It is the most typical cold paint road marking machine, oftentimes called cold paint striper or cold striping machine as well, is widely used for spraying cold-solvent paint, water-based paint and other single-component paint, can be applicable to various construction environments as well. It has the characteristics of stable performance, flexible operation and convenient construction and so on. Engine 5.5HP Honda gasoline engine Marking method High pressure airless spraying Paint pump flow 9L/min Rated maximum working pressure 20Mpa Paint pump and control mode Piston reciprocating, single pump Applicable paint Cold-solvent, water-based and other single-component paint Marking width 100-600mm adjustable Spray gun quantity 2 manual fixed spray gun Dimension 1780x980x1200mm Weigh 150Kg
Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc. 1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient. 2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking. 3. Adjustable guide rod can be freely adjusted up, down, to the left or right. 4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work. 5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure. 6. Paint tank is with a build-in filter device and air in-take filter in the feeding port. 7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient. 1600*1200*1500mm(l*w*h)
Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2
Primer, a bonding material is used when making the heat fusion road markings. The prime can prevent the film from coming off and strengthen the adhesive force between the film and the road surface. Primer(sprayable) machine is the assistant equipment for drawing heat fusion markings. It chooses the gasoline engine as its power working together with the auto aircompressor to paint, which improves the working efficiency, meanwhile reduces the intensity of labor. It will not bring any noise or pollution. The guide bar of the paint gun can be adjusted up and down, in order to adjust the width of the paint accuratly and conveniently. The machine is easy to operate and maintain, moreover, its service life is long. Size: 800*400*850mm Net weight: 50kg
Thermoplastic Road Marking Paint is a 100% solids material blend of binder, pigments, glass beads, peformance additives and other wear-resistant fillers. The binder is made from petroleum-derived resins, it is the best used for long-lifespan road marking applications. Intermixed and drop-on glass beads provide retroreflectivity for nighttime visibility of the road marking. Its composition specification and physical technical data conforms to BS3262-1:1989 Part 1 standard.
1. Engine: original japanese honda or robin 13hp 4-stroke air-cooled petrol engines. 2. Chassis: firm welding frame, whose surface hass been chrome(zinc)-plated or corrosion resistant treatment, and the chassis is equiped with imported high-speed bearing which ensures the machine more lightsome and convenient. 3. Rubber wheel: left and right front wheels are inflatable vacuum wheels which are pressure-proof. Diameter: 350mm; The back jockey wheel is natural rubber wheel that is of special wear-resistant modification. Diameter: 190mm. 4. Front wheelf+s orientator: it can lock the orientator of the front wheel to ensure that the road marking machine turn freely whether it is along a straight line or a curve turning . 5. Guiding bar: it can freely adjust up, down, left, right. 6.Paint pump: we adopt the new diaphragm-type high-pressure paint-free pump machines manufactured by chongqing yangtze river application co., the pump flow rate is high and the pressure is steady, and it is reliable. The machine is appliable for cold solvent road marking paint. The maximum pressure 20mpa (working pressure for the 10-15mpa), the maximum flow of a single pump is 9l/min. 7. Paint can (optional): capacity:80kg. Can is equipped with a filtering system and the feed port is equipped with suction-type filters. 8.Spray gun: configured with three new manual spray guns and hard-edged cylindrical nozzle which is of the function of reverse cleaning (20/25 or 30/25). Non-arc nozzles make sure the markings straight and accurate. Switched carter single(double/three)-gun(s) controller is to insure the sigle cylinder and the double cylinder alternate freely. 9. Paint: it is appliable for cold solvent road marking paint . 10.Spray width: 80-450mm. Dimensions: 1350 mm (length)* 1000 mm (width) *1070 mm (height). Total weight: 135kg (without drums).
Zebra crossing heat fusion road marking machine is the accessory equipment for heat fusion making machines. It is used to smear the zebra crossing lines (sidewalk lines)and the entrance or export lines (guilding lines) on the high way. The pulling direction is same as the working direction. The machine uses hard alloy knife which can make the linef+s edges and corners neat and beautiful at one time. The knife is flexible and easy to adjust the thickness of the marking lines. Size: 1250*750*900mm Net weight: 90kg
Adopt special acrylic resins as the main raw material and have excellent adhesion and good whether resistance. Scientific mixture ratio makes the paint with high solid content which ensures the paint can be stock for a long time without deposition. The marking coat is thick and can be sprayed with reflective materials for a long-term reflective ability. The coating dries fast and the drying time are about 7 to 10 minutes under normal temperature. 25kg/bag.
The two-component road marking is a new type and superior road marking and popular in recent years. It is different from thermoplastic and cold paint road line marking, which forms coating relying on chemical reaction instead of physical drying such as temperature falling or solvent ( water-based) volatilizing. The two component road marking machinery can be divided into swing structure type, screeding flat-line type and high-pressure airless spraying type according to different paints and different construction shapes. Meanwhile, these three types road lines painting can be divided into marking vehicle, driving type line marking and self-propelled type according to different degree of automation, functional configuration, construction quality and efficiency. As for the two-component marking vehicle, its truck platform and electronic control system are basically the same with the airless road marking truck except its functional module. 3600*3200*1500mm(l*w*h)
