400 MHz MIPS Processor Enigma 2, Linux Operating System 2 LED status MPEG-2 / H. 264 Hardware decoding Tuner: DVB-S2 1 x Smartcard-Reader Mini USB for Service and software update 10/100Mbit Ethernet Interface 1 x Scart (RGB, FBAS, YUV or S-Video) HDMI Analog modem S/PDIF Interface for digital bit stream out (AC-3) 64 MByte Flash, 256 MByte RAM Unlimited channel lists for TV/Radio Channel-change time < 1 second Automatic service scan Directly bouquet-lists EPG (electronic program guide) Multiple LNB-Switching control (supports DiSEqC) OSD in many languages and skin-support Videotext Decoder External 12V power supply DBS-Tuner, DVB-S2: Frequency Range 950...2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK, QPSK) Symbol rate DVB-S: 2...45 Mbaud/s, SCPC/ MCPC DVB-S2: 10 -31 Mbaud/s (8PSK), 10 -30 Mbaud/s (QPSK) Video decoder: Video Compression MPEG-2 and MPEG-1 compatible, H. 246 Video Formats 4: 3 / 16: 9 Letterbox for 4: 3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3 Audio Mode Dual (main/sub), Stereo Frequency: 32 KHz, 44.1 KHz, 48 KHz, 16 KHz, 22.05 KHz, 24 KHz Output analog: Output Level L/R 0, 5 Vss on 600 Ohm THD > 60 dB (1 KHz) Crosstalk < -65 dB Output digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 KHz, 44.1 KHz, 48 KHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, YUV, RGB, S-Video MiniUSB service connector Function: Firmware update Ethernet: 10/100 MBit compatible interface Function: Firmware update Analoge modem: Analoge modem for Internet connection LNB power and polarisation per tuner: LNB Current 500mA max.; Short-circuit-protected LNB Voltage vertical < 14V no load, > 11, 5V at 400mA LNB Voltage horizontal < 20V no load, > 17, 3V at 400mA Count of active satellite position: DiSEqC 1.0/1.1/1.2 and USALS - Rotor Control Power consumption: < 12W at 12V in operation < 1W in standby External PSU Input: 110-240V AC / 50-60Hz / 0, 6A Output: 12V = / 3, 0A Physical specification: Ambient Temperature +15C...+35C Humidity < 80%. Size (W x D x H): 195 mm x 130 mm x 40 mm Weight: 1, 7 kg.