Eltek Micropack Rectifiers 12V/120W 241120.300 INPUT DATA Voltage range 85 - 300 VAC/DC 1) Voltage range (nominal) 130 - 275 VAC/DC 185 - 275 VAC/DC 1) Frequency 0 - 66 Hz 1) Maximum current, 230V input / overall (boost) 0.6 A / 2.0 A 1.2 A / 2.0 A 1.2 A / 1.9 A Maximum earth leakage current 2.0 mA (@ 250VAC/50Hz) Power Factor 0.97 (@ 70 - 100 % load) 0.98 (@ 55 - 100 % load) 0.98 (@ 50 - 100 % load) THD (@ 230 VAC) < 5 % (@ 80 - 100 % load) < 5 % (@ 50 - 100 % load) < 5 % (@ 50 - 100 % load) Protection Varistor for transient protection, fuse in both lines (2x 2.0 A), shutdown above 300 VAC/DC OUTPUT DATA Default voltage 13.6 VDC 27.2 VDC 53.5 VDC Voltage range 10.7 - 18.0 VDC 21.5 - 36 VDC 43.5 - 57.6 VDC Voltage range without controller 10.7 - 15.0 VDC 21.5 - 30 VDC 43.5 - 57.6 VDC # Pb cell supported (1.8 - 2.4 VDC/cell) 6 - 7 12 - 15 24 # NiCad cell supported (1.05 - 1.65 VDC/cell) 10 - 112) 20 - 222) - Max power, nominal / 60s boost 120 W / 160 W 240 W / 315 W 250 W / - Max current, @12/24/48VDC / boost / QT3) 10 A / 15 A / 55 A 10 A / 15 A / 55 A 5 A / - / - Current sharing �±5% of maximum current from 10 to 100% load Static voltage regulation �±0.5% from 10% to 100% load and nominal input Dynamic voltage regulation �± 5 % < 10ms, load step 10% to 90% or opposite at nominal output voltage Hold-up time, default voltage and full power 20 ms, VOUT > 10.7 VDC 20 ms, VOUT > 21.5 VDC 20 ms, VOUT > 43 VDC Rippel and noise, 30 MHz b.w. / psophometric < 200 mVPP / 5 mVRMS < 200 mVPP / 5 mVRMS < 150 mVPP / 2 mVRMS Protection Overvoltage shutdown, short circuit proof, high temperature, hot plug-in inrush current limiting, fuse