Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
The base material of the PET separator is PET, that is, a layer of silicone oil is coated on the surface of the PET film to reduce the adhesion on the surface of the PET film and achieve the effect of release. Conventional thickness from 25um to 150um. There are hot and cold tear and matte surface, after anti-static and anti-scratch treatment, the product has good adsorption and fit. PET film has high temperature resistance, temperature resistance over 220 , and the elongation at break is generally about 30%.
Description
LYSI-401 is a pelletized formulation with 50% ultra high molecular weight siloxane polymer dispersed in low density polyethylene (LDPE ). It is widely used as an efficient additive for PE compatible resin system to improve the processing properties and surface quality, such as better resin flow ability , mold filling & release, less extruder torque , lower coefficient of friction , greater mar and abrasion resistance
Benefits
(1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder torque , better
molding filling & release
(2) Improve surface quality like surface slip, lower Coefficient of friction, Greater abrasion & scratch resistance
(3) Faster throughput , reduce product defect rate. (4) Enhance stability compare with traditional processing aid or lubricants
How to use
Addition levels between 0.5~5.0% are suggested . It can be used in classical melt blending process like Single /Twin screw
extruders, injection molding. A physical blend with virgin polymer pellets is recommended .
Package
25Kg / bag , craft paper bag
Storage
Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life
Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.
