting forged flanges it is important to consider the following factors The pressure and temperature rating of the piping system The type of material that the flange is made from The size of the flange The type of connection that the flange will be used with Forged flanges are a critical component of many piping systems They provide a strong and reliable connection between pipes valves and other equipment Additional Information Forged flanges are typically made from carbon steel stainless steel or alloy steel Forged flanges are available in a variety of sizes from NPS 12 to NPS 24 Forged flanges are available in a variety of pressure ratings from PN 25 to PN 400 Forged flanges are available in a variety of connection types including slipon socket weld lap joint threaded and blind flanges
An expander flange is a type of flange that is used to connect two pipes or vessels. It is designed to allow for the expansion and contraction of the pipes or vessels without causing damage. Expander flanges are typically made of stainless steel or carbon steel, and they can be either welded or bolted. Here are some of the technical specifications of expander flanges: Pressure rating: Expander flanges are available in a variety of pressure ratings, from 100 psi to 10,000 psi. Temperature rating: Expander flanges are available in a variety of temperature ratings, from -200 degrees Fahrenheit to 1200 degrees Fahrenheit. Material: Expander flanges are typically made of stainless steel or carbon steel. Finish: Expander flanges can be either bare or have a protective coating, such as a paint or plating. Size: Expander flanges are available in a variety of sizes, from 1/2 inch to 24 inches.
The API 6A flange is a ring joint flange that is used in the petroleum, chemical, and gas industries. It is designed to withstand high pressures and temperatures, and is available in a variety of materials, including carbon steel, stainless steel, and alloy steel. The API 6A flange specification covers the following: Dimensions and tolerances Materials and welding requirements Pressure and temperature ratings Testing and inspection requirements Marking and documentation The API 6A flange is available in a variety of sizes, from 2 inches to 24 inches in diameter. It is also available in a variety of pressure ratings, from 2000 psi to 10,000 psi. The following are some of the technical specifications of the API 6A flange: Face-to-face dimension: The distance between the faces of the flanges when they are assembled. Hub thickness: The thickness of the hub, which is the central portion of the flange. Weld neck thickness: The thickness of the weld neck, which is the cylindrical portion of the flange that is welded to the pipe. Ring groove: The groove in the face of the flange that is used to seal the flanges together. Bolt holes: The holes in the flanges that are used to bolt the flanges together.
A JIS flange is a type of flange that conforms to the Japanese Industrial Standards (JIS) for flanges. JIS flanges are used in a variety of industries, including the oil and gas, chemical, and water treatment industries. The most common types of JIS flanges are: Welding neck flanges Slip-on flanges Socket weld flanges Threaded flanges Blind flanges The technical specifications of JIS flanges vary depending on the type of flange. However, some common specifications include: Pressure rating: JIS flanges are available in a variety of pressure ratings, from 1 to 200 kg/cm�². Temperature rating: JIS flanges are available in a variety of temperature ratings, from -20 to 420�°C. Material: JIS flanges can be made from a variety of materials, including carbon steel, stainless steel, and alloy steel. Finish: JIS flanges can be finished in a variety of ways, including hot rolled, machined, and electroplated.
A flat flange is a type of flange that has a flat face on both sides. It is the simplest type of flange and is commonly used in low-pressure applications. Flat flanges are typically made of steel, stainless steel, or cast iron. The technical specifications of a flat flange will vary depending on the material, size, and pressure class. However, some common specifications include: Nominal pipe size (NPS): 1/2 INCH - 24 INCH Flange pressure class: 150 - 2500 Material: Cast Iron, Steel and Stainless Steel Thickness: 1/4 INCH - 1 INCH Face type: RF, FF, RJT
A high hub flange is a type of blind flange that has a larger hub than a standard blind flange. The hub is the central portion of the flange that is used to connect it to a pipe or other fitting. The larger hub provides a more secure connection and also helps to distribute the load more evenly. High hub flanges are typically used in applications where there is a high pressure or temperature, or where a secure connection is critical. They are also used in applications where the flange needs to be able to withstand a lot of vibration or movement. The technical specifications of high hub flanges vary depending on the material, size, and class. However, some common specifications include: Material: Carbon steel, stainless steel, alloy steel, nickel alloy, titanium Size: 1/2" to 120" nominal bore Class: 150, 300, 600, 900, 1500, 2500 Hub height: 1" to 4" Bolt pattern: ANSI B16.5 or ASME B16.47 High hub flanges are typically manufactured to meet the following standards: ANSI B16.5: American National Standards Institute standard for flanges and flanged fittings ASME B16.47: American Society of Mechanical Engineers standard for blind flanges High hub flanges can be purchased from a variety of suppliers. When selecting high hub flanges, it is important to consider the following factors: Material: The material of the flange should be compatible with the material of the pipe or fitting that it will be connected to. Size: The flange should be the correct size for the pipe or fitting that it will be connected to. Class: The class of the flange indicates its pressure rating. Hub height: The hub height should be compatible with the gasket that will be used. Bolt pattern: The bolt pattern should be compatible with the bolts that will be used.
