LC 200A is safe, phosphatic alumunium cleaner and brightener. It’s strong formula will dissolve any oxide layer and also has the added benefit of providing a protective phosphatic layer to keep aluminum surfaces looking at their best. The non-toxic formulation also prevents further oxidation of the surface and repels dust build up owing to its electrostatic effect. It has penetrating agents that clings to alumunium surfaces for maximum effective cleaning result. Application Use LC 200A undiluted for initial cleaning and brightening on tough or built-up soil problem. Use diluted product for regular cleaning. Determine dilution depending on contamination type & frequency of cleaning. For on-going maintenance use LC 301 for a protective and shiny coat. For maximum cleaning, apply LC 200A with a highpressure washer Dosage The dilution will vary, depending on the condition on the surface to be cleaned. For best result, rinse with a high-pressure washer or apply with a brush. For normal cleaning & brightening; apply LC 200A at a dilution up to 1:20 with water. Allow the solution to react with the surface for 1 – 3 minutes, and then rinse thoroughly with clean water through a pressure washer. Do not allow LC 200A to dry on the surface. Repeat application if necessary. Handling & Precaution Contains mild acid. Do not ingest. Do not get in eyes or clothing. Wear a face shield, neoprene rubber gloves & protective clothing if spattering is expected. Keep the container closed when not in use. Avoid breathing the mists if produced during application by spraying. Use sufficient ventilation to prevent build-up of mists during application. Packaging Available in pail of 20 lt. Can also be custom packaged.