Introduction Cradle type cabling machine is used for cabling medium&low power cables, telephone cables, control cables or mining cables. This machine is suitable for laying up the multi-cores(3-7cores), section can be round or sector.The machine is mainly used to strand, wrap and armor big section area cables with 3 / 4 / 5 / 6 cores. The shape of the conductor can be circular, scalloped or cup. When producing circular cables, insulated wires can be processed with back twisting, while sector-shaped cables without it. Features: 1.The machine is with low cost com pare to other stranding machines, but produced by the machine with high quality. 2.The machine is equipped with back-twist stranding, electronic pre-twist, bobbin is clamped and released by electromotion. 3.The machine is equipped with PLC control system for pre-setting laying up pitch and for speed synchronization with the take up unit. 4.Caterpillar(belt) type haul-off unit driven by independent motor. 5.The machine can be equipped with taping or armoring device. Technical Parameters Specification CLY1000 1+1+3 CLY1000 1+6 CLY1250 1+1+3 CLY1250/1+6 CLY1600/ 2+3 CLY2000/2+3 Dia. Of inlet wire(mm) 5mm-20mm 6mm-25mm 10mm-35mm 15mm-45mm Lay up Dia.(mm) 60mm 80mm 100mm 120mm Frame rotation speed 10-25 5-13 3.9-11.2 Lay-up pitch(mm) 208-3680 420-7569 362-6969 Taping Speed(r/min) 188-419 188-419 Taping pitch(mm) 11.9-195.9 13-213 Armouring speed (r/min) 188-419 188-419 Armouring pitch (mm) 11.9-195.9 13-23 Capstan Dia.(mm) 2000 2000 2500 Linear speed(m/min) 4.98-36.82 5.31-40.08