Specifications: net weight 350g
58cm Ã? 23cm Ã? 12.5cm
Total weight 1.15kg
Uses: Detecting the best breeding time after sheep estrus
Usage: 1. The detergent must be poured on the cotton cloth, the instrument probe should be wiped repeatedly, rinsed with water, used directly, and not wiped dry (clean the ewes, sticky feces, hair or ewes with a wet towel or toilet paper) Other dirt).
          2. Separate the vulva of the ewe by hand and gently insert the instrument upwards at a 45-degree angle. The white probe is left outside for about 2 cm. All other inserts. Then rotate the instrument for a week and a half to two weeks to allow the mucus to fully contact the probe.
          3. At this moment, keep the sheep in a normal standing position, turn on the switch, wait for a set of data to appear on the display, click the switch again, wait for the second group to appear on the display, then press the third button, the third group appears on the display. data.
          4. After the op eration, if it is detected again, it must be tested for at least 2-3 hours. Since there is a recovery period after the mucus is agitated, the second test cannot be performed immediately.
5. Keep the instrument clean and put it up.
Data judgment: data is above 600 when not estrus
          After the estrus, the data dropped to below 200, and then the breeding time was raised above 550.
Technical parameters: Test method: fully automatic one test
Test speed: within 3 seconds
Net weight: about 300 grams
Power: one 9 volt battery, model 6F22
Display: LCD display, about 2.6 inches
Measuring range: 10-1990
Working temperature: 0-50 °C
Maximum humidity: 85%
Basic configuration: one instrument
          One copy of the instructions
          One certificate
          One warranty card