Prestige Electricaldept

The buyer would like to receive quotations for -

Product Name: Zone 2 Certified Burner

Specifications:
- For 5 Ton Boilers

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Sharjah, United Arab Emirates

Payment Terms : T/T

Looking for suppliers from : Worldwide

Value of purchase : USD 1000

Contact : Srudeen

The buyer would like to receive quotations for -

Product Name: Heating Burner Set

Specifications:
Type: 2 inch one head & 3" inch double head

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Qatar

Payment Terms : LC

Looking for suppliers from : India

Contact : -Suresh Krishna

The buyer would like to receive quotations for -

Product Name: JIS Marine Gate Valve

Specifications:
Non-Rising Gate Valve. Size: 150mm (6 Inch). ''Material: Cast Iron, Nominal Pressure: 10kgf/cm2 , Japan Industrial Standard, It Should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/ Equivalent .'' Qty 12 nos.

. Non Rising Gate Valve. Size: 125mm, 5 Inch). ''Material: Cast Iron Nominal Pressure: 10kgf/cm2 , Japan Industrial Standard, It Should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent'' Qty 20 nos

. Non-Rising Gate Valve. Size: 75mm (3 Inch). ''Material: Cast Iron, Nominal Pressure: 5gf/cm2 , Japan Industrial Standard, It Should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent '' Qty 10 nos

Globe Valve. Size: 75mm (3 Inch). ''Material: Cast Iron, Nominal Pressure: 5gf/cm2, Japan Industrial Standard, It Should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/EQUIVALENT.'' Qty 20 nos

Globe Valve. Size: 50mm (2 Inch). ''Material: Cast Iron, Nominal Pressure: 5gf/cm2 , Japan Industrial Standard, It Should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent .'' Qty 20 nos.

Quick Closing Valve for Fuel Line. Size: 32mm (1.5 Inch). ''Material: Brass or Equivalent, It should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent=.''Qty: 12 nos.

Quick Closing Valve for Fuel Line. Size: 25mm (1 Inch). ''Material: Brass or Equivalent, It should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent'' Qty 12 nos.

Quick Closing Valve for Fuel Line. Size: 20mm (3/4 Inch). ''Material: Brass or Equivalent, It should be Marine Class Certified, Brand New & Unused. Country Of Origin: USA/UK/EU/Equivalent .'' Qty 12 nos.
Long Handle Attached System Gate Valve (Cargo Valve) for Cargo Tank. Size: 150mm (6 Inch). ''Material: Cast Iron, Nominal Pressure: 10kgf/cm2 , Qty 18 nos.

Quantity Required : 126 Piece/Pieces

Shipping Terms : CNF

Destination Port : Bangladesh

Payment Terms : 50/50 cash and LC or 100% LC at sight.

Looking for suppliers from : Worldwide

Contact : Saroj Barua

The buyer would like to receive quotations for -

Product Name: Modified Graphite Burner Cap And Gasket Set

Specifications:
- Modified Graphite Burner Cap And Gasket Set Burner Cap 2 Nos & Gasket 1 Set
- Distribution Block Type Cl7
- Material: Rubber, Plastic
- Size: Standard
Packaging Terms : Wooden Pellets

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Doha, Qatar

Payment Terms : L/C Or T/T

Looking for suppliers from : Worldwide

Contact : Prajeet Kumar Srivastav

The buyer would like to receive quotations for -

Product Name: Cap And Gasket Sets

Specifications:
- Modified Graphite Burner Cap And Gasket Set Burner Cap 2 No. & Gasket 1 Sets
- Distribution Block Type Cl7
- Material: Rubber, Plastic
- Size: Standard
Packaging Terms : Wooden Pallets

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Doha, Qatar

Payment Terms : L/C Or T/T

Looking for suppliers from : Worldwide

Contact : Prajeet Kumar Srivastav

Please quote for the following wholesale product requirement -

Product Name: Gasket Set

Specifications :
Modified Graphite Burner Cap And Gasket Set Burner Cap 2 Nos & Gasket 1 Set
Distribution Block Type Cl7
Material : Rubber, Plastic
Size : Standard
Standard And Technical Data Sheet

Quantity Required : 1 Twenty-Foot Container

Shipping Terms : CIF

Destination Port : Doha, Qatar

Payment Terms : TT

Looking for suppliers from : Worldwide

Contact : Prajeet Kumar Srivastav

Please quote for the following wholesale product requirement -

Product Name: Pneumatic Auto Valves CPVC

Specifications:
Type: 1
• Pneumatic Valve
• Ball Valve
• DN 40 = 1.5”
• Atex Rated Zone II
• Single Acting
• MOC Body: CPVC / Hastelloy (Means; this material or the other, or combination of all, CPVC is more preferable)
• MOC Seat: CPVC/ PTFE/ HDPE (Means; this material or the other, or combination of all)
• Normally Closed
• Without Solenoid; Air control to be supplied by Pneumatic Panel
• With Open/Close dry contact limit switch position feedback
• Temperature Rating 60C and above.
• END CONNECTION: FLANGED-RF, CLASS: 150#,

Type 2:
Pneumatic Valve
• Butterfly Valve or Gate _ Please Quote for Both
• DN 150 = 6”
• Atex Rated Zone II
• Single Acting
• MOC Body: cPVC / SS316 ( means; this material or the other, or combination of all, cPVC is more preferable)
• MOC Seat: PTFE
• Normally Closed
• Without Solenoid; Air control to be supplied by Pneumatic Panel
• With Open/Close dry contact limit switch position feedback
• Temperature Rating 60 C and above.
• END CONNECTION: FLANGED-RF, CLASS: 150#,

Type : 3
Electrical Actuated Valve (MOV) _ Compact_ High sampling rate & Speed for continuous operation
• DN 80 = 3”
• Butterfly Valve or Gate _ Please Quote for Both
• Non-Zoned, Non-Atex Rated
• Command & Feedback signal: 4-20 mA or PROFIBUS PA (Please quote for both + delivery time for both Items)
• Power Supply (24 VDC or 220 VAC), please quote for both + provide a delivery time for both
• MOC Body: cPVC / SS316 ( means; this material or the other, or combination of all, cPVC is more preferable)
• MOC Seat: PTFE / cPVC ( means; this material or the other, or combination of all, cPVC is more preferable)
• Temperature Rating 60 ?C and above.
• END CONNECTION: FLANGED-RF, CLASS: 150#,

Type: 4
Pneumatic Valve
• Ball Valve
• DN 50 = 2”
• Non-Zoned, Non-Atex Rated
• Single Acting
• MOC Body: cPVC
• MOC Seat: PTFE
• Normally Closed
• Without Solenoid; Air control to be supplied by Pneumatic Panel
• With Open/Close dry contact limit switch position feedback
• Temperature Rating 60 ?C and above.
• END CONNECTION: FLANGED-RF, CLASS: 150#,

Type: 5
Pneumatic Valve
• Butterfly Valve or Gate _ Please Quote for Both
• DN 80 = 3”
• Non-Zoned, Non-Atex Rated
• Single Acting
• MOC Body: cPVC / PTFE ( means; this material or the other, or combination of all)
• MOC Seat: PTFE
• Normally Closed
• Without Solenoid; Air control to be supplied by Pneumatic Panel
• With Open/Close dry contact limit switch position feedback
• Temperature Rating 60 ?C and above.
• END CONNECTION: FLANGED-RF, CLASS: 150#,

Type: 6
• Air actuated,
• single acting, with analog positioner,
• 100mm= 4’’,
• MOC for wetted parts cPVC or SS,
• Butterfly Valve.
• For Water

Quantity Required : 80 Piece/Pieces(sample)

Shipping Terms : CIF

Destination Port : Saudi Arabia

Payment Terms : To be discussed with suppliers

Looking for suppliers from : Worldwide

Contact : Mohammad Al-Hamadah

Please provide a quotation to the following requirement from importer -

Product Name: GI Fittings

Specifications :
Item Description Qty Unit

1 GI Coupling 1/2" Weldable 1,500 Ea (10pcs/Bag)
2 GI Coupling 3/4" Weldable 1,500 Ea (10pcs/Bag)
3 Weldable 1" Coupling GI 1,000 Ea (10pcs/Bag)
4 Weldable 2" Coupling GI 500 Ea (5pcs/Bag)
5 GI Union Joint 1/2" 200 Ea (10pcs/Bag)
6 GI Union Joint 3/4" 1,000 Ea (10pcs/Bag)
7 GI Union Joint 1" 1,000 Ea (10pcs/Bag)
8 GI Union Joint 2" 500 Ea (5pcs/Bag)
9 GI Nipple 1/2" 25,000 Ea (10pcs/Bag)
10 GI Nipple 3/4" 33,000 Ea (10pcs/Bag)
11 GI Nipple 1" 5,00 Ea (10pcs/Bag)
12 GI Nipple 2" 1,000 Ea (5pcs/Bag)
13 GI Reducer 3/4" x 1/2" 20,000 Ea (10pcs/Bag)
14 GI Reducer 1" x 1/2" 1,000 Ea (10pcs/Bag)
15 GI Reducer 1" x 3/4" 6,000 Ea (10pcs/Bag)
16 GI Reducer 2" x 3/4" 200 Ea (5pcs/Bag)
17 GI Reducer 2" x 1" 200 Ea (5pcs/Bag)
18 GI Tee 1/2" 200 Ea (10pcs/Bag)
19 GI Tee 3/4" 4,000 Ea (10pcs/Bag)
20 GI Tee 1" 500 Ea (10pcs/Bag)
21 GI Tee 2" 100 Ea (5pcs/Bag)
22 GI Tee Reducer 3/4" x 1/2" x 3/4" 4,000 Ea (10pcs/Bag)
23 GI Tee Reducer 1" x 1/2" x 1" 1,000 Ea (10pcs/Bag)
24 GI Cross 3/4" 500 Ea (10pcs/Bag)
25 GI Cross 1" 500 Ea (10pcs/Bag)
26 GI Elbow 1/2" 1000 Ea (10pcs/Bag)
27 GI Elbow 3/4" 15,000 Ea (10pcs/Bag)
28 GI Elbow 1" 3,500 Ea (10pcs/Bag)
29 GI Elbow 2" 500 Ea (5pcs/Bag)
30 GI Reducer Elbow 1" x 1/2" 100 Ea (10pcs/Bag)
31 GI Reducer Elbow 3/4" x 1/2" 250 Ea (10pcs/Bag)
32 GI plug 1/2" with a hole 4,500 Ea (10pcs/Bag)
33 GI plug 3/4" with a hole 1,000 Ea (10pcs/Bag)
34 GI plug 1" with a hole 1,000 Ea (10pcs/Bag)
35 GI plug 2" with a hole 500 Ea (5pcs/Bag)

Galvanized Iron Fittings specifications
1.1 Ambient Conditions

All Fittings, materials and Equipment shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan.

The atmospheric temperature in Jordan varies between -10°C and 50 °C.

1.2 Potable Water Certification

All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements..

1.3 Toxic Materials
Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discoloration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health Non toxicity certificate should be provided.

1.4 Third Party Witness

The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them.

The supplier shall furnish an original certificate from a third party inspection agency showing all test resu

Quantity Required : MOQ

Shipping Terms : CFR

Destination Port : Aqaba, Jordan

Payment Terms : LC

Looking for suppliers from : Worldwide

Contact : Ramzi Saba