Material : Stainless steel AISI 304,
# 4 finish
Dimension as per requirement
Easy Cleaning
Hygienic
Resistant to corrosion
Resistant to high temperature
Strong
Long lasting
Cost effective
Eco friendly and completely recyclable
1. Size: 1200l*600w*1200hmm
2. Table top; high quality mdf with melamine board, durable
3. Frame: strong iron tube with powder coated, antirust
4. Design: as photo, fine workmanship
Commercial Kitchen Refrigeration Pizza Working Table
Features:
1.High density insulation for cooling system
2.Static or ventilated system are available
3.s/s AISI 304 as our standard.
4.400Ã??600 mm pan & GN1/1 shelf size for operation
5.Top open for salad display
6.Tempered 8mm thickness glass
7.Europe brand controller
8.Cutting board with PP
9.Round corner hygiene
10.Inner botom use bend line to drain pipe
11.S/S top sparetely to interchange with marble
12.S/S top special design for ventilated space
13.Castor is available
14.Futurer high quality duty slider
15.Solid door can interchange by drawer.
16.Ventilated hole to help fresh air smoothly
17.Embraco compressor
18.Ebm fan
19.E-coated evaporator
20.Glass door is available
21.Light led is available
This equipment has been produced be internally or externally in its aesthetics and componability in response to the specific exigencies of our clientele furthermore it has been mechanically and aesthetically checked in every aspect before dispatch. For the correct utilization of equipment: carefully read the instructions, observe all the recommendations contained therein, consign this manual which constitutes an internal part of the essence of the equipment to the end user who is requested to retain it for future consultation. By observing these recommendations, you willguarantee the extended trouble-free operation of the equipment.
Stainless Steel work tables are designed for ingredient prep, plating your menu items,
holding utensils and countertop equipment until needed and otherwise creating an
outsized enough space for your kitchen staff to figure . Heavy duty and sturdy ,
work tables increase work space but with an undershelf or overshelf also can
increase space for storing . stainless steel work tables are available in many various
sizes left to right and front to back, allowing you to seek out the precise units for
your space and kitchen configuration.
Steel workbench
1.0mm thick electrolytic galvanized steel sheet-passed japanese industrial standard jsi. Surfaces epoxy resin power % epoxy-polyester power finishes.
Handle: inlaid aluminum handle
Adjustable leg underneath the cabinet with adjustment of 30-40mm, assuring horizon of the cabinet
We have over 100 colour to select. Exceptional durability and color retention.
Main Description for Custom CNC Router:
1) Automatic Too Changer: An ATC CNC Router automatically changes cutters between tool paths and eliminates the need for the CNC operator to change and zero tools individually. The ATC Wood Router allows customers to do the full job, even when different tooling is required to make different types of cuts â?? like cabinets and furniture â?? or where different bits are needed for roughing and finishing passes â?? like signs and complex 3D carvings. An ATC can perform operations normally done on other pieces of equipment, eliminating the need for additional machines in the shop. Save CNC Router Machine cost and labor cost from the very beginning. ATC CNC Wood Router is suitable for wood, MDF, plywood, PVC, Acyclic, Aluminum engraving, cutting, and milling.
2) Syntec Controller System: Syntec controller which is professional for Wood CNC Router with more than 20-year experience, easy to learn and operate.
3) Powerful Vacuum Table: The machine has a high-pressure vacuum table that can hold-down very small size material and reduces waste.
Solid and Rigid Machine Structure: A rigid, welded steel frame, fitted with a powerful vacuum table creates a strong structure to support the most demanding process.
4) Multiple Spindles: These spindles can perform the same job at the same time or can use different tools to perform different tasks separately like a tool changer to reduce time and labor costs. For mass production factories with limited budgets, this machine is an ideal solution. It can make a machine with multitasking and a machine with an automatic tool change function.
5) Double Working Table: Can use different tools to perform different tasks separately to reduce time and labor costs.
Applicable materials of CNC router with Double Working Table:
1) Mould: wood, wax, wood, plaster, foam
2) Furniture: wooden doors, cabinets, panels, office and wooden furniture, tables, chairs, doors, and windows.
Horizontal Laminar complete SS 304 GMP model.Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of stainless steel (SS-304grade)
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
Work Table: Stainless Steel (SS-304 grade)
Power Selections
38HP Gas
35HP Diesel
25HP 3Ph Electric
Max. Log Diameter 36"
Max. Width of Cut 28"
Wide - 34"
Max. Depth of Cut 10-1/2"
Max. Length of Cut 21'
Max. Length of Cut w/ Bed Extensions 45'
Bed Extensions 6', 12', or 24' Bed Extensions
Max. Log Weight 4,400 lbs
Sawhead Forward/Reverse
High-Output 12V Electric Power Feed
Sawhead Up/Down Electric with Accuset2 Setworks
Side Supports
4 Hydraulic Side Supports
Log Clamps 1 Hydraulic
Bed Leveling Feet 6 Adjustable Outriggers
Trailer Package Standard
Blade Lubrication 5 Gal. Water Tank with Automatic Flow
We understand the needs of each pathology professional and, accordingly, with our products with high quality, ergonomics, superior safety and high technology, we offer solutions that are suitable for the workflows required by each laboratory and increase user safety to the maximum level.
Features
- All stainless-steel construction made of stainless steel 304, working plate stainless steel 316
- Material thickness: 2.0mm for working table, other panels 1.2mm
- Both manual and hands-free proximity controls for:
o Cold and hot water faucet
o Led lighting
o Table rinse
o Waste grinder
o Exhaust fan
- Back and downdraft ventilation
- Safety glasses for both sides and front
- 3 options available for ventilation:
o Without fan
o Inbuilt fan with filter
o External exhaust fan system
- Removable perforated plates on working plate
- Deep sink
- Mixer shower spray with extended hose
- Formalin tap and collection sink
- Vacuum breaker-protected water supply
- Shelf with safety glass
- Electrical outlets with waterproof cover
- Magnetic tool bar
- Polyethylene cutting board
- �½ horsepower waste grinder
- Led light with dimmer
Material :steel frame and legs, wood top
Size: H730*l1200*d750mm H750*l1500*d750mm
Customized length
Tabletop: 30 or 50mm thickness complex material , other material is negotiable.
" macromolecule composite , fireproof board stainless steel coverage iron plate compound board
Frame:main frame material :30*60mm .Thickness of legs are 2.5mmadjustable legs
Thickness of cabinets: The two small drawer : w531*d410*h60*mm capacity:30kg thickness of cabinets are 0.6mm
The one middle drawer: w531*d410*h195mm
The one large drawer : w531*d410*h125mm thickness of cabinets are 0.6mm
Surface treatment:all metal parts are to be treated with anti-rust and finished with powder coating
Accessory:cabinets and drawers can be chosen to be assembled with workbench
Socket , lighting rack , hanger, shelf , square-hole hanging board, louvered hanging board , plastic box
Package: In standard export carton with multi-layer polyfoam inner lining
Payment: Tt paypal l/c.
The size :h750*l1200/1500*w750mm
The material: cold rolled steel
A Handcrafted Utiity Home Decor Wooden Stool Table/ End Table by OF HANDICRAFTS. It Has Antique look with brown & Black base color. Multicolor Emboss Painting has been done on this piece of handicraft furniture. Perfectly Handcrafted by the talented Artisans
Product Dimensions : L 42 x B 23.5 x W 23.5 cm
Weight : 2638 grams
Base Material : Wood
Art Work : Emboss Work
116257 Working Table Suppliers
Short on time? Let Working Table sellers contact you.
