JZC Waste Oil Refinery Plant Application: Waste oil usually collected from machinery, vehicles, ships etc. which color is black and very dirty. Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. thereby it is harmful for the lubricating system and car engine etc, waste oil lost itâ??s control friction which have to be replaced. Transitional way to recycling the waste oil is by acid way,So our company researches the new waste oil vacuum distilling machine (JZC waste oil distillation machine), it is special for distilling and regenerating the black waste lube oil, including waste engine oil, lube oil, hydraulic oil, gear oil, dirty diesel oil, mixed oils etc. JZC waste oil distillation machine heat the waste oil to (from 110 to 350) different temperature under high vacuum condition, making Hydrocarbon molecules break out, and re-order combination, forming diesel oil, lubricating base oil etc. JZC machine is very suitable for the small oil refinery company, also for the small oil company who want to make the oil by self. Advantage: Safety design, during the working process, raw materials oil is always flowing and flashing between the distillation tank and heating system, there is no any coking happen in the pipes and tanks, so the system is 100% safety, and long life time. There are optional ways to heat the oil, like the boiler way by using fuel, natural gas or coal. Also, if machine is small capacity, we can use the electric heating way. By using the high vacuum distilling way, so the distilling temperature is low, energy saving and safety. Using the special chemicals to catalyze the waste oil, which makes sure the final diesel oil, gasoline oil and base oil are good anti-oxidation with good color, there is no bad odor. The final oil can be storage for one year without color change and odor change. Technical Parameter: Index Unit JZC-2 JZC-5 JZC -10 JZC -20 Capacity Ton / day 2 10 20 Recovery ratio % Above 85% Working pressure MPa 0.4 Working vacuum MPa -0.08 ~ -0.0998 Working Temperature 80-350 Working Noise dB (A) 75 Power supply V 380v, 50hz, 3Phase (Or According user demand) Heating way Electromagnetic-Heater or boiler ( fuel, natural gas or coal) Pump Motor Power kW 15 25 45 60 Working Size M2 200 300 500 700 Recovery rate: Final products Ratio Percentages Distillation temperature Vacuum Value Water 2% 80-110 -0.098 Gasoline and diesel 8% 120-210 500Pa Light base oil 40% 220-290 300Pa Heavy base oil (Viscosity SN150 ) 45% 300-350 200Pa Oil Residual 5% Total 100%