For different thickness material continuous punching use Work together with uncoiler machine for automatic production Can be customized Feature: 1. Due to the different curvature of the material, a single correction roll distribution can not meet the high-precision straightening requirements, STL series original use of large-row rough, small-row-length fine-precision, arrangement of different straightening concept, the use of coarse-corrected material roll to produce a single curve and then with fine stamping to correct, so as to meet the customer's use requirements. 2. The machine leveling wheel and the leveling auxiliary wheel are manufactured with imported SUJ2, heat treatment HRC60 degrees grinding, and then pass hard chrome after grinding to ensure uniform and shape tolerance of each shaftã?? 3. The machine's crude and straightening flat adjustment is made with a floating four-point balance fine-tuning device with a percentage table to quickly find the leveling point . 4. This machine adopts universal drive, gear full transmission, suitable for the straightening high accuracy requirements o products. 5. The full machine uses high-precision bearings and lubrication system to extend the service life. 6. Each orthopedic wheel of the S S-Series precision correction machine is equipped with a leveling auxiliary wheel to ensure that it does not bend and deform during the production process, thereby improving the quality of the product's flatness. 7. The upper and lower auxiliary rollers are fixed, which enhances the rigidity of the upper and lower wheels and prevents force deformation. 8. Due to the material, material width and thickness are different, there is no unified numerical reference. So it is recommended that take a small section of material to try before mass production, when it achieves the effect, then starts continuous production. 9. Two-stage straightening, combines the performance of two leveling machines.