Please provide a quotation to the following requirement from importer
Product Name: Fittings
Specification :-
Type :- Fittings Adapters, Couplings, Elbows, Etc.
Material :- Alloy, Brass, Steel, Etc.
Specification Required :- Product Should Comply With :-BS Standard, Good Quality, Complete Range, Should also be Approved from Testing Laboratories & Supplier should be able to submit The Approval from Bahrain Ministry.
Please provide a quotation to the following requirement from importer -
Product Name: Fittings
Specification :-
Type :- Fittings Adapters, Couplings, Elbows, Etc.
Material :- Alloy, Brass, Steel, Etc.
Specification Required :- Product Should Comply With :-BS Standard, Good Quality, Complete Range, Should also be Approved from Testing Laboratories & Supplier should be able to submit The Approval from Bahrain Ministry.
Please provide a quotation to the following requirement from importer -
Product Name : Plugs & Sockets
Specifications:
Fashion portable world 3 Port USB Type C Universal Travel Adapter with Universal Travel Charger Worldwide Voltage
Quantity:
250 Piece/Pieces
Specifications:
1. Equipment Specification:
Item Specification
Type Shotcrete machine (preferably dual-capable: wet & dry mix)
Application Foam concrete, dry mix guniting
Maximum Vertical Pumping Height = 250 meters
Horizontal Pumping Distance 400 meters
Concrete Output Capacity 5–9 m³/h
Aggregate Size Supported = 10 mm
Pump Type Manufacturer to specify
Compressor Requirement Built-in or compatible (min. 7–10 m³/min ****7–8 bar)
Electric/Diesel Power Electric
Hopper Capacity = 50–80 litres
Control Panel Remote or wired control
Certifications CE / ISO 9001 or equivalent
Warranty Minimum 1 year
Service & Support Availability of spare parts and local after-sales service
2. Additional Requirements
• Compatible with foam concrete (lightweight mix)
• Adaptable for vertical lifts in high-rise applications
• Minimal rebound during guniting
• Include delivery timeline
• Optional: include on-site training, commissioning support
3. Documentation and Warranty:
• Technical datasheet
• Operation and maintenance manuals
• Warranty terms and conditions
4. Accessories and Spare Parts:
• Provide a list of included accessories.
• Provide recommended spare parts list with pricing.
Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Specifications:
Quantity Required: MOQ
NOTE: Seeking an OEM/ODM partner for full physical assembly (no software required).
Requirements:
Plush Material: Polyester
External Size: Approx. 14.5” H × 13” W × 7.7” D
Internal Frame Fit: Approx. 13” × 8” × 7”
Cutouts Required:
Front screen opening (12.5” × 7”)
Side microphone hole (3–4” diameter)
Rear ventilation hole (3–4” diameter)
Bottom plug port for external power
We will supply all electronics including:
Raspberry Pi 4
13.3” monitor
Speakerphone (Jabra 410)
Webcam (Logitech C270)
Power adapter
USB cables
We are flexible on shipping (FOB/CIF) and payment terms (TT or LC) and are open to your MOQ and production lead time. Destination port is the United States.
Attached files:
LukaBear-FrontDiagram.png – front diagram with measurements and cutouts
LukaBear-BackDiagram.png – back diagram with ventilation and plug layout
LukaBear-frontDesign.png – 3D view of the final front appearance
LukaBear-backDesign.png – 3D view of the back appearance
