Standard features Stainless steel construction Servo motor controlled film pull belts Servo motor controlled jaw seal actuation Mitsubishi touch screen operator interface Mitsubishi plc - based control system Automatic program set-up Instant program changeover Mark sensor (fiber optic) registration control Quick change former assembly Product clamp and settler Full safety guarding and interlocks (option) Ce approved electrical Accessories and options Polyethylene seal systems Material stopper Load shelf for heave bag support Tear notches Nitrogen gas flush systems Hole punch (round or euro) Vacuum assist units Static eliminators Gusseted device Special power requirement Transformers for non-standard voltage Special end-seal configurations Model bx-400 bx-600 bx-700 Bag width: 50-160mm on pillow bag 75-240mm on pillow bag 90-285mm on pillow bag Bag length: up to 200mm on a single pull up to 300mm on a single pull up to 330mm on a single pull Speed: max. 100bpm(single pulling) Max. 50bpm(double pulling) max. 100bpm(single pulling) Max. 40bpm (single pulling) max. 100bpm(single pulling) Max. 40bpm(double pulling) Actual speeds are dependant upon product characteristics, bag size, packaging material, filling system etc. Electrical 220 vac +5%/-10%, 1° with ground (pe), 50 hz 3.5kw service required Air consumption 0.2m3/min @ 6 bar for 100 bpm Temperature nominal ambient 10-35¦c (50-95¦f) Humidity less than 90% non-condensing 850kg 1700*1500*1900mm