Product Principle for trackless mould transfer cart The battery of the trackless mould transfer cart is placed inside the cart, which provides electric power to the motor through the electrical control module, thus providing power for the reducer to drive the wheel drive system, and operating and stopping the cart through an operating handle or wireless remote control. Product introduction for trackless mould transfer cart The trackless mould transfer cart has no fixed route and is flexible in action. The crane is used to lift the mould onto the trackless mould transfer cart. In order to prevent the mould from moving on the trackless mould transfer cart by inertia, the rubber board is laid on the deck and the mould is placed from each place. It is transported to the corresponding station and has its own safety detection device. It automatically stops when a pedestrian or an obstacle is encountered. It is safe and reliable. Features for trackless mould transfer cart The trackless mould transfer cart using rubber wheel,the larger the tonnage, the higher the flatness requirement of the ground, which is generally concrete or toughened ground. Due to the limited battery life, it is suitable for occasions with indoor irregular transport and low frequency of use. Advantages for trackless mould transfer cart 1, maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance; 2, unlimited remote control, simple operation, safe and stable; 3, standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault; 5, emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety; 6, polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip;