Project: Assembly station Dimension : 12000l×1200w×780h(mm) Quality : One set Structure : Flat push delivery Function : This devices is suitable for all types of lighting , and other manufactures, dedicated to The assembly and packaging , safe, reliable , easy to operate Specification: 1. Body : Racks are made of 40×40 rectangle made of welded steel pipe;galvanized legs with Adjustable foot cups, body 2 m section. 2. Work table : With 15mm high-quality compression plate, anti-static rubber face stickers , width 1200mm, total length of 12 meters 3. Work power: Using 2000×50×25 galvanized trough, located in the fuselage on both sides of the Installation of three, two side outlets(on average one every meter installation) 4. Lighting : H-lamp mounted in the rack , use 40×20 square tube production, the connection of A frame body with every 2m and 2000×50×25 spray duct connecting the power, Lighting choice of 36w fluorescent tubes with cover single bracket, each 1.5 meters Installed a light tube, bilateral arrangement along the line .The lighting will be provided by buyer . 5. Electric control: Across the board is controlled by an electrical distribution box is completed, which Is about two working power of control 6. Card: Lighthouse located in the middle of the process all the way to guide the card holder, The use of h-type aluminum rail production, each station bill boards arranged a Transparent hard plastic a4 sets. 7. Second layers : Specifications for the 12000×300×15mm, 30l angle iron supporting;platen using High-quality 15mm compression plate, face stickers bright green fire board, located in The middle of the light house from the conveying surface 300. 8. Color : Computer write 9. Notes: The device does not include a machine outside power lines, electrical control , intake and Other peripheral devices.