Classical Structure Design : Brand new camera beam design makes the entire structure of the wheel alignment system rational and grand. Versatile structures are optional.
Golden Eyes : Superior lens can adapt to strict outside environment and filtrate the stray light with wider angle to capture and read the target diskcs appropriately. This will increase the accuracy of 3D wheel alignment.
High-resolution Camera : With two imported high-resolution cameras and the fast and stable central computer system, transmission of the picture can reach 15 frames per second to make the measuring result be displayed continually.
Target Disk : Target disks used in 3D wheel alignment are made of special materials which will not be broken even after falling from 10 meters height. The reflection materials with superior engineering film can last longer working life.
DOUBLE-DISPLAYING SYSTEM & OUTSTANDING FUNCTIONS
Intelligent LED Guide : With special design, flashing LED lamps offer dynamic feedback during measuring and monitor the measurement processes effectively.
3D-tech Compensation : Only one moving forward and backward can finish comprehensive compensation for errors caused by deformed rims or installation.
Four Wheels Reference Display: Toe, camber and their differences can be displayed on the screen simultaneously. Thus enhancing the visual display of 3D wheel alignment system.
Front/Rear Wheel Reference Display : The front and rear wheel reference can be displayed simultaneously adapting to different operators requirements.
Voice-over System : Advanced automotive voice-over will guide every step of wheel aligning operator.
Body Dimension : Unique 3D wheel alignment body measurement system can measure chassis parameters, such as wheelbase, track width and axle offset.
Caster/S.A.I. Measurement : Simultaneously measurement of caster, S.A.I. and inclusive angle can diagnose the accelerator off-tracking, the weight of steering wheel boosting and other factors.
Four Wheels Toe/Camber Display : The data of teo and camber for four wheels can be displayed simultaneously on the screen to provide effective reference.
Drive-on Camera : Special mirror function of the PC camera can guide the best parking position on the platform effectively.
Controllable Lifting Pole : In the process of operating, the pole can be adjusted up to 2.1 meters according to the height of vehicle at any time with a remote.
Features
* Infrared 8-beam and 16-sensor loop measurement, accurate and stable.
* Newly developed ccd signal processing technology, nearly uninfluenced by the strong sunlight.
* Complete system upgrading function.
* Unique voice prompt function and visualized animation, very easy to understand.
* Trustworthy operating system to give more convenient and safe operations.
* Keyboard quick switch operation.
* Both special version and common version are provided for user to select.
* Both normal version and demonstration version are provided to make user's training more convenient and quick.
* Large capacity (4000mah) lithium battery with low power consumption and dormancy mode of design.
* Camber, toe-in, battery electricity quantity, charging status and electronic level, etc. Can be real-time displayed by LCD.
* In-block type of casting aluminum alloy probe rods can strongly guarantee the stability and the test precision of the product.
Sensor diagnosis function
Error message alarm function
Symptom inspection function
Preliminary inspection function
User friendly configuration function
Speedy work stage selection function
Cuntomer vehiclc data management function
Standard rf wireless features provides extended range, high-speed communications
Latest vehicle spec db& advanced date management system
Dimension: 1350*900*1350mm
G.W.: 250kgs
N.W.:210kgs
Export standard packing
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
1. High-Resolution 8 sensors CCD (Charge-Coupled Device) Measuring System.
2. DSP High-Speed Processor. Highly integrated microprocessor provides immediate response between changes in actual measurement and displayed values.
3. Cordless XF-Radio technology Provides Extended Range, High-Speed Communication; Cables Connection also provided.
4. Rugged, Lightweight Design. Integrated electronic components enhance reliability. Outer sensor cover is made of special material, light and strong.
5. Cal-Check Toe Calibration. Sensors feature rear toe arms for total around-the-car toe calibration checking. Continuous checking ensures accurate toe measurements.
6. Level Reminder--Electronic level. An on-screen display indicates if sensor leveling is required.
7. Range Finder. Range Finder feature calculates track width and wheelbases up to 210 inches (5334 mm).
8. Continuous Runout Compensation. Each sensor allows for an easy, precise 4-point ROC Technology, which ensures that the sensor will continue to read accurate alignment angles, even if any wheels rotate.
9. Self-Centering Wheel Adaptors cover an extended range of vehicles.
10. Measuring Head is Self-calibrated to maintain accuracy, and can be interchanged freely without re-calibration.
11. Rechargeable Batteries can provide two days of continuous operation; í¦Hot-swappableí¦ operation ensures compensation measurements are not lost in the event of a power outage or if battery power is low.
12. Ultra-low Chassis Measuring Technology.
13. Multi-language: English, Spanish, French, Russian, Portuguese, Arabic etc.
14. Windows XP Operating System.
15. More than 10,000 types of Auto Specifications Database updated to 2009, including latest domestic and oversea auto models.
16. User can add new auto Models to the Database or Upgrade the database through our website.
17. Brand PC of Lenovo or DELL supported, 19" LCD Monitor.
18. User-Friendly Operation Interface, quick, precise measurement readings, easy to Operate.
19. Simple and Reliable Design, Customer own Requirements Welcomed.
28947 Wheel Alignment Suppliers
Short on time? Let Wheel Alignment sellers contact you.
The measurement principle:
Forming the basis plane and position of the quadrilateral by the four wheel centers, constituting the angle of the wheel aligner by the geometric relationship between the wheel plane and wheel plane with the basic plane together. Calculating the axis of kingpin by the wheel rotation axis during the wheel steering. Constituting run-out compensation by the wheel rotation axis while vehicle moving and angle changes of the wheel plane geometry.
Four target reflectors are mounted above the vehicles four rims then scrolling wheel and continuous shooting the geometry of the reflective target board by the camera, analyzing the changes of the geometry by computer then to get the corresponding positional parameters of the wheels and chassis and so on.
The technology is the use of machine vision technology and computer information processing technology.
Product features:
Two industrial ccd digital camera, four target goals
The carts dynamic measurement. Can realize the automatic compensation of the positioning data, so that get more accurate measurement data
Simple operating. Four target plates hanging on the rim then push the car to complete the traditional positioning kingpin measurement except the kingpin
No need periodic calibration. Calibration is completed before leaving the factory.
Measurement and the tilt are independent of impact of level of platform
No electronic components on the target reflector board, very low failure rate.
Lifting measuring range up to 1 meter.
X-631 wheel aligner
Fast, simple, profitable, the 8-CCD sensor Wheel Aligner from Launch, wireless data transfer with bluetooth technology or 433 MHz radio module.
Professional, Reliable, Affordable
Professionel: 20 degree CCD Camera
6 meter wheel base
8 toe sensors
Fast radio data transfer
Time saving features:
Standard measurement
Fast test, short overview of toe, camber, thrust angle in a second
Additional test, for accident cars
Lower car function, no need for lowering clamps
Customer defined car data base
Reliable: Solid constructions of sensor heads
Water protected
Standard batteries
Standard high quality Pc
Self centring clamps, optional adapters for Aluminium rims available
Cable free measurement, removes hassle for broken cables
Affordable:: Unbeatable price / performance ratio
Designed for long time use
Feature
* Complete test: The X-631 Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, axle offset, front wheel setback and rear wheel setback, etc.
* Complete databank: wheel alignment data of over 10,000 vehicle models is stored in the system. User can also add new data to the databank.
* Kingpin and camber adjustment real time display function.
* HELP information for vehicle adjustment.
* Language operating prompt function.
* Emergency power supply and in-time charging function.
* The probe rods provide LCD display function.
* Electronic level function.
* Black box self-diagnosis function.
* Front and rear probe rods interchangeable.
* Special test for Mercedes-Benz and BMW vehicles.
Features
* Infrared 8-beam and 16-sensor loop measurement, accurate and stable.
* Newly developed CCD signal processing technology, nearly uninfluenced by the strong sunlight.
* Complete system upgrading function.
* Unique voice prompt function and visualized animation, very easy to understand.
* Trustworthy operating system to give more convenient and safe operations.
* Keyboard quick switch operation.
* Both special version and common version are provided for user to select.
* Both normal version and demonstration version are provided to make user's training more convenient and quick.
* Large capacity (4000mAh) Lithium battery with low power consumption and dormancy mode of design.
* Camber, toe-in, battery electricity quantity, charging status and electronic level, etc. can be real-time displayed by LCD.
* In-block type of casting Aluminum alloy probe rods can strongly guarantee the stability and the test precision of the product.
KWA-300 3D Wheel Aligner is a precision measurement instrument designed to measure the wheel alignment parameters and compare them with the specifications provided by vehicle manufacturer. It also gives instructions to the user for performing corresponding adjustments so as to get the best steering performance and reduce tire wear.
Functions and Features
Complete test: The KWA-300 3D Wheel Aligner can be used to measure the most wheel alignment parameters, such as front wheel toe-in, front wheel camber, caster, Kingpin inclination, maximal steering angle, thrust angle, toe-out on turns, rear wheel toe-in, rear wheel camber, thrust angle, wheelbase difference, tread difference, etc.
Brand new 3D computer vision measurement: Automatically test the aligning angles with high performance camera.
Positive targets: There are any electronic elements inside the targets, and no cables between the targets and the main unit, so the targets are easy to be fastened on the wheel clamps.
Provides many kinds of auto test processes and diagram operating interfaces, very simple and clear to operate; The whole test process can be performed automatically, and there are some humanity tips on the corresponding interfaces.
Complete databank: Wheel alignment data of over 20, 000 vehicle models is stored in the system. User can also add new data to the databank.
Automatically record the history data, easy for customer measurement.
Standard printer to print test result.
Provide real-time help with help system.
Characteristics of 3D Wheel Alignment
1.3D cameras alignmentùBased on the car and not influenced by the platform
2.Measurement systemùequipped with double digital cameras and four target disk, supplying revolutionary measurement mode
3.Target diskùThere is no electronic components, so the wheel alignment will not has a component failure problem.
4.Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5.Measurement progressùno need to compensate for steel ring , the precise eccentric compensation will be just once pulling or pushing the car back and forth
6.Software systemùùEasy to operate, complete conventional basic parameters within two minutes ,significantly faster than conventional aligners
7.Daily MaintenanceùEasily maintenance , download and upgrade freely for the model data.
1.Windows7 operating system , newest DK-42 software.
2.Easy to operate with guiding machine menu, to read alignment database within 3minutes.
3.The fault of machine can be reduced as no electric element & battery & transmission cable & bluetooth & infrared ray on the target plates.
4.HP computer, movable cabinet.
5.Calibration made before delivery, easy to install and use, no influenced by working site.
6.Wide range of sight with high performance digital camera.
7.Different colors of LED to show different step of operation.
8.User can operate different steps according to color changing on screen.
9.Set with Volkswagen dedicated application, can measure and adjust toe-arc for A6,B5.
10.26kinds of language for different countries and districts.
11.Suit for measurement of vehicle with super-low chassis.
12.OEM and other 25000 vehicle database.
1Windows7 operating system , 3D wheel alignment software
2Easy to operate with guiding menu, to read alignment database within 3 minutes
3The fault of machine can be reduced as no electric element & battery & transmission cable & bluetooth & infrared ray on the target plates
4HP computer
5Calibration made before delivery, convenient to install and use, no influenced by working site
6Set with Volkswagen dedicated application, can measure toe-arc for A6,B5
726kinds of language for different countries and districts
8Suit for measurement of vehicle with super-low chassis
9Integrative cabinet, simple but perfect
1025000 vehicle database, online updating
Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
Simultaneous Front and Rear wheel alignment (4,4)
Push Pull Runout /Setback / Thrust angle compensation
Lift level compensation at adjustment level
Unlimited memory for vehicle specifications
Option for selection of vehicle specification during alignment
Power failure data protection
Automatic tracking of Left & Right turns for Caster/Kingpin measurements
Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
Rear Setback & Track width difference,
Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
Effortless Toe (Easy Toe) adjustment program
Camber measurement at Zero Toe
Drag link adjustment
Toe out on Turns & Lock angle measurements
Animated pictorial display of angles during alignment
Zoom in option for live parameters
Two Color Bar display for adjustment of all angles
Quick Wheel Alignment program by user defined
Data Manager Software for storing alignment results
Customer Address in printout & customer data edit option
3-D Pictorial & Two color text printout
Multi-lingual program & Voice prompt
Two wheel Alignment program by fixing only front two target plates
1.Windows 7 operating system, newest DK-42 software.
2.Automatic adjustment for height of camera beam, automatic tracking the target plates.
3.automatic check for height of car lift, automatic calibrate the camera.
4.With black-box functions, all files can be saved for future analysis.
5.Quicker running for alignment with guiding menu, can read database within 3 minutes.
6.3D animated measurement, easy for training and operation.
7.Available for OEM vehicle database.
8.Maual enter height of vehicle.
9.Available for single-wheel positioning, two-wheel positioning, four-wheel positioning.
10.26 kinds of language for different countries and districts.
11.Instruction function for north star shims.
Introduction:
Android system for tablet PC, mobile phone and smart TV optional.
Portable 5 pieces of cameras for measurment workable in outdoor.
Shatter-resistant 8" target exchangeable for each wheel
WIFI communication among cameras, tablet PC, mobile phone, TV monitor, keyboard and mouse.
Voice prompt and improper operation display.
Suitable for passenger car, bus and truck with less than 6 meters long of wheel base.
Data update based on update APP.
Standard Accessary:
4 pieces of targets, 4 pieces of 24clamps,32LCD monitor with Android system, turntable, 2 pieces of wedge, steering wheel lock, foot brake depresser, wireless keyboard and mouse.
Technical Data
Measuring Item Accuracy Measuring Range
Toe ±0.01°or ±0.01 mm ±20°
Camber ±0.01° ±30°
Caster ±0.02° ±30°
Set Back ±0.01° ±20°
Thruste Angle ±0.01° ±20°
Wheel Track 1200-3000
Wheel Base 2000-5000
PC-free measurement mode
Remote control
Lcd digital display of battery capability, electronic horizeon, angle measurement
LED toe camber adjusting reminding
8 beam anti-distrubance full loop measurement
Sensor self-testing, individual changeable without calibration
Availabel wheel align parameter measurement
Front wheel toe, camber, kingpin caster, kingpin sai,
Hrust angle, maxumim turn angle
Wheelbase, track, setback, offset
Special measurement program
Any hang lift measurement
Altimetry, counterweight
Vag toe constant value measurement
Intelligent measurement ultra-low chassis and refitted vehicles
Conventional function
Switch measurement interface by one key
Calibrate parameters unit exchange
Animatiion suspension adjustment guidance
User database
Eccentricity compensation
Front wheel align measurement
Animation operation guidance
Special function:
Fast measurement
Self-test function when the calibration value is incorrect.
The lift horizontal compensation
Sensor working log
Voice reminding system.
H-380 Professional high-end model
Voice navigation 19 inch LCD screen
Sensor configuration:
PC-Free Measurement Mode
Remote control
LCD digital display of battery capability,electronic horizeon, angle measurement
LED toe camber adjusting reminding
8 beam Anti-distrubance full loop measurement
Sensor self-testing, individual changeable without calibration
Availabel Wheel align parameter measurement
Front wheel Toe, Camber, Kingpin caster, Kingpin SAI,
hrust Angle, maxumim turn angle
Wheelbase,track,setback,offset
Special measurement program:
Any hang lift measurement
Altimetry,counterweight
VAG toe constant value measurement
Intelligent measurement ultra-low chassis and refitted vehicles
Conventional function:
Switch measurement interface by one key
Calibrate parameters unit exchange
Animatiion Suspension adjustment guidance
User database
Eccentricity Compensation
Front wheel align measurement
Animation operation guidance
Special function:
fast measurement
Self-test function when the calibration value is incorrect.
the lift horizontal compensation
sensor working log
Voice Reminding system.
Sensor diagnosis function
Error message alarm function
Symptom inspection function
Preliminary inspection function
User friendly configuration function
Speedy work stage selection function
Customers vehicle data management function
Standard rf wireless features provides extended range, high-speed communications
Latest vehicle spec db& advanced date management system.
28947 Wheel Alignment Suppliers
Short on time? Let Wheel Alignment sellers contact you.
