Equipment name: CNC Bending Pipe End Cutting Integrated Machine Application: The equipment is used for bending spatial pipes. It mainly applies to bending of pipelines of air conditioners, water heaters, airplanes and automobiles and so on. Technical parameters: 1 Bending partMaximum bent pipe diameter × wall thicknessf15×1.6mm (copper, aluminum pipes) 2 Bending radiusSingle mode: maximum 60mm/minimum 10mm, 3 Workpiece length (maximum)1200mm; 4 Straight feeding axle (Axis X)Stroke:0--1200mm 5 Speed:0--1200mm/sec, 6 Precision: ±0.05mm 7 Spatial rotation axle (Axis Y)Angle:0--±360° 8 Speed:0--600°/sec 9 Precision: ±0.05° 1 0Bending axle (Axis Z)Angle:0--200° 11 Speed:0--300°/sec 12 Precision: ±0.05° 13 Cutting partOne-time feeding stroke1,000mm 14 Straightness tolerance=2‰ 15 Repetitive fixed length errorL=1000 mm=0.3mm L=1000 mm =0.6mm 16 Pipe orifice inner diameter necking ratef < 20% 17 One-time cutting alignment=0.5mm (L=1000) 18 Surface conditionCopper pipe surface is free from obvious drag, scratch, pressing marks or knurling scratches; pipe orifice is free from burrs. 19Copper pipe roundnessThe pipe orifices of copper pipes with?12.7 and below are flat and smooth, their external diameter out-of-roundness =3%; the external diameter out-of-roundness of copper pipes above?12.7 =0.4mm. 20Pipe end methodHydraulic 21Number of Pipe end positions2 22Processing methodCold forging/spinning 23Overall efficiency3~4 sec/bending 24Power supplyThree-phase four-wire 380V \ 50Hz \ 4Kw 25Dimensions & weightL4000*W1000*H1300mm \900kg 26Air source pressure0.5--0.7MPa 27Hydraulic pressure5--7MPa