Application Liquid loss-in-weight feeder is designed to provide gravimetric feeding of liquid materials.It is most frequently applied in continuous processes,such as feeding a compounding extruder where difficult flowing liquids must be metered at precise feed rates. These liquids are often waxy or viscous and must be heated to flow properly. Characteristics ¡ï consists of a storage tank mounted on a high accuracy scale designed for industrial applications. ¡ï The liquid is metered by a pump positioned off the scale so that only the liquid and its container are weighed. ¡ïIf the temperature of the liquid to be fed must be maintained at a constant level, a strip heater or transfer heater using oil or water may be employed. ¡ï When using a strip heater, temperature is controlled by a thermostat and a safety thermostat. An insulating jacket is placed over the strip heater. The connecting line is also heated and thermally insulated. ¡ï When using heat transfer, the tank is double-walled and filled with oil or water. ¡ï The sophisticated load cell provides split-second, high precision weighing in the milligram range and is specially designed for harsh industrial environments. ¡ï Liquid feeders are easily integrated with gravimetric bulk solids feeders. The gravimetric controller and operation interface allow for individual unit and recipe control. Each feeder has its own control board. Connection between control boards and operation interface is supported by industrial protocol. Plywood case, 1 set/case