Supplier: Lignosulphonate, naphthalene superplasticizer, polycarboxylate superplasticizer, retarding admixture, aliphatic superplasticizer
Hubei aging chemical co., ltd, is the largest manufacturer and exporter of lignosulphonate & sodium gluconate & sodium naphthalene sulfonate formaldehyde in middle china, with the output over 3, 000 metric tons every month for each kind . Sodium gluconate (sg99%) ?properties?: white crystalline granule or powder, easy to dissolve in the water ?molecular formula?: c6h11o7na ?molecular weight?: 218.14 ?quality standard ? index items standard value test results appearance white crystal powder meets the requirement purity =99% 99.2% ph value 6.0—8.0 6.70 sulphate =0.05% 0.03% chloride =0.04% 0.04% lead, ug/g =2% 1.38% loss on drying =0.5% 0.21% reducing substances =0.7% 0.38% ?uses? 1.It can be used as food additives. 2.It can be used as water quality stabilizer because it has excellent inhibiting capacity to scale. 3.It can beused as surface cleaning agent of metal 4.It can beused as cleaning agent of glass bottle 5.It also can be used as water reducing agent and retarder in the building & construction industry. ?packing, storage & transportation? 1, packing: 25kg/bag or 1mt/big bag. 2 , storage: kept in dry and ventilating place, prevent from rain and moisture when storage; If agglomerated, please crush and make it into solution, and its effect will be the same. 3 , transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.
Hubei aging chemical co., ltd, is the largest manufacturer and exporter of lignosulphonate & sodium gluconate & sodium naphthalene sulfonate formaldehyde in middle china, with the output over 3, 000 metric tons every month for each kind . ?product description ? Sodium lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high , adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from the sodium lignosulphonate and naphthalin-group high-efficiency water reducer .The sodium lignosulphonate is fit for apply to building project, dam project, thruway project etc. ?main performance? 1. Can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. Can be adopted as the adhesives in the briquetting procedure in the vertical retort zinc smelters. 3. Can be used as embryo reinforcing agents in the fields of pottery and porcelain and refractory materials. They can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4.In the field of water-coal paste, the sodium lignosulphonate series products can be adopted as the main compound materials. 5.In agriculture, the sodium lignosulphonate series products can be applied as the dispersant agents of pesticides and pelleting adhesives of fertilizers and feedstuffs. ?packing, storage & transportation? 1, packing: 25kg in pp woven bag lined with plastic film. 2, storage: kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same. 3, transportation:non-toxic, harmless, non-inflammable and non-explosive chemicals, it can be transported in truck and train.
Supplier: Construction chemicals for admixture, waterproofing chemicals, concrete superplasticizer, concrete admixture
Buyer: Maleic anhydride, styrene monomer
TPEG is a kind of main raw material (polycarboxylate ether monomer) for producing high performance water reducing type and slump retention type polycarboxylate superplasticizer, it is produced with isopentenol and ethylene epoxide as main raw material. CHEMICAL FORMULA â? CH2=C(CH3)CH2CH2O(CH2CH2O)nH, n=10~60 â? TPEG-2400 is a polyoxyethylene isopentenyl ether with molecular weight 2400.Itâ??s produced by isopentenol and ethylene epoxide as main raw material. PRODUCT CHARACTERISTICIS â? This product is the main raw material for high performance polycarboxylate superplasticizer â? The water reducer from this material(TPEG-2400) has good adaptability to cements. â? Compared with other polycarboxylate material, the production cost of water reducer from this material is greatly reduced. â? The water reducing rate of the water reducer (solid content 22%) from this material amounts to 30% under 1.1% concrete addition. â? The water reducer from this material is characterized by early strength,high-strength. The early strength and 28 daysâ??strength of the concrete is greatly improved, compressive strength ratio %: 1 Dayâ?¥180; 7 Daysâ?¥170; 28 Daysâ?¥150. â? The water reducer from this material has high durability,can efficiently reduce the water/gel ratio, enhance durability, reduce risk of shrinkage and creep. â? The water reducer from this material has less slump loss, which grows initially without compromising strength, it also has sustained release effect, slump retention is â?¥190 mm. â? The water reducer from this material is environment friendly, chloride ion is no more than 0.1%, comply with the ISO 14000 international environment protection management standard. RECOMMENDED FOR PCE made from TPEG-2400 can be used to produce high performance, high strength commercial concrete at work site or long-distant convey. PRECAUTIONS It is non-toxic, nonflammable and can be shipped as general chemicals. Avoid direct sunlight. Keep away from fire or any kind of heat source. Stored separately with oxidants and strong acids and alkali in cool and ventilated place. For more details, please contact with us~
HPEG is a kind of main raw material (polycarboxylate monomer) for producing high performance water reducing type and slump retention type polycarboxylate superplasticizer, it is produced with methallyl alcohol and ethylene epoxide as main raw material. CHEMICAL FORMULA:  CH2=C(CH3)CH2O(CH2CH2O)nH, n=10~60 HPEG-2400 is a polyoxyethylene methallyl with molecular weight 2400.It s produced by methallyl alcohol and ethylene epoxide as main raw material. PRODUCTS CHARACTERISTICS: This product is the main raw material for high performance polycarboxylate superplasticizer The water reducer from this material(HPEG-2400) has superior dispersibility, low dosage, high water reducing rate, high adhesive force, good reinforcing effects. The water reducer from this material has high durability,can efficiently reduce the water/gel ratio, enhance durability, reduce risk of shrinkage and creep. HPEG-2400 is non-toxic, non-corrosion, good water solubility. The water reducer from this material is environment friendly, corrosive free to steel bar, comply with the ISO 14000 international environment protection management standard. RECOMMENDED FOR made from HPEG-2400 can be used to produce high performance, high strength commercial concrete at work site or long-distant convey. PRECAUTIONS It is non-toxic, nonflammable and can be shipped as general chemicals. Avoid direct sunlight. Keep away from fire or any kind of heat source. Stored separately with oxidants and strong acids and alkali in cool and ventilated place. For more details, please contact with us
JLY-03 Series Early strength type is an eco-friendly new generation high performance polycarboxylate superplasticizer. It is based on the reaction between the molecule of polycarboxylate superplasticizer and cement, designing special structure molecule of polycarboxylate, to promote combination of granules of cements with hydrone, to finish hydrating and enhance the initial strength. FEATURES AND BENEFITS  Enhance high strength : It has higher early strength growth ratio, can reduce shrinkage performance and the carbonation rate of concrete.  High water reduction: Water reducing ratio can attain at least 25% at saturated dosage, which assures improving the workability of concrete, enhancing the concrete strength and saving cement application amount. Increase slump retention: No retempering, It can well delay the transport and on-site retention time of the concrete, assure the pumping performance of the concrete. Good cohesion: Ease of pumping, No delamination,No segregation or bleeding.  High flowability: Ease of placing and compaction. No segregation. RECOMMENDED FOR Pumped concrete Precast concrete Early strength concrete High flowability concrete  High early strength concrete Long distance transport concrete JLY-03 water reducing type series is available in 1000kgs, 200kgs, 25kgs drums or bulk delivery. Contact with us for more details please
High-performance Polycarboxylic Acid Superplasticizer is widely used in Concrete engineering. It can not only greatly reduce the amount of cement and water, but also significantly improve the workability of concrete, improve the quality of the project, reduce the cost of the project, save energy consumption, and have no pollution to the environment. FEATURES AND BENEFITS Improve the compressive strength of concrete (production of concrete with strength over 50N/mm²) Allows reduction of mixing water (up to 35%) without reducing the consistency of the concrete mixture. Reduced cement consumption, thereby reducing costs (while maintaining a constant water-cement ratio) Does not cause steel corrosion (low chloride content) RECOMMENDED FOR Pumped concrete High flowability concrete High durable concrete High strength concrete Ready-mixed concrete  Long distance transport concrete Dosage of JLY-01 should be decided according to the mix design, surrounding, the required water reducing rate and materials.Normal dosage is 0.7% weight of cement with a range of 0.25%-0.8%. Trial mixes should be made to determine the optimum dosage. For more details, please contact with us. Enjoy your day
Supplier: Concrete admixture, polycarboxylate superplasticizer, water reducer
