Ultra-fine with consistent particle size High purity High whiteness typical High brightness typical - Ultrafine product with purity and consistent particle size. Our PMC - 10 is good funtional filler in paper which help to save cost of fiber with unchange paper quality. PMC - 10 could be applied as coating pigment also for its small particle size and high whitness typical and brightness typical. - For plastics application, PMC - 10 low density should result in the output of processing lines while achieving improved impact strength and higher stiffness. The applications are film, PVC pipe, cable, PVC profile, roofing. - PMC - 10 filler in paint would result in opacity, wet-scrub resistance. Chemical Analysis Calcium Carbonate Typical : MIN 98 % - Magnecium Oxide Typical : MAX 0.4 % - Silica Typical : MAX 0.2 % - Aluminium Oxide Typical : MAX 0.1 % - Iron Oxide Typical ( Max ) : MAX 0.02 % - Loss on Ignition Typical : MAX 43.8 % - PH Value Typical : 8 TO 9 Physical Properties (product before coating stearic acid): - Specific Gravity Typical : 2.7 g / cm3 - Brightness Typical : MIN 95 % - Whiteness Typical : MIN 97 % - Max Moisture Typical : MAX 0.2 % - Hardness Typical : MAX 3 Moh - Oil Absorption Typical : 23 g/100 g CaCO3 Test Methods - Chemical Analysis Method - Particle Laser Difraction : MALVERN ( Made in England ) Whiteness Analyser : MINOLTA CR-200/CR-210 ( Made in Japan ) Please contact for further product information, application information, price and term 25 Kgs PP PE Bags 50 Kgs PP PE Bags 25 MT to 27 MT per 20 feet container